Analog Switch Quad SPDT 16-Pin VQFN EP T/R, TS3V330RGYR, Texas Instruments

The TS3V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer, with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data path of the multiplexer/demultiplexer.Low differential gain and phase make this switch ideal for composite and RGB video applications. This device has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. This switch maintains isolation during power off.To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Low Differential Gain and Phase (DG = 0.82%, DP = 0.1 Degree Typ)
  • Wide Bandwidth (BW = 300 MHz Min)
  • Low Crosstalk (XTALK = -80 dB Typ)
  • Low Power Consumption (ICC = 10 µA Max)
  • Bidirectional Data Flow With Near-Zero Propagation Delay
  • Low ON-State Resistance (ron = 3 O Typ)
  • Rail-to-Rail Switching on Data I/O Ports (0 to VCC)
  • VCC Operating Range From 3 V to 3.6 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Data and Control Inputs Provide Undershoot Clamp Diode
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Suitable for Both RGB and Composite-Video Switching
  • Характеристики

    Бренд

    Chip_enable_signals

    Yes

    Output_signal_type

    Differential

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    4 x 3.5 x 0.8 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3V330&&fileType=pdf

    Number_of_outputs_per_chip

    8

    Supplier_package

    VQFN EP

    Max_on_resistance_range

    10 to 25 Ohm

    Operating_supply_current

    0.01@3.6V@-40C to 85C mA

    Operating_supply_voltage

    3 V, 3.6

    Number_of_inputs_per_chip

    4

    Operating_temp

    -40 to 85 °C

    Country_of_origin

    United States

    Конфигурация

    Quad SPDT

    Eccn

    EAR99

    Htsn

    8542390001

    Input_signal_type

    Single

    Kind

    Analog Switch

    Lead_finish

    Gold

    Max_high_lev_output_current

    128 mA

    Max_low_lev_output_current

    128 mA

    Max_on_resistance

    10@3V Ohm

    Max_processing_temp

    260

    Max_turn_on_time

    6.5@3.6V@-40C to 85C ns

    Mounting

    Surface Mount

    Msl_level

    2

    Number_of_channels_per_chip

    4

    Артикул: TS3V330RGYR

    Описание

    The TS3V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer, with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data path of the multiplexer/demultiplexer.Low differential gain and phase make this switch ideal for composite and RGB video applications. This device has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. This switch maintains isolation during power off.To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Low Differential Gain and Phase (DG = 0.82%, DP = 0.1 Degree Typ)
  • Wide Bandwidth (BW = 300 MHz Min)
  • Low Crosstalk (XTALK = -80 dB Typ)
  • Low Power Consumption (ICC = 10 µA Max)
  • Bidirectional Data Flow With Near-Zero Propagation Delay
  • Low ON-State Resistance (ron = 3 O Typ)
  • Rail-to-Rail Switching on Data I/O Ports (0 to VCC)
  • VCC Operating Range From 3 V to 3.6 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Data and Control Inputs Provide Undershoot Clamp Diode
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Suitable for Both RGB and Composite-Video Switching
  • Детали

    Бренд

    Chip_enable_signals

    Yes

    Output_signal_type

    Differential

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    4 x 3.5 x 0.8 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3V330&&fileType=pdf

    Number_of_outputs_per_chip

    8

    Supplier_package

    VQFN EP

    Max_on_resistance_range

    10 to 25 Ohm

    Operating_supply_current

    0.01@3.6V@-40C to 85C mA

    Operating_supply_voltage

    3 V, 3.6

    Number_of_inputs_per_chip

    4

    Operating_temp

    -40 to 85 °C

    Country_of_origin

    United States

    Конфигурация

    Quad SPDT

    Eccn

    EAR99

    Htsn

    8542390001

    Input_signal_type

    Single

    Kind

    Analog Switch

    Lead_finish

    Gold

    Max_high_lev_output_current

    128 mA

    Max_low_lev_output_current

    128 mA

    Max_on_resistance

    10@3V Ohm

    Max_processing_temp

    260

    Max_turn_on_time

    6.5@3.6V@-40C to 85C ns

    Mounting

    Surface Mount

    Msl_level

    2

    Number_of_channels_per_chip

    4