ADC Octal Delta-Sigma 52ksps 16-bit Serial 64-Pin HTQFP EP T/R, ADS1178IPAPR, Texas Instruments

The ADS1174 (quad) and ADS1178 (octal) are multiple delta-sigma (?S) analog-to-digital converters (ADCs) with data rates up to 52k samples-per-second (SPS), which allow synchronous sampling of four and eight channels. These devices use identical packages, and are also compatible with the high-performance 24-bit ADS1274 and ADS1278, permitting drop-in upgrades.The delta-sigma architecture offers near ideal 16-bit ac performance (97dB SNR, -105dB THD, 1LSB linearity) combined with 0.005dB passband ripple and linear phase response.The high-order, chopper-stabilized modulator achieves very low drift (2µV/°C offset, 2ppm/°C gain) and low noise (1LSBPP). The on-chip finite impulse response (FIR) filter provides a usable signal bandwidth up to 90% of the Nyquist rate with 100dB of stop band attenuation while suppressing modulator and signal out-of-band noise.Two operating modes allow for optimization of speed and power: High-speed mode (31mW/Ch at 52kSPS), andLow-power mode (7mW/Ch at 10kSPS).A SYNC input control pin allows the device conversions to be started and synchronized to an external event. SPI and Frame-Sync serial interfaces are supported. The device is fully specified over the extended industrial range (40°C to +105°C) and is available in an HTQFP-64 PowerPAD package.

  • Simultaneously Sample Four/Eight Channels
  • Selectable Operating Modes:
    High-Speed: 52kSPS Data Rate, 31mW/ch
    Low-Power: 10kSPS Data Rate, 7mW/ch
  • AC Performance:
    25kHz Bandwidth
    97dB SNR
    -105dB THD
  • DC Performance:
    2µV/°C Offset Drift
    2ppm/°C Gain Drift
  • Digital Filter:
    Linear Phase Response
    Passband Ripple: ±0.005dB
    Stop Band Attenuation: 100dB
  • Selectable SPI or Frame Sync Serial Interface
  • Simple Pin-Driven Control
  • Low Sampling Aperture Error
  • Specified from -40°C to +105°C
  • Analog Supply: 5V
  • I/O Supply: 1.8V to 3.3V
  • Digital Core Supply: 1.8V
  • APPLICATIONS
    • 3-Phase Power Monitors
    • Defibrillators and ECG Monitors
    • Coriolis Flow Meters
    • Vibration/Modal Analysis
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8

    Sampling_rate

    52 ksps

    Volt_reference

    External

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    245 mW

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    97 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±2.5 V

    Бренд

    Msl_level

    3

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    355 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 105 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1178&&fileType=pdf

    Supplier_package

    HTQFP EP

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    8

    Digital_interface_type

    Serial (SPI)

    Артикул: ADS1178IPAPR

    Описание

    The ADS1174 (quad) and ADS1178 (octal) are multiple delta-sigma (?S) analog-to-digital converters (ADCs) with data rates up to 52k samples-per-second (SPS), which allow synchronous sampling of four and eight channels. These devices use identical packages, and are also compatible with the high-performance 24-bit ADS1274 and ADS1278, permitting drop-in upgrades.The delta-sigma architecture offers near ideal 16-bit ac performance (97dB SNR, -105dB THD, 1LSB linearity) combined with 0.005dB passband ripple and linear phase response.The high-order, chopper-stabilized modulator achieves very low drift (2µV/°C offset, 2ppm/°C gain) and low noise (1LSBPP). The on-chip finite impulse response (FIR) filter provides a usable signal bandwidth up to 90% of the Nyquist rate with 100dB of stop band attenuation while suppressing modulator and signal out-of-band noise.Two operating modes allow for optimization of speed and power: High-speed mode (31mW/Ch at 52kSPS), andLow-power mode (7mW/Ch at 10kSPS).A SYNC input control pin allows the device conversions to be started and synchronized to an external event. SPI and Frame-Sync serial interfaces are supported. The device is fully specified over the extended industrial range (40°C to +105°C) and is available in an HTQFP-64 PowerPAD package.

  • Simultaneously Sample Four/Eight Channels
  • Selectable Operating Modes:
    High-Speed: 52kSPS Data Rate, 31mW/ch
    Low-Power: 10kSPS Data Rate, 7mW/ch
  • AC Performance:
    25kHz Bandwidth
    97dB SNR
    -105dB THD
  • DC Performance:
    2µV/°C Offset Drift
    2ppm/°C Gain Drift
  • Digital Filter:
    Linear Phase Response
    Passband Ripple: ±0.005dB
    Stop Band Attenuation: 100dB
  • Selectable SPI or Frame Sync Serial Interface
  • Simple Pin-Driven Control
  • Low Sampling Aperture Error
  • Specified from -40°C to +105°C
  • Analog Supply: 5V
  • I/O Supply: 1.8V to 3.3V
  • Digital Core Supply: 1.8V
  • APPLICATIONS
    • 3-Phase Power Monitors
    • Defibrillators and ECG Monitors
    • Coriolis Flow Meters
    • Vibration/Modal Analysis
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8

    Sampling_rate

    52 ksps

    Volt_reference

    External

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    245 mW

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    97 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±2.5 V

    Бренд

    Msl_level

    3

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    355 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 105 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1178&&fileType=pdf

    Supplier_package

    HTQFP EP

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    8

    Digital_interface_type

    Serial (SPI)