ADC Single SAR 400ksps 12-bit Parallel 24-Pin QSOP, MAX1292AEEG+, Maxim Integrated

The MAX1290/MAX1292 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply. Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1290/MAX1292 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1290 has eight input channels and the MAX1292 has four input channels (four and two input channels, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements. The MAX1290/MAX1292 tri-states active-low INT when active-low CS goes high. Refer to MAX1262/MAX1264 if tri-stating active-low INT is not desired. The MAX1290 is available in a 28-pin QSOP package, while the MAX1292 comes in a 24-pin QSOP. For pin-compatible +3V, 12-bit versions, refer to the MAX1291/MAX1293 data sheet.

  • 12-Bit Resolution, ±0.5 LSB Linearity
  • +5V Single-Supply Operation
  • User-Adjustable Logic Level (+2.7V to +5.5V)
  • Internal +2.5V Reference
  • Software-Configurable Analog Input Multiplexer
    • 8-Channel Single-Ended/4-Channel Pseudo-Differential (MAX1290)
    • 4-Channel Single-Ended/2-Channel Pseudo-Differential (MAX1292)
  • Software-Configurable Unipolar/Bipolar Analog Inputs
  • Low Current:
    • 2.5mA (400ksps)
    • 1.0mA (100ksps)
    • 400µA (10ksps)
    • 2µA (Shutdown)
  • Internal 6MHz Full-Power Bandwidth Track/Hold
  • Byte-Wide Parallel (8 + 4) Interface
  • Small Footprint:
    • 28-Pin QSOP (MAX1290)
    • 24-Pin QSOP (MAX1292)
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    4, 2

    Sampling_rate

    400 ksps

    Volt_reference

    External, Internal

    Typical_power_dissipation

    9.5 mW

    Differential_nonlinearity

    1 LSB

    Input_type

    Voltage

    Input_signal_type

    Pseudo-Differential, Single-Ended

    Input_volt

    ±1.25 V, 2.5

    Бренд

    Msl_level

    1

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    762 mW

    Max_processing_temp

    260, 300

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    24

    Product_dimensions

    8.74 x 3.99 x 1.55 mm

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS03114/MAXMS03114-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    QSOP

    Number_of_adc_channels

    2, 4

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    4.5, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel

    Артикул: MAX1292AEEG+

    Описание

    The MAX1290/MAX1292 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply. Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1290/MAX1292 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1290 has eight input channels and the MAX1292 has four input channels (four and two input channels, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements. The MAX1290/MAX1292 tri-states active-low INT when active-low CS goes high. Refer to MAX1262/MAX1264 if tri-stating active-low INT is not desired. The MAX1290 is available in a 28-pin QSOP package, while the MAX1292 comes in a 24-pin QSOP. For pin-compatible +3V, 12-bit versions, refer to the MAX1291/MAX1293 data sheet.

    • 12-Bit Resolution, ±0.5 LSB Linearity
    • +5V Single-Supply Operation
    • User-Adjustable Logic Level (+2.7V to +5.5V)
    • Internal +2.5V Reference
    • Software-Configurable Analog Input Multiplexer
      • 8-Channel Single-Ended/4-Channel Pseudo-Differential (MAX1290)
      • 4-Channel Single-Ended/2-Channel Pseudo-Differential (MAX1292)
  • Software-Configurable Unipolar/Bipolar Analog Inputs
  • Low Current:
    • 2.5mA (400ksps)
    • 1.0mA (100ksps)
    • 400µA (10ksps)
    • 2µA (Shutdown)
  • Internal 6MHz Full-Power Bandwidth Track/Hold
  • Byte-Wide Parallel (8 + 4) Interface
  • Small Footprint:
    • 28-Pin QSOP (MAX1290)
    • 24-Pin QSOP (MAX1292)
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    4, 2

    Sampling_rate

    400 ksps

    Volt_reference

    External, Internal

    Typical_power_dissipation

    9.5 mW

    Differential_nonlinearity

    1 LSB

    Input_type

    Voltage

    Input_signal_type

    Pseudo-Differential, Single-Ended

    Input_volt

    ±1.25 V, 2.5

    Бренд

    Msl_level

    1

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    762 mW

    Max_processing_temp

    260, 300

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    24

    Product_dimensions

    8.74 x 3.99 x 1.55 mm

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS03114/MAXMS03114-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    QSOP

    Number_of_adc_channels

    2, 4

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    4.5, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel