ADC Dual 2-Step Folding 500Msps 8-bit Parallel 128-Pin LQFP EP Tray, ADC08D500CIYB/NOPB, Texas Instruments

The ADC08D500 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS. Consuming a typical 1.4 Watts at 500 MSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a 500 MHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.Each converter has a 1:2 demultiplexer that feeds two LVDS buses and reduces the output data rate on each bus to half the sampling rate. The two converters can be interleaved and used as a single 1 GSPS ADC.The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad HLQFP and operates over the Industrial (-40°C = TA = +85°C) temperature range. 

  • Internal Sample-and-Hold
  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR Output Clocking
  • Interleave Mode for 2x Sampling Rate
  • Multiple ADC Synchronization Capability
  • Ensured No Missing Codes
  • Serial Interface for Extended Control
  • Fine Adjustment of Input Full-Scale Range and Offset
  • Duty Cycle Corrected Sample Clock
  • Resolution 8 Bits
  • Max Conversion Rate 500 MSPS (min)
  • Bit Error Rate 10-18 (typ)
  • ENOB @ 250 MHz Input 7.5 Bits (typ)
  • DNL ±0.15 LSB (typ)
  • Power Consumption
    • Operating 1.4 W (typ)
    • Power Down Mode 3.5 mW (typ)
  • Характеристики

    Volt_supply_source

    Single

    Country_of_origin

    Korea, South

    Sampling_rate

    500 Msps

    Volt_reference

    Internal

    Digital_supply_support

    No

    Architecture

    2-Step Folding

    Resolution

    8 Bit

    Typical_power_dissipation

    1400 mW

    Differential_nonlinearity

    0.6 LSB

    Signal_to_noise_ratio

    48 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    0.65, 0.87 Vp-p

    Бренд

    Msl_level

    3

    Number_of_analog_inputs

    2

    Htsn

    8542390001

    Eccn

    3A991.C.1

    Lead_finish

    Matte Tin

    Max_power_dissipation

    2000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    128

    Product_dimensions

    20 x 20 x 1.4 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC08D500&&fileType=pdf

    Supplier_package

    LQFP EP

    Operating_supply_volt

    1.8, 1.9 V, 2

    Number_of_adcs

    2

    Digital_interface_type

    Parallel

    Артикул: ADC08D500CIYB/NOPB

    Описание

    The ADC08D500 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS. Consuming a typical 1.4 Watts at 500 MSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a 500 MHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.Each converter has a 1:2 demultiplexer that feeds two LVDS buses and reduces the output data rate on each bus to half the sampling rate. The two converters can be interleaved and used as a single 1 GSPS ADC.The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad HLQFP and operates over the Industrial (-40°C = TA = +85°C) temperature range. 

  • Internal Sample-and-Hold
  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR Output Clocking
  • Interleave Mode for 2x Sampling Rate
  • Multiple ADC Synchronization Capability
  • Ensured No Missing Codes
  • Serial Interface for Extended Control
  • Fine Adjustment of Input Full-Scale Range and Offset
  • Duty Cycle Corrected Sample Clock
  • Resolution 8 Bits
  • Max Conversion Rate 500 MSPS (min)
  • Bit Error Rate 10-18 (typ)
  • ENOB @ 250 MHz Input 7.5 Bits (typ)
  • DNL ±0.15 LSB (typ)
  • Power Consumption
    • Operating 1.4 W (typ)
    • Power Down Mode 3.5 mW (typ)
  • Детали

    Volt_supply_source

    Single

    Country_of_origin

    Korea, South

    Sampling_rate

    500 Msps

    Volt_reference

    Internal

    Digital_supply_support

    No

    Architecture

    2-Step Folding

    Resolution

    8 Bit

    Typical_power_dissipation

    1400 mW

    Differential_nonlinearity

    0.6 LSB

    Signal_to_noise_ratio

    48 dB

    Input_type

    Voltage

    Input_signal_type

    Differential

    Input_volt

    0.65, 0.87 Vp-p

    Бренд

    Msl_level

    3

    Number_of_analog_inputs

    2

    Htsn

    8542390001

    Eccn

    3A991.C.1

    Lead_finish

    Matte Tin

    Max_power_dissipation

    2000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    128

    Product_dimensions

    20 x 20 x 1.4 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC08D500&&fileType=pdf

    Supplier_package

    LQFP EP

    Operating_supply_volt

    1.8, 1.9 V, 2

    Number_of_adcs

    2

    Digital_interface_type

    Parallel