Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

ADC Single Pipelined 40Msps 12-bit Parallel 40-Pin TQFN EP, MAX1206ETL+, Maxim Integrated

The MAX1206 is a 3.3V, 12-bit analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input, driving the internal quantizer. The MAX1206 is optimized for low power, small size, and high dynamic performance. This ADC operates from a single 3.0V to 3.6V supply, consuming only 159mW, while delivering a typical signal-to-noise ratio (SNR) performance of 68.6dB at a 20MHz input frequency. The T/H-driven input stage accepts single-ended or differential inputs. In addition to low operating power, the MAX1206 features a 0.15mW power-down mode to conserve power during idle periods. A flexible reference structure allows the MAX1206 to use its internal precision bandgap reference or accept an externally applied reference. A common-mode reference is provided to simplify design and reduce external component count in differential analog input circuits. The MAX1206 supports both a single-ended and differential input clock drive. Wide variations in the clock duty cycle are compensated with the ADC"s internal duty-cycle equalizer. The MAX1206 features parallel, CMOS-compatible outputs. The digital output format is pin selectable to be either two"s complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate power input for the digital outputs accepts a voltage from 1.7V to 3.6V for flexible interfacing with various logic levels. The MAX1206 is available in a 6mm x 6mm x 0.8mm, 40- pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range. Refer to the MAX1209 and MAX1211 (see Pin-Compatible Higher/Speed Versions table) for applications that require high dynamic performance for IF input frequencies. See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.

  • Excellent Dynamic Performance
    • 68.6dB SNR at fIN = 20MHz
    • 90dBc SFDR at fIN = 20MHz
  • Low-Power Operation
    • 159mW at 3.0V (Single-Ended Clock)
    • 181mW at 3.3V (Single-Ended Clock)
    • 198mW at 3.3V (Differential Clock)
  • Differential or Single-Ended Clock
  • Accepts 20% to 80% Clock Duty Cycle
  • Fully Differential or Single-Ended Analog Input
  • Adjustable Full-Scale Analog Input Range
  • Common-Mode Reference
  • Power-Down Mode
  • CMOS-Compatible Outputs in Two"s Complement or Gray Code
  • Data-Valid Indicator Simplifies Digital Design
  • Out-of-Range and Data-Valid Indicators
  • Miniature, 40-Pin Thin QFN Package with Exposed Paddle
  • Pin-Compatible, IF Sampling ADC Available (MAX1211ETL)
  • Evaluation Kit Available (Order MAX1211EVKIT)

    • Характеристики

    Volt_supply_source

    Single
    Number_of_analog_inputs

    1
    Sampling_rate

    40 Msps
    Volt_reference

    External, Internal
    Digital_supply_support

    No
    Architecture

    Pipelined
    Resolution

    12 Bit
    Typical_power_dissipation

    198 mW
    Differential_nonlinearity

    0.7 LSB
    Signal_to_noise_ratio

    68.6 dB
    Input_type

    Voltage
    Input_signal_type

    Differential, Single-Ended
    Input_volt

    ±1.024 V
    Бренд

    Msl_level

    1
    Eccn

    EAR99
    Htsn

    8542390001
    Lead_finish

    Matte Tin
    Mounting

    Surface Mount
    Operating_temp

    -40 to 85 °C
    Pin_count

    40
    Product_dimensions

    6 x 6 x 0.73 mm
    Schedule_b

    8542390000
    Screening_level

    Extended Industrial
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS04008/MAXMS04008-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Number_of_adc_channels

    1
    Polarity_of_input_volt

    Bipolar
    Operating_supply_volt

    3, 3.3 V, 3.6
    Number_of_adcs

    1
    Digital_interface_type

    Parallel
    Артикул: MAX1206ETL+

    Описание

    The MAX1206 is a 3.3V, 12-bit analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input, driving the internal quantizer. The MAX1206 is optimized for low power, small size, and high dynamic performance. This ADC operates from a single 3.0V to 3.6V supply, consuming only 159mW, while delivering a typical signal-to-noise ratio (SNR) performance of 68.6dB at a 20MHz input frequency. The T/H-driven input stage accepts single-ended or differential inputs. In addition to low operating power, the MAX1206 features a 0.15mW power-down mode to conserve power during idle periods. A flexible reference structure allows the MAX1206 to use its internal precision bandgap reference or accept an externally applied reference. A common-mode reference is provided to simplify design and reduce external component count in differential analog input circuits. The MAX1206 supports both a single-ended and differential input clock drive. Wide variations in the clock duty cycle are compensated with the ADC"s internal duty-cycle equalizer. The MAX1206 features parallel, CMOS-compatible outputs. The digital output format is pin selectable to be either two"s complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate power input for the digital outputs accepts a voltage from 1.7V to 3.6V for flexible interfacing with various logic levels. The MAX1206 is available in a 6mm x 6mm x 0.8mm, 40- pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range. Refer to the MAX1209 and MAX1211 (see Pin-Compatible Higher/Speed Versions table) for applications that require high dynamic performance for IF input frequencies. See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.

    • Excellent Dynamic Performance
      • 68.6dB SNR at fIN = 20MHz
      • 90dBc SFDR at fIN = 20MHz
  • Low-Power Operation
    • 159mW at 3.0V (Single-Ended Clock)
    • 181mW at 3.3V (Single-Ended Clock)
    • 198mW at 3.3V (Differential Clock)
  • Differential or Single-Ended Clock
  • Accepts 20% to 80% Clock Duty Cycle
  • Fully Differential or Single-Ended Analog Input
  • Adjustable Full-Scale Analog Input Range
  • Common-Mode Reference
  • Power-Down Mode
  • CMOS-Compatible Outputs in Two"s Complement or Gray Code
  • Data-Valid Indicator Simplifies Digital Design
  • Out-of-Range and Data-Valid Indicators
  • Miniature, 40-Pin Thin QFN Package with Exposed Paddle
  • Pin-Compatible, IF Sampling ADC Available (MAX1211ETL)
  • Evaluation Kit Available (Order MAX1211EVKIT)

    • Детали

    Volt_supply_source

    Single
    Number_of_analog_inputs

    1
    Sampling_rate

    40 Msps
    Volt_reference

    External, Internal
    Digital_supply_support

    No
    Architecture

    Pipelined
    Resolution

    12 Bit
    Typical_power_dissipation

    198 mW
    Differential_nonlinearity

    0.7 LSB
    Signal_to_noise_ratio

    68.6 dB
    Input_type

    Voltage
    Input_signal_type

    Differential, Single-Ended
    Input_volt

    ±1.024 V
    Бренд

    Msl_level

    1
    Eccn

    EAR99
    Htsn

    8542390001
    Lead_finish

    Matte Tin
    Mounting

    Surface Mount
    Operating_temp

    -40 to 85 °C
    Pin_count

    40
    Product_dimensions

    6 x 6 x 0.73 mm
    Schedule_b

    8542390000
    Screening_level

    Extended Industrial
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS04008/MAXMS04008-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Number_of_adc_channels

    1
    Polarity_of_input_volt

    Bipolar
    Operating_supply_volt

    3, 3.3 V, 3.6
    Number_of_adcs

    1
    Digital_interface_type

    Parallel

    Похожие товары