ADC Single Folding/Interpolating 1Gsps 8-bit Parallel/LVDS 128-Pin LQFP EP Tray, ADC081000CIYB/NOPB, Texas Instruments

The ADC081000 is a low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 1.6 GSPS. Consuming a typical 1.4 Watts at 1 GSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 500 MHz input signal and a 1 GHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS digital outputs are compliant with IEEE 1596.3-1996, with the exception of a reduced common mode voltage of 0.8V.The converter has a 1:2 demultiplexer that feeds two LVDS buses, reducing the output data rate on each bus to half the sampling rate. The data on these buses are interleaved in time to provide a 500 MHz output rate per bus and a combined output rate of 1 GSPS.The converter typically consumes less than 10 mW in the Power Down Mode and is available in a 128-lead HLQFP and operates over the industrial (–40°C = TA = +85°C) temperature range. 

  • Internal Sample-and-Hold
  • Single +1.9V ±0.1V Operation
  • Adjustable Output Levels
  • Ensured No Missing Codes
  • Low Power Standby Mode
  • Характеристики

    Volt_supply_source

    Single

    Number_of_analog_inputs

    1

    Sampling_rate

    1 Gsps

    Volt_reference

    Internal

    Digital_supply_support

    No

    Architecture

    Folding, Interpolating

    Resolution

    8 Bit

    Differential_nonlinearity

    0.7 LSB

    Signal_to_noise_ratio

    48 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    0.6, 0.8 Vp-p

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    3A991.C.1

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    2000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    128

    Product_dimensions

    20 x 20 x 1.4 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC081000&&fileType=pdf

    Supplier_package

    LQFP EP

    Operating_supply_volt

    1.8, 1.9 V, 2

    Number_of_adcs

    1

    Digital_interface_type

    LVDS, Parallel

    SKU: ADC081000CIYB/NOPB

    Description

    The ADC081000 is a low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 1.6 GSPS. Consuming a typical 1.4 Watts at 1 GSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 500 MHz input signal and a 1 GHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS digital outputs are compliant with IEEE 1596.3-1996, with the exception of a reduced common mode voltage of 0.8V.The converter has a 1:2 demultiplexer that feeds two LVDS buses, reducing the output data rate on each bus to half the sampling rate. The data on these buses are interleaved in time to provide a 500 MHz output rate per bus and a combined output rate of 1 GSPS.The converter typically consumes less than 10 mW in the Power Down Mode and is available in a 128-lead HLQFP and operates over the industrial (–40°C = TA = +85°C) temperature range. 

  • Internal Sample-and-Hold
  • Single +1.9V ±0.1V Operation
  • Adjustable Output Levels
  • Ensured No Missing Codes
  • Low Power Standby Mode
  • Additional information

    Volt_supply_source

    Single

    Number_of_analog_inputs

    1

    Sampling_rate

    1 Gsps

    Volt_reference

    Internal

    Digital_supply_support

    No

    Architecture

    Folding, Interpolating

    Resolution

    8 Bit

    Differential_nonlinearity

    0.7 LSB

    Signal_to_noise_ratio

    48 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    0.6, 0.8 Vp-p

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    3A991.C.1

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    2000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    128

    Product_dimensions

    20 x 20 x 1.4 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC081000&&fileType=pdf

    Supplier_package

    LQFP EP

    Operating_supply_volt

    1.8, 1.9 V, 2

    Number_of_adcs

    1

    Digital_interface_type

    LVDS, Parallel