Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

ADC Dual Pipelined 120Msps 10-bit Parallel 48-Pin TQFP EP, MAX1190ECM+D, Maxim Integrated

The MAX1190 is a 3.3V, dual 10-bit analog-to-digital converter (ADC) featuring fully differential wideband track-and-hold (T/H) inputs, driving two ADCs. The MAX1190 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 3.1V to 3.6V supply, consuming only 492mW while delivering a typical signal-to-noise and distortion (SINAD) of 57dB at an input frequency of 60MHz and a sampling rate of 120Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters can also be operated with single-ended inputs. In addition to low operating power, the MAX1190 features a 3mA sleep mode, as well as a 1µA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied reference, if desired, for applications requiring increased accuracy or a different input voltage range. The MAX1190 features parallel, CMOS-compatible three-state outputs. The digital output format can be set to two"s complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing with various logic families. The MAX1190 is available in a 7mm x 7mm, 48-pin TQFP-EP package, and is specified for the extended industrial (-40°C to +85°C) temperature range. Pin-compatible lower speed versions of the MAX1190 are also available. Refer to the MAX1180MAX1184 data sheets for 105Msps/80Msps/65Msps/40Msps. In addition to these speed grades, this family includes two multiplexed output versions (MAX1185/MAX1186 for 20Msps/40Msps), for which digital data is presented time-interleaved and on a single, parallel 10-bit output port. For lower speed, pin-compatible, 8-bit versions of the MAX1190, refer to the MAX1195MAX1198 data sheets.

  • Single 3.3V Operation
  • Excellent Dynamic Performance
    • 57dB SINAD at fIN = 60MHz
    • 64dBc SFDR at fIN = 60MHz
  • -71dBc Interchannel Crosstalk at fIN = 60MHz
  • Low Power
    • 492mW (Normal Operation)
    • 10mW (Sleep Mode)
    • 3.3µW (Shutdown Mode)
  • 0.08dB Gain and 0.8° Phase Matching
  • Wide ±1VP-P Differential Analog Input VoltageRange
  • 400MHz -3dB Input Bandwidth
  • On-Chip 2.048V Precision Bandgap Reference
  • User-Selectable Output FormatTwo"s Complementor Offset Binary
  • Pin-Compatible, Lower-Speed, 10-Bit and 8-BitVersions Available

    • Характеристики

    Volt_supply_source

    Single
    Differential_nonlinearity

    -1, 1.5 LSB
    Sampling_rate

    120 Msps
    Volt_reference

    External, Internal
    Digital_supply_support

    No
    Architecture

    Pipelined
    Resolution

    10 Bit
    Typical_power_dissipation

    492 mW
    Eccn

    EAR99
    Signal_to_noise_ratio

    58.5 dB
    Input_type

    Voltage
    Input_signal_type

    Differential, Single-Ended
    Input_volt

    ±1 V
    Бренд

    Msl_level

    3
    Country_of_origin

    Taiwan
    Number_of_analog_inputs

    2
    Lead_finish

    Matte Tin
    Screening_level

    Extended Industrial
    Max_power_dissipation

    611 mW
    Max_processing_temp

    260, 300
    Mounting

    Surface Mount
    Operating_temp

    -40 to 85 °C
    Pin_count

    48
    Product_dimensions

    7 x 7 x 1 mm
    Schedule_b

    8542390000
    Htsn

    8542390001
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS07922/MAXMS07922-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    TQFP EP
    Number_of_adc_channels

    2
    Polarity_of_input_volt

    Bipolar
    Operating_supply_volt

    3.1, 3.3 V, 3.6
    Number_of_adcs

    2
    Digital_interface_type

    Parallel
    Артикул: MAX1190ECM+D

    Описание

    The MAX1190 is a 3.3V, dual 10-bit analog-to-digital converter (ADC) featuring fully differential wideband track-and-hold (T/H) inputs, driving two ADCs. The MAX1190 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 3.1V to 3.6V supply, consuming only 492mW while delivering a typical signal-to-noise and distortion (SINAD) of 57dB at an input frequency of 60MHz and a sampling rate of 120Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters can also be operated with single-ended inputs. In addition to low operating power, the MAX1190 features a 3mA sleep mode, as well as a 1µA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied reference, if desired, for applications requiring increased accuracy or a different input voltage range. The MAX1190 features parallel, CMOS-compatible three-state outputs. The digital output format can be set to two"s complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing with various logic families. The MAX1190 is available in a 7mm x 7mm, 48-pin TQFP-EP package, and is specified for the extended industrial (-40°C to +85°C) temperature range. Pin-compatible lower speed versions of the MAX1190 are also available. Refer to the MAX1180MAX1184 data sheets for 105Msps/80Msps/65Msps/40Msps. In addition to these speed grades, this family includes two multiplexed output versions (MAX1185/MAX1186 for 20Msps/40Msps), for which digital data is presented time-interleaved and on a single, parallel 10-bit output port. For lower speed, pin-compatible, 8-bit versions of the MAX1190, refer to the MAX1195MAX1198 data sheets.

    • Single 3.3V Operation
    • Excellent Dynamic Performance
      • 57dB SINAD at fIN = 60MHz
      • 64dBc SFDR at fIN = 60MHz
  • -71dBc Interchannel Crosstalk at fIN = 60MHz
  • Low Power
    • 492mW (Normal Operation)
    • 10mW (Sleep Mode)
    • 3.3µW (Shutdown Mode)
  • 0.08dB Gain and 0.8° Phase Matching
  • Wide ±1VP-P Differential Analog Input VoltageRange
  • 400MHz -3dB Input Bandwidth
  • On-Chip 2.048V Precision Bandgap Reference
  • User-Selectable Output FormatTwo"s Complementor Offset Binary
  • Pin-Compatible, Lower-Speed, 10-Bit and 8-BitVersions Available

    • Детали

    Volt_supply_source

    Single
    Differential_nonlinearity

    -1, 1.5 LSB
    Sampling_rate

    120 Msps
    Volt_reference

    External, Internal
    Digital_supply_support

    No
    Architecture

    Pipelined
    Resolution

    10 Bit
    Typical_power_dissipation

    492 mW
    Eccn

    EAR99
    Signal_to_noise_ratio

    58.5 dB
    Input_type

    Voltage
    Input_signal_type

    Differential, Single-Ended
    Input_volt

    ±1 V
    Бренд

    Msl_level

    3
    Country_of_origin

    Taiwan
    Number_of_analog_inputs

    2
    Lead_finish

    Matte Tin
    Screening_level

    Extended Industrial
    Max_power_dissipation

    611 mW
    Max_processing_temp

    260, 300
    Mounting

    Surface Mount
    Operating_temp

    -40 to 85 °C
    Pin_count

    48
    Product_dimensions

    7 x 7 x 1 mm
    Schedule_b

    8542390000
    Htsn

    8542390001
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS07922/MAXMS07922-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    TQFP EP
    Number_of_adc_channels

    2
    Polarity_of_input_volt

    Bipolar
    Operating_supply_volt

    3.1, 3.3 V, 3.6
    Number_of_adcs

    2
    Digital_interface_type

    Parallel

    Похожие товары