Analog Multiplexer Dual 1:4 16-Pin SSOP T/R, TS5N214DBQR, Texas Instruments

The TS5N214 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distorion on the data bus. Specifically designed to support high-bandwidth applications, the TS5N214 provides an optimized interface solution ideally suited for broadband communications, networking, and data-intensive computing systems.The TS5N214 is a 2-bit 1-of-4 multiplexer/demultiplexer with separate output-enable (1OE, 2OE) inputs. The select (S0, S1) inputs control the data path of the multiplexer/demultiplexer. When OE is low, the multiplexer/demultiplexer is enabled and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the multiplexer/demultiplexer is disabled and a high-impedance state exists between the A and B ports.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry prevents damaging current backflow through the device when it is powered down. The device has isolation during power off.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 3 O Typ)
  • 0- to 10-V Switching on Data I/O Ports
  • Bidirectional Data Flow With Near-Zero Propagation Delay
  • Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 20 pF Max, B Port)
  • VCC Operating Range From 4.75 V to 5.25 V
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Supports Both Digital and Analog Applications: PCI Interface, Differential Signal Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating
  • Характеристики

    Бренд

    Number_of_channels_per_chip

    2

    Number_of_outputs_per_chip

    8

    Output_signal_type

    Differential

    Power_supply_type

    Single

    Max_propagation_delay_btb

    3@5V@-40C to 85C ns

    Max_low_lev_output_current

    100 mA

    Max_on_resist_range

    10 to 25 Ohm

    Number_of_inputs_per_chip

    2

    Конфигурация

    Dual 1:4

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    10@5.25V@-40C to 85C mA

    Operat_supply_voltage

    4.75, 5 V, 5.25

    Pin_count

    16

    Product_dimensions

    4.9 x 3.9 x 1.5 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS5N214&&fileType=pdf

    Артикул: TS5N214DBQR

    Описание

    The TS5N214 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distorion on the data bus. Specifically designed to support high-bandwidth applications, the TS5N214 provides an optimized interface solution ideally suited for broadband communications, networking, and data-intensive computing systems.The TS5N214 is a 2-bit 1-of-4 multiplexer/demultiplexer with separate output-enable (1OE, 2OE) inputs. The select (S0, S1) inputs control the data path of the multiplexer/demultiplexer. When OE is low, the multiplexer/demultiplexer is enabled and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the multiplexer/demultiplexer is disabled and a high-impedance state exists between the A and B ports.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry prevents damaging current backflow through the device when it is powered down. The device has isolation during power off.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 3 O Typ)
  • 0- to 10-V Switching on Data I/O Ports
  • Bidirectional Data Flow With Near-Zero Propagation Delay
  • Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 20 pF Max, B Port)
  • VCC Operating Range From 4.75 V to 5.25 V
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • Supports Both Digital and Analog Applications: PCI Interface, Differential Signal Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating
  • Детали

    Бренд

    Number_of_channels_per_chip

    2

    Number_of_outputs_per_chip

    8

    Output_signal_type

    Differential

    Power_supply_type

    Single

    Max_propagation_delay_btb

    3@5V@-40C to 85C ns

    Max_low_lev_output_current

    100 mA

    Max_on_resist_range

    10 to 25 Ohm

    Number_of_inputs_per_chip

    2

    Конфигурация

    Dual 1:4

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    10@5.25V@-40C to 85C mA

    Operat_supply_voltage

    4.75, 5 V, 5.25

    Pin_count

    16

    Product_dimensions

    4.9 x 3.9 x 1.5 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS5N214&&fileType=pdf