ADC Dual Pipelined 65Msps 12-bit Parallel 64-Pin TQFP Tray, ADC12DL065CIVS/NOPB, Texas Instruments

The ADC12DL065 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 65 Megasamples per second (MSPS). This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption while providing excellent dynamic performance and a 250 MHz Full Power Bandwidth. Operating on a single +3.3V power supply, the ADC12DL065 achieves 11.0 effective bits at nyquist and consumes just 360 mW at 65 MSPS, including the reference current. The Power Down feature reduces power consumption to 36 mW.The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. The digital outputs from the two ADC"s are available on a single multiplexed 12-bit bus or on separate buses. Duty cycle stabilization and output data format are selectable using a quad state function pin. The output data can be set for offset binary or two"s complement.To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL065 can be connected to a separate supply voltage in the range of 2.4V to the analog supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of -40°C to +85°C. An evaluation board is available to ease the evaluation process. 

  • Single +3.3V Supply operation
  • Internal Sample-and-Hold
  • Internal Reference
  • Outputs 2.4V to 3.6V Compatible
  • Power Down Mode
  • Duty Cycle Stabilizer
  • Multiplexed Output Mode
  • Resolution: 12 Bits
  • DNL: ±0.4 LSB (typ)
  • SNR (fIN = 10 MHz): 69 dB (typ)
  • SFDR (fIN = 10 MHz): 86 dB (typ)
  • Data Latency: 7 Clock Cycles
  • Power Consumption
    • Operating: 360 mW (typ)
    • Power Down Mode: 36 mW (typ)
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    65 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    12 Bit

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    69 dBc

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    2 V

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC12DL065&&fileType=pdf

    Supplier_package

    TQFP

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel

    Артикул: ADC12DL065CIVS/NOPB

    Описание

    The ADC12DL065 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 65 Megasamples per second (MSPS). This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption while providing excellent dynamic performance and a 250 MHz Full Power Bandwidth. Operating on a single +3.3V power supply, the ADC12DL065 achieves 11.0 effective bits at nyquist and consumes just 360 mW at 65 MSPS, including the reference current. The Power Down feature reduces power consumption to 36 mW.The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. The digital outputs from the two ADC"s are available on a single multiplexed 12-bit bus or on separate buses. Duty cycle stabilization and output data format are selectable using a quad state function pin. The output data can be set for offset binary or two"s complement.To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL065 can be connected to a separate supply voltage in the range of 2.4V to the analog supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of -40°C to +85°C. An evaluation board is available to ease the evaluation process. 

  • Single +3.3V Supply operation
  • Internal Sample-and-Hold
  • Internal Reference
  • Outputs 2.4V to 3.6V Compatible
  • Power Down Mode
  • Duty Cycle Stabilizer
  • Multiplexed Output Mode
  • Resolution: 12 Bits
  • DNL: ±0.4 LSB (typ)
  • SNR (fIN = 10 MHz): 69 dB (typ)
  • SFDR (fIN = 10 MHz): 86 dB (typ)
  • Data Latency: 7 Clock Cycles
  • Power Consumption
    • Operating: 360 mW (typ)
    • Power Down Mode: 36 mW (typ)
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    65 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    12 Bit

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    69 dBc

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    2 V

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC12DL065&&fileType=pdf

    Supplier_package

    TQFP

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel