Analog Multiplexer Quad 2:1 20-Pin TSSOP T/R, TS5L100PWR, Texas Instruments

The TI TS5L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. When E is low, the switch is enabled and the I port is connected to the Y port. When E is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Wide Bandwidth (BW = 300 MHz Min)
  • Low Differential Crosstalk (XTALK = –60 dB Typ)
  • Low Power Consumption (ICC = 3 µA Max)
  • Bidirectional Data Flow, With Near-Zero Propagation Delay
  • Low ON-State Resistance (ron = 3 O Typ)
  • VCC Operating Range From 6 V to 6.5 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Data and Control Inputs Provide Undershoot Clamp Diode
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Suitable for Both 10 Base-T/100 Base-T Signaling
  • Характеристики

    Бренд

    Chip_enable_signals

    Yes

    Number_of_channels_per_chip

    4

    Number_of_outputs_per_chip

    4

    Output_signal_type

    Single-Ended

    Power_supply_type

    Single

    Max_low_lev_output_current

    128 mA

    Max_on_resist_range

    10 to 25 Ohm

    Number_of_inputs_per_chip

    8

    Конфигурация

    Quad 2:1

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    0.003@6.5V@0C to 70C mA

    Operat_supply_voltage

    6 V, 6.5

    Pin_count

    20

    Product_dimensions

    6.6 x 4.5 x 1.05 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS5L100&&fileType=pdf

    Артикул: TS5L100PWR

    Описание

    The TI TS5L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. When E is low, the switch is enabled and the I port is connected to the Y port. When E is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Wide Bandwidth (BW = 300 MHz Min)
  • Low Differential Crosstalk (XTALK = –60 dB Typ)
  • Low Power Consumption (ICC = 3 µA Max)
  • Bidirectional Data Flow, With Near-Zero Propagation Delay
  • Low ON-State Resistance (ron = 3 O Typ)
  • VCC Operating Range From 6 V to 6.5 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Data and Control Inputs Provide Undershoot Clamp Diode
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Suitable for Both 10 Base-T/100 Base-T Signaling
  • Детали

    Бренд

    Chip_enable_signals

    Yes

    Number_of_channels_per_chip

    4

    Number_of_outputs_per_chip

    4

    Output_signal_type

    Single-Ended

    Power_supply_type

    Single

    Max_low_lev_output_current

    128 mA

    Max_on_resist_range

    10 to 25 Ohm

    Number_of_inputs_per_chip

    8

    Конфигурация

    Quad 2:1

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    0.003@6.5V@0C to 70C mA

    Operat_supply_voltage

    6 V, 6.5

    Pin_count

    20

    Product_dimensions

    6.6 x 4.5 x 1.05 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS5L100&&fileType=pdf