ADC Single SAR 1Msps 10-bit Serial 38-Pin TSSOP Tube, ADS7957SDBT, Texas Instruments

The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold. The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications. A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts. The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP. The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle. There are two software selectable input ranges (0V – 2.5V and 0V – 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel. These features make the devices suitable for most data acquisition applications. The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds. The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

  • 1-MHz Sample Rate Serial Devices
  • Product Family of 12/10/8-Bit Resolution
  • Zero Latency
  • 20-MHz Serial Interface
  • Analog Supply Range: 2.7 to 5.25V
  • I/O Supply Range: 1.7 to 5.25V
  • Two SW Selectable Unipolar, Input Ranges: 0 to 2.5V and 0 to 5V
  • Auto and Manual Modes for Channel Selection
  • 12,8,4-Channel Devices can Share 16 Channel Device Footprint
  • Two Programmable Alarm Levels per Channel
  • Four Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devices
  • Typical Power Dissipation: 14.5 mW (+VA = 5V, +VBD = 3V) at 1 MSPS
  • Power-Down Current (1 µA)
  • Input Bandwidth (47 MHz at 3dB)
  • 38-,30-Pin TSSOP and 32-,24-Pin QFN Packages
  • APPLICATIONS
    • PLC / IPC
    • Battery Powered Systems
    • Medical Instrumentation
    • Digital Power Supplies
    • Touch Screen Controllers
    • High-Speed Data Acquisition Systems
    • High-Speed Closed-Loop Systems
  • Характеристики

    Volt_supply_source

    Single

    Eccn

    EAR99

    Number_of_adcs

    1

    Operating_supply_volt

    2.7, 3.3 V, 5.25

    Polarity_of_input_volt

    Unipolar

    Supplier_package

    TSSOP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS7954&&fileType=pdf

    Schedule_b

    8542390000

    Product_dimensions

    9.7 x 4.4 x 1.15 mm

    Pin_count

    38

    Operating_temp

    -40 to 125 °C

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Gold

    Htsn

    8542390001

    Country_of_origin

    United States

    Number_of_analog_inputs

    16

    Msl_level

    2

    Бренд

    Input_volt

    2.5, 5 V

    Input_signal_type

    Single-Ended

    Input_type

    Voltage

    Signal_to_noise_ratio

    60 dB

    Differential_nonlinearity

    0.5 LSB

    Typical_power_dissipation

    14.5 mW

    Resolution

    10 Bit

    Architecture

    SAR

    Digital_supply_support

    No

    Volt_reference

    External

    Sampling_rate

    1 Msps

    Digital_interface_type

    Serial (SPI)

    Артикул: ADS7957SDBT

    Описание

    The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold. The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications. A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts. The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP. The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle. There are two software selectable input ranges (0V – 2.5V and 0V – 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel. These features make the devices suitable for most data acquisition applications. The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds. The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

  • 1-MHz Sample Rate Serial Devices
  • Product Family of 12/10/8-Bit Resolution
  • Zero Latency
  • 20-MHz Serial Interface
  • Analog Supply Range: 2.7 to 5.25V
  • I/O Supply Range: 1.7 to 5.25V
  • Two SW Selectable Unipolar, Input Ranges: 0 to 2.5V and 0 to 5V
  • Auto and Manual Modes for Channel Selection
  • 12,8,4-Channel Devices can Share 16 Channel Device Footprint
  • Two Programmable Alarm Levels per Channel
  • Four Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devices
  • Typical Power Dissipation: 14.5 mW (+VA = 5V, +VBD = 3V) at 1 MSPS
  • Power-Down Current (1 µA)
  • Input Bandwidth (47 MHz at 3dB)
  • 38-,30-Pin TSSOP and 32-,24-Pin QFN Packages
  • APPLICATIONS
    • PLC / IPC
    • Battery Powered Systems
    • Medical Instrumentation
    • Digital Power Supplies
    • Touch Screen Controllers
    • High-Speed Data Acquisition Systems
    • High-Speed Closed-Loop Systems
  • Детали

    Volt_supply_source

    Single

    Eccn

    EAR99

    Number_of_adcs

    1

    Operating_supply_volt

    2.7, 3.3 V, 5.25

    Polarity_of_input_volt

    Unipolar

    Supplier_package

    TSSOP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS7954&&fileType=pdf

    Schedule_b

    8542390000

    Product_dimensions

    9.7 x 4.4 x 1.15 mm

    Pin_count

    38

    Operating_temp

    -40 to 125 °C

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Gold

    Htsn

    8542390001

    Country_of_origin

    United States

    Number_of_analog_inputs

    16

    Msl_level

    2

    Бренд

    Input_volt

    2.5, 5 V

    Input_signal_type

    Single-Ended

    Input_type

    Voltage

    Signal_to_noise_ratio

    60 dB

    Differential_nonlinearity

    0.5 LSB

    Typical_power_dissipation

    14.5 mW

    Resolution

    10 Bit

    Architecture

    SAR

    Digital_supply_support

    No

    Volt_reference

    External

    Sampling_rate

    1 Msps

    Digital_interface_type

    Serial (SPI)