ADC Single Delta-Sigma 5Msps 16-bit Parallel 64-Pin HTQFP EP T/R, ADS1606IPAPT, Texas Instruments

The ADS1605 and ADS1606 are high-speed, high-precision, delta-sigma analog-to-digital converter (ADCs) with 16-bit resolution. The data rate is 5 mega-samples per second (MSPS), the bandwidth (–3dB) is 2.45MHz, and passband ripple is less than ±0.0025dB (to 2.2MHz). Both devices offer outstanding performance at these speeds with a signal-to-noise ratio up to 88dB, total harmonic distortion down to –99dB, and a spurious-free dynamic range up to 101dB. For even higher-speed operation, the data rate an be doubled to 10MSPS in 2X mode. The ADS1606 includes an adjustable first-in first-out buffer (FIFO) for the output data. The input signal is measured against a voltage reference that can be generated on-chip or supplied externally. The digital output data is provided over a simple parallel interface that easily connects to digital signal processors (DSPs). An out-of-range monitor reports when the input range has been exceeded. The ADS1605/6 operate from a +5V analog supply (AVDD) and +3V digital supply (DVDD). The digital I/O supply (IOVDD) operates from +2.7 to +5.25V, enabling the digital interface to support a range of logic families. The analog power dissipation is set by an external resistor and can be reduced when operating at slower speeds. A power down mode, activated by a digital I/O pin, shuts down all circuitry. The ADS1605/6 are offered in a TQFP-64 package using TI PowerPAD technology. The ADS1605 and ADS1606, along with their 18-bit counterparts, the ADS1625 and ADS1626, are well suited for the demanding measurement requirements of scientific instrumentation, automated test equipment, data acquisition, and medical imaging.

  • Data Rate: 5MSPS (10MSPS in 2X Mode)
  • Signal-to-Noise Ratio: 88dB
  • Total Harmonic Distortion: –99dB
  • Spurious-Free Dynamic Range: 101dB
  • Linear Phase with 2.45MHz Bandwidth
  • Passband Ripple: ±0.0025dB
  • Selectable On-Chip Reference
  • Directly Connects to TMS320C6000 DSPs
  • Easily Upgradeable to 18 Bits with the ADS1625 and ADS1626
  • Adjustable Power Dissipation: 315 to 570mW
  • Power Down Mode
  • Supplies:
    • Analog+5V
    • Digital +3V
    • Digital I/O+2.7 to +5.25V
  • APPLICATIONS
    • Scientific Instruments
    • Automated Test Equipment
    • Data Acquisition
    • Medical Imaging
    • Vibration Analysis
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    1

    Sampling_rate

    5 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    570 mW

    Differential_nonlinearity

    0.25 LSB

    Signal_to_noise_ratio

    88 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    ±0.441 V, ±2.205, ±3.495, ±4.401

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    3A991.C.4

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    710 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1605&&fileType=pdf

    Supplier_package

    HTQFP EP

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    1

    Digital_interface_type

    Parallel

    Артикул: ADS1606IPAPT

    Описание

    The ADS1605 and ADS1606 are high-speed, high-precision, delta-sigma analog-to-digital converter (ADCs) with 16-bit resolution. The data rate is 5 mega-samples per second (MSPS), the bandwidth (–3dB) is 2.45MHz, and passband ripple is less than ±0.0025dB (to 2.2MHz). Both devices offer outstanding performance at these speeds with a signal-to-noise ratio up to 88dB, total harmonic distortion down to –99dB, and a spurious-free dynamic range up to 101dB. For even higher-speed operation, the data rate an be doubled to 10MSPS in 2X mode. The ADS1606 includes an adjustable first-in first-out buffer (FIFO) for the output data. The input signal is measured against a voltage reference that can be generated on-chip or supplied externally. The digital output data is provided over a simple parallel interface that easily connects to digital signal processors (DSPs). An out-of-range monitor reports when the input range has been exceeded. The ADS1605/6 operate from a +5V analog supply (AVDD) and +3V digital supply (DVDD). The digital I/O supply (IOVDD) operates from +2.7 to +5.25V, enabling the digital interface to support a range of logic families. The analog power dissipation is set by an external resistor and can be reduced when operating at slower speeds. A power down mode, activated by a digital I/O pin, shuts down all circuitry. The ADS1605/6 are offered in a TQFP-64 package using TI PowerPAD technology. The ADS1605 and ADS1606, along with their 18-bit counterparts, the ADS1625 and ADS1626, are well suited for the demanding measurement requirements of scientific instrumentation, automated test equipment, data acquisition, and medical imaging.

  • Data Rate: 5MSPS (10MSPS in 2X Mode)
  • Signal-to-Noise Ratio: 88dB
  • Total Harmonic Distortion: –99dB
  • Spurious-Free Dynamic Range: 101dB
  • Linear Phase with 2.45MHz Bandwidth
  • Passband Ripple: ±0.0025dB
  • Selectable On-Chip Reference
  • Directly Connects to TMS320C6000 DSPs
  • Easily Upgradeable to 18 Bits with the ADS1625 and ADS1626
  • Adjustable Power Dissipation: 315 to 570mW
  • Power Down Mode
  • Supplies:
    • Analog+5V
    • Digital +3V
    • Digital I/O+2.7 to +5.25V
  • APPLICATIONS
    • Scientific Instruments
    • Automated Test Equipment
    • Data Acquisition
    • Medical Imaging
    • Vibration Analysis
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    1

    Sampling_rate

    5 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    570 mW

    Differential_nonlinearity

    0.25 LSB

    Signal_to_noise_ratio

    88 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    ±0.441 V, ±2.205, ±3.495, ±4.401

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    3A991.C.4

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    710 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1605&&fileType=pdf

    Supplier_package

    HTQFP EP

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    1

    Digital_interface_type

    Parallel