Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

Analog Switch Single DP3T 12-Pin UQFN T/R, TS3USBA225RUTR, Texas Instruments

The TS3USBA225 is a double-pole, triple throw (DP3T) multiplexer that supports USB 2.0 High-Speed (480 Mbps) signals in all 3 differential channels. The first two high-speed channels also support Mobile High Definition Link (MHL) signaling with video data rates up to 720p, 60fps and 1080i, 30fps. One of the differential channels can also be used as an audio switch that is designed to allow audio signals to swing negatively. This configuration allows the system designer to use a common connector for audio and USB data.The TS3USBA225 has a VCC range of 2.7 V to 4.3 V with the capability to pass true-ground audio signals down to –1.8 V. The device also supports a power-down mode that can be enabled when both SEL controls are low to minimize current consumption when no signal is transmitting. The TS3USBA225 also features internal shunt resistors on the audio path to reduce clicks and pops that may be heard when the audio switches are selected.

  • 2.7-V to 4.3-V Operating Power Supply (VCC)
  • MHL/High-Speed USB (480Mbps) Switch:
    • VI/O Accepts Signals up to 4.3 V (Independent of VCC)
    • 6.5 O RDSON Typical
    • 3 pF CON Typical
    • 1.9 GHz Bandwidth (–3 dB)
  • Audio Switch:
    • 2.5 O RDSON Typical
    • Negative Rail Capability –1.8 V to VCC
    • Low THD: < 0.05%
    • Internal Shunt Resistors for Click-and-Pop Reduction
  • 1.8-V Compatible Control Input (SEL1 and SEL2) Threshold
  • Minimized Current Consumption (~5 µA) in Power-Down Mode
  • Power-Off Protection: All I/O Pins are High-Z when VCC= 0 V
  • 12-Pin QFN Package (2 × 1.7 mm, 0.4-mm pitch)
  • ESD Performance Tested per JESD 22
    • 2000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)

    • Характеристики

    Бренд

    Operating_temp

    -40 to 85 °C
    Output_signal_type

    Differential
    Pin_count

    12
    Polarity

    Non-Inverting
    Power_supply_type

    Single
    Product_dimensions

    2 x 1.7 x 0.5 mm
    Schedule_b

    8542390000
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3USBA225&&fileType=pdf
    Number_of_outputs_per_chip

    3
    Supplier_package

    UQFN
    Max_on_resistance_range

    5 to 10 Ohm
    Operating_supply_current

    0.05@3.6V
    Operating_supply_voltage

    2.7, 3 V, 4.3
    Number_of_inputs_per_chip

    2
    Max_data_rate

    480 Mbps
    Chip_enable_signals

    Yes
    Конфигурация

    Single DP3T
    Country_of_origin

    China
    Eccn

    EAR99
    Htsn

    8542390001
    Input_signal_type

    Differential
    Kind

    Analog Switch
    Lead_finish

    Gold
    Max_on_resistance

    7.5@3V Ohm
    Max_processing_temp

    260
    Max_propagation_delay_btb

    0.25@3.3 ns
    Max_turn_on_time

    40000@2.7V ns
    Mounting

    Surface Mount
    Msl_level

    1
    Number_of_channels_per_chip

    1
    Артикул: TS3USBA225RUTR

    Описание

    The TS3USBA225 is a double-pole, triple throw (DP3T) multiplexer that supports USB 2.0 High-Speed (480 Mbps) signals in all 3 differential channels. The first two high-speed channels also support Mobile High Definition Link (MHL) signaling with video data rates up to 720p, 60fps and 1080i, 30fps. One of the differential channels can also be used as an audio switch that is designed to allow audio signals to swing negatively. This configuration allows the system designer to use a common connector for audio and USB data.The TS3USBA225 has a VCC range of 2.7 V to 4.3 V with the capability to pass true-ground audio signals down to –1.8 V. The device also supports a power-down mode that can be enabled when both SEL controls are low to minimize current consumption when no signal is transmitting. The TS3USBA225 also features internal shunt resistors on the audio path to reduce clicks and pops that may be heard when the audio switches are selected.

  • 2.7-V to 4.3-V Operating Power Supply (VCC)
  • MHL/High-Speed USB (480Mbps) Switch:
    • VI/O Accepts Signals up to 4.3 V (Independent of VCC)
    • 6.5 O RDSON Typical
    • 3 pF CON Typical
    • 1.9 GHz Bandwidth (–3 dB)
  • Audio Switch:
    • 2.5 O RDSON Typical
    • Negative Rail Capability –1.8 V to VCC
    • Low THD: < 0.05%
    • Internal Shunt Resistors for Click-and-Pop Reduction
  • 1.8-V Compatible Control Input (SEL1 and SEL2) Threshold
  • Minimized Current Consumption (~5 µA) in Power-Down Mode
  • Power-Off Protection: All I/O Pins are High-Z when VCC= 0 V
  • 12-Pin QFN Package (2 × 1.7 mm, 0.4-mm pitch)
  • ESD Performance Tested per JESD 22
    • 2000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)

    • Детали

    Бренд

    Operating_temp

    -40 to 85 °C
    Output_signal_type

    Differential
    Pin_count

    12
    Polarity

    Non-Inverting
    Power_supply_type

    Single
    Product_dimensions

    2 x 1.7 x 0.5 mm
    Schedule_b

    8542390000
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3USBA225&&fileType=pdf
    Number_of_outputs_per_chip

    3
    Supplier_package

    UQFN
    Max_on_resistance_range

    5 to 10 Ohm
    Operating_supply_current

    0.05@3.6V
    Operating_supply_voltage

    2.7, 3 V, 4.3
    Number_of_inputs_per_chip

    2
    Max_data_rate

    480 Mbps
    Chip_enable_signals

    Yes
    Конфигурация

    Single DP3T
    Country_of_origin

    China
    Eccn

    EAR99
    Htsn

    8542390001
    Input_signal_type

    Differential
    Kind

    Analog Switch
    Lead_finish

    Gold
    Max_on_resistance

    7.5@3V Ohm
    Max_processing_temp

    260
    Max_propagation_delay_btb

    0.25@3.3 ns
    Max_turn_on_time

    40000@2.7V ns
    Mounting

    Surface Mount
    Msl_level

    1
    Number_of_channels_per_chip

    1

    Похожие товары