ADC Dual Pipelined 40Msps 8-bit Parallel 48-Pin TQFP Tray, THS0842IPFB, Texas Instruments

The THS0842 is a dual 8-bit 40 MSPS high-speed A/D converter. It alternately converts each analog input signal into 8-bit binary-coded digital words up to a maximum sampling rate of 40 MSPS with an 80 MHz clock. All digital inputs and outputs are 3.3 V TTL/CMOS-compatible. Thanks to an innovative single-pipeline architecture implemented in a CMOS process and the 3.3 V supply, the device consumes very little power. In order to provide maximum flexibility, both bottom and top voltage references can be set from user supplied voltages. Alternately, if no external references are available, on-chip references can be used which are also made available externally. The full-scale range is 1 Vpp, depending on the analog supply voltage. If external references are available, the internal references can be powered down independently from the rest of the chip, resulting in an even greater power saving. The device is specifically suited for the baseband sampling of wireless local loop (WLL) communication, cable modems, set top boxes (STBs), and test instruments.

  • Dual Simultaneous Sample and Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • 8-Bit Resolution 40 MSPS Sampling Analog-to-Digital Converter (ADC)
  • Single or Dual Parallel Bus Output
  • Low Power Consumption: 275 mW Typ Using External References
  • Wide Analog Input Bandwidth: 600 MHz Typ
  • 3.3 V Single-Supply Operation
  • 3.3 V TTL/CMOS-Compatible Digital I/O
  • Internal or External Bottom and Top Reference Voltages
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • 48-Pin Thin Quad Flat Pack (TQFP) Package
  • Applications
    • Digital Communications (Baseband Sampling)
    • Cable Modems
    • Set Top Boxes
    • Test Instruments
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    40 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    8 Bit

    Typical_power_dissipation

    320 mW

    Differential_nonlinearity

    -1, 2 LSB

    Signal_to_noise_ratio

    42.7 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±0.65 V

    Бренд

    Msl_level

    2

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    48

    Product_dimensions

    7 x 7 x 1 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=THS0842&&fileType=pdf

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel

    Артикул: THS0842IPFB

    Описание

    The THS0842 is a dual 8-bit 40 MSPS high-speed A/D converter. It alternately converts each analog input signal into 8-bit binary-coded digital words up to a maximum sampling rate of 40 MSPS with an 80 MHz clock. All digital inputs and outputs are 3.3 V TTL/CMOS-compatible. Thanks to an innovative single-pipeline architecture implemented in a CMOS process and the 3.3 V supply, the device consumes very little power. In order to provide maximum flexibility, both bottom and top voltage references can be set from user supplied voltages. Alternately, if no external references are available, on-chip references can be used which are also made available externally. The full-scale range is 1 Vpp, depending on the analog supply voltage. If external references are available, the internal references can be powered down independently from the rest of the chip, resulting in an even greater power saving. The device is specifically suited for the baseband sampling of wireless local loop (WLL) communication, cable modems, set top boxes (STBs), and test instruments.

  • Dual Simultaneous Sample and Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • 8-Bit Resolution 40 MSPS Sampling Analog-to-Digital Converter (ADC)
  • Single or Dual Parallel Bus Output
  • Low Power Consumption: 275 mW Typ Using External References
  • Wide Analog Input Bandwidth: 600 MHz Typ
  • 3.3 V Single-Supply Operation
  • 3.3 V TTL/CMOS-Compatible Digital I/O
  • Internal or External Bottom and Top Reference Voltages
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • 48-Pin Thin Quad Flat Pack (TQFP) Package
  • Applications
    • Digital Communications (Baseband Sampling)
    • Cable Modems
    • Set Top Boxes
    • Test Instruments
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    40 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    8 Bit

    Typical_power_dissipation

    320 mW

    Differential_nonlinearity

    -1, 2 LSB

    Signal_to_noise_ratio

    42.7 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±0.65 V

    Бренд

    Msl_level

    2

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    48

    Product_dimensions

    7 x 7 x 1 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=THS0842&&fileType=pdf

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel