ADC Single SAR 76ksps 8-bit Serial 28-Pin PLCC Tube, TLC545CFN, Texas Instruments

The TLC545 and TLC546 are CMOS analog-to-digital converters built around an 8-bit switched capacitor successive-approximation analog-to-digital converter. They are designed for serial interface to a microprocessor or peripheral via a 3-state output with up to four control inputs including independent SYSTEM CLOCK, I/O CLOCK, chip select (CS), and ADDRESS INPUT. A 4-MHz system clock for the TLC545 and a 2.1-MHz system clock for the TLC546 with a design that includes simultaneous read/write operation allowing high-speed data transfers and sample rates of up to 76,923 samples per second for the TLC545, and 40,000 samples per second for the TLC546.In addition to the high-speed converter and versatile control logic, there is an on-chip 20-channel analog multiplexer that can be used to sample any one of 19 inputs or an internal self-test voltage, and a sample-and-hold that can operate automatically or under microprocessor control. The converters incorporated in the TLC545 and TLC546 feature differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and analog circuitry isolation from logic and supply noises. A totally switched capacitor design allows low-error (±0.5 LSB) conversion in 9 us for the TLC545, and 17 us for the TLC546, over the full operating temperature range. The TLC545C and the TLC546C are characterized for operation from 0°C to 70°C. The TLC545I and the TLC546I are characterized for operation from -40°C to 85°C.

  • 8-Bit Resolution A/D Converter
  • Microprocessor Peripheral or Stand-Alone Operation
  • On-Chip 20-Channel Analog Multiplexer
  • Built-in Self-Test Mode
  • Software-Controllable Sample and Hold
  • Total Unadjusted Error . . . ±0.5 LSB Max
  • Timing and Control Signals Compatible With 8-Bit TLC540 and 10-Bit TLC1540 A/D Converter Families
  • CMOS Technology
  • Характеристики

    Volt_supply_source

    Single

    Number_of_analog_inputs

    19

    Sampling_rate

    76 ksps

    Volt_reference

    External

    Digital_supply_support

    No

    Architecture

    SAR

    Resolution

    8 Bit

    Input_type

    Voltage

    Input_signal_type

    Single-Ended

    Input_volt

    5 V

    Бренд

    Msl_level

    1

    Country_of_origin

    Philippines

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    15 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    0 to 70 °C

    Pin_count

    28

    Product_dimensions

    11.51 x 11.51 x 4.06 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TLC545&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    4.75, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Serial (SPI)

    Артикул: TLC545CFN

    Описание

    The TLC545 and TLC546 are CMOS analog-to-digital converters built around an 8-bit switched capacitor successive-approximation analog-to-digital converter. They are designed for serial interface to a microprocessor or peripheral via a 3-state output with up to four control inputs including independent SYSTEM CLOCK, I/O CLOCK, chip select (CS), and ADDRESS INPUT. A 4-MHz system clock for the TLC545 and a 2.1-MHz system clock for the TLC546 with a design that includes simultaneous read/write operation allowing high-speed data transfers and sample rates of up to 76,923 samples per second for the TLC545, and 40,000 samples per second for the TLC546.In addition to the high-speed converter and versatile control logic, there is an on-chip 20-channel analog multiplexer that can be used to sample any one of 19 inputs or an internal self-test voltage, and a sample-and-hold that can operate automatically or under microprocessor control. The converters incorporated in the TLC545 and TLC546 feature differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and analog circuitry isolation from logic and supply noises. A totally switched capacitor design allows low-error (±0.5 LSB) conversion in 9 us for the TLC545, and 17 us for the TLC546, over the full operating temperature range. The TLC545C and the TLC546C are characterized for operation from 0°C to 70°C. The TLC545I and the TLC546I are characterized for operation from -40°C to 85°C.

  • 8-Bit Resolution A/D Converter
  • Microprocessor Peripheral or Stand-Alone Operation
  • On-Chip 20-Channel Analog Multiplexer
  • Built-in Self-Test Mode
  • Software-Controllable Sample and Hold
  • Total Unadjusted Error . . . ±0.5 LSB Max
  • Timing and Control Signals Compatible With 8-Bit TLC540 and 10-Bit TLC1540 A/D Converter Families
  • CMOS Technology
  • Детали

    Volt_supply_source

    Single

    Number_of_analog_inputs

    19

    Sampling_rate

    76 ksps

    Volt_reference

    External

    Digital_supply_support

    No

    Architecture

    SAR

    Resolution

    8 Bit

    Input_type

    Voltage

    Input_signal_type

    Single-Ended

    Input_volt

    5 V

    Бренд

    Msl_level

    1

    Country_of_origin

    Philippines

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    15 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    0 to 70 °C

    Pin_count

    28

    Product_dimensions

    11.51 x 11.51 x 4.06 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TLC545&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    4.75, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Serial (SPI)