ADC Triple 170Msps 8-bit Parallel 100-Pin LQFP T/R, TDA9955HL/17/C1,518, NXP

The TDA9955HL is a triple 8-bit video converter interface. The TDA9955HL converts an RGB analog signal into a RGB or YUV (YCBCR) digital signal or converts a YUV (YPBPR) analog signal into a YUV (YCBCR) or RGB digital signal with a sampling rate up to 170 MHz. The TDA9955HL supports analog TV resolutions from 480i (720 × 480i at 60 Hz) to High-Definition TV (HDTV) (up to 1920 × 1080p at 60 Hz) and analog PC resolutions from VGA (640 × 480p at 60 Hz) to UXGA (1600 × 1200p at 60 Hz). The YUV digital output signal can be 4 : 4 : 4 or 4 : 2 : 2 ITU-R BT.656 standard or semi-planar format following the ITU-R BT.601 standard. All settings are controlled via the I2C-bus.

  • Triple 8-bit Analog-to-Digital Converter (ADC)
  • Three independent analog video sources, up to 170 MHz selectable via the I2C-bus
  • Analog composite sync slicer and recognition integrated
  • Frame and field detection for interlaced video signal
  • Video analog voltage input from 0.45 V to 0.9 V (p-p) to produce a full-scale ADC input of 1.0 V (p-p)
  • Three clamps for programming a 8-bit clamping code from 0 to +191 in steps of 1 LSB for RGB and YUV signals
  • Three video amplifiers controlled via I2C-bus to reach the full-scale resolution
  • Amplifier bandwidth of 100 MHz
  • Low gain variation with temperature
  • I2C-bus controlled Phase-Locked Loop (PLL) to generate the ADCs, formatter and output clocks which can be locked into a line frequency from 15 kHz to 95 kHz
  • Integrated PLL divider
  • Programmable clock phase adjustment cells
  • Matrix and offsets available for conversion of RGB or YUV signal coming from analog video sources into YUV or RGB
  • Output format RGB 4 : 4 : 4, YUV 4 : 4 : 4, YUV 4 : 2 : 2 ITU-R BT.656 or YUV4:2:2 semi-planar standard on output bus
  • Integrated downsampling-by-two with selectable filters on CB and CR channels in the 4:2:2 mode
  • IC controlled via the I2C-bus, 5 V tolerant and bit rate up to 400 kbit/s
  • TTL inputs 5 V tolerant
  • LV-TTL outputs
  • Power-down mode
  • 1.8 V and 3.3 V power supplies

Характеристики

Volt_supply_source

Analog and Digital

Eccn

EAR99

Sampling_rate

170 Msps

Volt_reference

External, Internal

Digital_supply_support

Yes

Resolution

8 Bit

Typical_power_dissipation

750 mW

Differential_nonlinearity

0.7 LSB

Signal_to_noise_ratio

45 dB

Input_type

Voltage

Input_signal_type

Single-Ended

Input_volt

0.7 V

Бренд

Number_of_analog_inputs

6

Max_power_dissipation

945 mW

Htsn

8542390001

Mounting

Surface Mount

Operating_temp

0 to 70 °C

Pin_count

100

Product_dimensions

14.1 x 14.1 x 1.45 mm

Schedule_b

8542390000

Specifications

http://www.nxp.com/documents/data_sheet/BFG403W.pdf

Supplier_package

LQFP

Number_of_adc_channels

2

Polarity_of_input_volt

Unipolar

Operating_supply_volt

1.75/3.15, 1.8/3.3 V, 1.85/3.45

Number_of_adcs

3

Digital_interface_type

Parallel

Артикул: TDA9955HL/17/C1,518

Описание

The TDA9955HL is a triple 8-bit video converter interface. The TDA9955HL converts an RGB analog signal into a RGB or YUV (YCBCR) digital signal or converts a YUV (YPBPR) analog signal into a YUV (YCBCR) or RGB digital signal with a sampling rate up to 170 MHz. The TDA9955HL supports analog TV resolutions from 480i (720 × 480i at 60 Hz) to High-Definition TV (HDTV) (up to 1920 × 1080p at 60 Hz) and analog PC resolutions from VGA (640 × 480p at 60 Hz) to UXGA (1600 × 1200p at 60 Hz). The YUV digital output signal can be 4 : 4 : 4 or 4 : 2 : 2 ITU-R BT.656 standard or semi-planar format following the ITU-R BT.601 standard. All settings are controlled via the I2C-bus.

  • Triple 8-bit Analog-to-Digital Converter (ADC)
  • Three independent analog video sources, up to 170 MHz selectable via the I2C-bus
  • Analog composite sync slicer and recognition integrated
  • Frame and field detection for interlaced video signal
  • Video analog voltage input from 0.45 V to 0.9 V (p-p) to produce a full-scale ADC input of 1.0 V (p-p)
  • Three clamps for programming a 8-bit clamping code from 0 to +191 in steps of 1 LSB for RGB and YUV signals
  • Three video amplifiers controlled via I2C-bus to reach the full-scale resolution
  • Amplifier bandwidth of 100 MHz
  • Low gain variation with temperature
  • I2C-bus controlled Phase-Locked Loop (PLL) to generate the ADCs, formatter and output clocks which can be locked into a line frequency from 15 kHz to 95 kHz
  • Integrated PLL divider
  • Programmable clock phase adjustment cells
  • Matrix and offsets available for conversion of RGB or YUV signal coming from analog video sources into YUV or RGB
  • Output format RGB 4 : 4 : 4, YUV 4 : 4 : 4, YUV 4 : 2 : 2 ITU-R BT.656 or YUV4:2:2 semi-planar standard on output bus
  • Integrated downsampling-by-two with selectable filters on CB and CR channels in the 4:2:2 mode
  • IC controlled via the I2C-bus, 5 V tolerant and bit rate up to 400 kbit/s
  • TTL inputs 5 V tolerant
  • LV-TTL outputs
  • Power-down mode
  • 1.8 V and 3.3 V power supplies

Детали

Volt_supply_source

Analog and Digital

Eccn

EAR99

Sampling_rate

170 Msps

Volt_reference

External, Internal

Digital_supply_support

Yes

Resolution

8 Bit

Typical_power_dissipation

750 mW

Differential_nonlinearity

0.7 LSB

Signal_to_noise_ratio

45 dB

Input_type

Voltage

Input_signal_type

Single-Ended

Input_volt

0.7 V

Бренд

Number_of_analog_inputs

6

Max_power_dissipation

945 mW

Htsn

8542390001

Mounting

Surface Mount

Operating_temp

0 to 70 °C

Pin_count

100

Product_dimensions

14.1 x 14.1 x 1.45 mm

Schedule_b

8542390000

Specifications

http://www.nxp.com/documents/data_sheet/BFG403W.pdf

Supplier_package

LQFP

Number_of_adc_channels

2

Polarity_of_input_volt

Unipolar

Operating_supply_volt

1.75/3.15, 1.8/3.3 V, 1.85/3.45

Number_of_adcs

3

Digital_interface_type

Parallel