ADC Single Delta-Sigma 616sps 20-bit Serial 20-Pin SSOP, CS5526-BS, Cirrus Logic

The 16-bit CS5525 and the 20-bit CS5526 are highly integrated ?S A/D converters which include an instrumentation amplifier, a PGA (programmable gain amplifier), eight digital filters, and self and system calibration circuitry. The converters are designed to provide their own negative supply which enables their on-chip instrumentation amplifiers to measure bipolar ground-referenced signals =±100 mV. By directly supplying NBV with -2.5 V and with VA+ at 5 V, ±2.5 V signals (with respect to ground) can be measured. The digital filters provide programmable output update rates between 3.76 Sps to 202 Sps (XIN = 32.768 kHz). Output word rates can be increased by approximately 3X by using XIN = 100 kHz. Each filter is designed to settle to full accuracy for its output update rate in one conversion cycle. The filters with word rates of 15 Sps or less (XIN = 32.768 kHz) reject both 50 and 60 Hz (±3 Hz) line interference simultaneously. Low power, single conversion settling time, programmable output rates, and the ability to handle negative input signals make these single supply products ideal solutions for isolated and non-isolated applications.

  • Delta-sigma A/D Converter
    • Linearity Error: 0.0015%FS
    • Noise-free Resolution: 18-bits
  • Bipolar/Unipolar Input Ranges
    • 25 mV, 55 mV, 100 mV, 1 V, 2.5 V and 5 V
  • Chopper Stabilized Instrumentation Amplifier
  • On-chip Charge Pump Drive Circuitry
  • 4-bit Output Latch
  • Simple three-wire serial interface
    • SPI™ and Microwire™ Compatible
    • Schmitt Trigger on Serial Clock (SCLK)
  • Programmable Output Word Rates
    • 3.76 Sps to 202 Sps (XIN = 32.768 kHz)
    • 11.47 Sps to 616 Sps (XIN = 100 kHz)
  • Output Settles in One Conversion Cycle
  • Simultaneous 50/60 Hz Noise Rejection
  • System and Self-calibration with Read/Write Registers
  • Single +5 V Analog Supply +3.0 V or +5 V Digital Supply
  • Low-power Mode Consumption: 4.9 mW
    • 1.8 mW in 1 V, 2.5 V, and 5 V Input Ranges

Характеристики

Volt_supply_source

Analog and Digital

Lead_finish

Tin/Lead

Sampling_rate

616 sps

Volt_reference

External

Digital_supply_support

Yes

Architecture

Delta-Sigma

Resolution

20 Bit

Input_type

Voltage

Input_signal_type

Differential

Input_volt

±0.025, ±0.055, ±0.1, ±1, ±2.5, ±5 V, 0.025, 0.055, 0.1, 1, 2.5, 5

Бренд

Eccn

EAR99

Htsn

8542390001

Number_of_analog_inputs

1

Max_processing_temp

240

Max_power_dissipation

500 mW

Mounting

Surface Mount

Operating_temp

-40 to 85 °C

Pin_count

20

Product_dimensions

7.5 x 5.3 x 1.75 mm

Schedule_b

8542390000

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CIRR/CIRRS00692/CIRRS00692-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

SSOP

Number_of_adc_channels

1

Polarity_of_input_volt

Bipolar, Unipolar

Operating_supply_volt

4.75, 5 V, 5.25

Number_of_adcs

1

Digital_interface_type

Serial (3-Wire, SPI, Microwire)

Артикул: CS5526-BS

Описание

The 16-bit CS5525 and the 20-bit CS5526 are highly integrated ?S A/D converters which include an instrumentation amplifier, a PGA (programmable gain amplifier), eight digital filters, and self and system calibration circuitry. The converters are designed to provide their own negative supply which enables their on-chip instrumentation amplifiers to measure bipolar ground-referenced signals =±100 mV. By directly supplying NBV with -2.5 V and with VA+ at 5 V, ±2.5 V signals (with respect to ground) can be measured. The digital filters provide programmable output update rates between 3.76 Sps to 202 Sps (XIN = 32.768 kHz). Output word rates can be increased by approximately 3X by using XIN = 100 kHz. Each filter is designed to settle to full accuracy for its output update rate in one conversion cycle. The filters with word rates of 15 Sps or less (XIN = 32.768 kHz) reject both 50 and 60 Hz (±3 Hz) line interference simultaneously. Low power, single conversion settling time, programmable output rates, and the ability to handle negative input signals make these single supply products ideal solutions for isolated and non-isolated applications.

  • Delta-sigma A/D Converter
    • Linearity Error: 0.0015%FS
    • Noise-free Resolution: 18-bits
  • Bipolar/Unipolar Input Ranges
    • 25 mV, 55 mV, 100 mV, 1 V, 2.5 V and 5 V
  • Chopper Stabilized Instrumentation Amplifier
  • On-chip Charge Pump Drive Circuitry
  • 4-bit Output Latch
  • Simple three-wire serial interface
    • SPI™ and Microwire™ Compatible
    • Schmitt Trigger on Serial Clock (SCLK)
  • Programmable Output Word Rates
    • 3.76 Sps to 202 Sps (XIN = 32.768 kHz)
    • 11.47 Sps to 616 Sps (XIN = 100 kHz)
  • Output Settles in One Conversion Cycle
  • Simultaneous 50/60 Hz Noise Rejection
  • System and Self-calibration with Read/Write Registers
  • Single +5 V Analog Supply +3.0 V or +5 V Digital Supply
  • Low-power Mode Consumption: 4.9 mW
    • 1.8 mW in 1 V, 2.5 V, and 5 V Input Ranges

Детали

Volt_supply_source

Analog and Digital

Lead_finish

Tin/Lead

Sampling_rate

616 sps

Volt_reference

External

Digital_supply_support

Yes

Architecture

Delta-Sigma

Resolution

20 Bit

Input_type

Voltage

Input_signal_type

Differential

Input_volt

±0.025, ±0.055, ±0.1, ±1, ±2.5, ±5 V, 0.025, 0.055, 0.1, 1, 2.5, 5

Бренд

Eccn

EAR99

Htsn

8542390001

Number_of_analog_inputs

1

Max_processing_temp

240

Max_power_dissipation

500 mW

Mounting

Surface Mount

Operating_temp

-40 to 85 °C

Pin_count

20

Product_dimensions

7.5 x 5.3 x 1.75 mm

Schedule_b

8542390000

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CIRR/CIRRS00692/CIRRS00692-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

SSOP

Number_of_adc_channels

1

Polarity_of_input_volt

Bipolar, Unipolar

Operating_supply_volt

4.75, 5 V, 5.25

Number_of_adcs

1

Digital_interface_type

Serial (3-Wire, SPI, Microwire)