ADC Dual Folding/Interpolating 3Gsps 8-bit Parallel 128-Pin LQFP EP Tray, ADC08B3000CIYB/NOPB, Texas Instruments

The ADC08B3000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sample rates up to 3.4 Gigasamples Per Second, (Gsps). Consuming a typical 1.6 Watts at 3 Gsps from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the calibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.1 Effective Number Of Bits, (ENOB), with a 748 MHz input signal and a 3 GHz sample rate while providing a 10-18 Code Error Rate. A sample rate of 3 Gsps is achieved by interleaving two ADCs, each operating at 1.5 Gsps. Output formatting is offset binary. The device contains a 4K Capture Buffer with output on two 8-bit Low Voltage CMOS (LVCMOS) output buses at rates up to 200MHz. The converter typically consumes less than 25 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad HLQFP and operates over the Industrial (-40°C = TA = +85°C) temperature range.

  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR Output Clocking
  • Internal selectable 4K Data Buffer
  • Serial Interface for Extended Control
  • Adjustment of Input Full-Scale Range, Offset and Clock Phase
  • Duty Cycle Corrected Sample Clock
  • Test Pattern Output Capability

Характеристики

Volt_supply_source

Single

Lead_finish

Matte Tin

Number_of_adcs

2

Operating_supply_volt

1.8, 1.9 V, 2

Supplier_package

LQFP EP

Specifications

http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC08B3000&&fileType=pdf

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

20 x 20 x 1.4 mm

Pin_count

128

Operating_temp

-40 to 85 °C

Mounting

Surface Mount

Max_processing_temp

260

Max_power_dissipation

2300 mW

Htsn

8542390001

Number_of_analog_inputs

1

Eccn

3A991.C.1

Country_of_origin

United States

Msl_level

3

Бренд

Input_volt

0.6, 0.81 Vp-p

Input_signal_type

Differential

Input_type

Voltage

Signal_to_noise_ratio

45.3(Typ) dB

Differential_nonlinearity

0.6 LSB

Typical_power_dissipation

1600 mW

Volt_reference

Internal

Sampling_rate

3 Gsps

Digital_interface_type

Parallel

Артикул: ADC08B3000CIYB/NOPB

Описание

The ADC08B3000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sample rates up to 3.4 Gigasamples Per Second, (Gsps). Consuming a typical 1.6 Watts at 3 Gsps from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the calibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.1 Effective Number Of Bits, (ENOB), with a 748 MHz input signal and a 3 GHz sample rate while providing a 10-18 Code Error Rate. A sample rate of 3 Gsps is achieved by interleaving two ADCs, each operating at 1.5 Gsps. Output formatting is offset binary. The device contains a 4K Capture Buffer with output on two 8-bit Low Voltage CMOS (LVCMOS) output buses at rates up to 200MHz. The converter typically consumes less than 25 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad HLQFP and operates over the Industrial (-40°C = TA = +85°C) temperature range.

  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR Output Clocking
  • Internal selectable 4K Data Buffer
  • Serial Interface for Extended Control
  • Adjustment of Input Full-Scale Range, Offset and Clock Phase
  • Duty Cycle Corrected Sample Clock
  • Test Pattern Output Capability

Детали

Volt_supply_source

Single

Lead_finish

Matte Tin

Number_of_adcs

2

Operating_supply_volt

1.8, 1.9 V, 2

Supplier_package

LQFP EP

Specifications

http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC08B3000&&fileType=pdf

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

20 x 20 x 1.4 mm

Pin_count

128

Operating_temp

-40 to 85 °C

Mounting

Surface Mount

Max_processing_temp

260

Max_power_dissipation

2300 mW

Htsn

8542390001

Number_of_analog_inputs

1

Eccn

3A991.C.1

Country_of_origin

United States

Msl_level

3

Бренд

Input_volt

0.6, 0.81 Vp-p

Input_signal_type

Differential

Input_type

Voltage

Signal_to_noise_ratio

45.3(Typ) dB

Differential_nonlinearity

0.6 LSB

Typical_power_dissipation

1600 mW

Volt_reference

Internal

Sampling_rate

3 Gsps

Digital_interface_type

Parallel