Module DC-DC 1-OUT 0.8V to 3.6V 22A 10-Pin DIP Module Tray

Th PTH05020 series of non-islolated power modules offers OEM designers a combination of high performance, small footprint, and industry leading features. As part of a new class of power modules these products provide designers with the flexibility to power the most complex multi-processor digital systems using off-the-shelf catalog parts. The series employs double-sided surface mount construction and provides high-performance step-down power conversion for up to 22 A of output current from a 5-V input bus voltage. The output voltage of the PTH05020W can be set to any value over the range, 0.8 V to 3.6 V, using a single resistor. This series includes Auto-Track. Auto-Track simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down.Other operating features include an on/off inhibit, output voltage adjust (trim), and margin up/down controls. To ensure tight load regulation, an output voltage sense is also provided. A non-latching over-current trip and over-temperature shutdown provides load fault protection. Target applications include complex multi-voltage, multi-processor systems that incorporate the industry’s high-speed DSPs, micro-processors and bus drivers.

Up to 22 A Output Current

5-V Input Voltage

Wide-Output Voltage Adjust (0.8 V to 3.6 V)

Efficiencies up to 96%

155 W/in³ Power Density

On/Off Inhibit

Output Voltage Sense

Pre-Bias Startup

Margin Up/Down Controls

Under-Voltage Lockout

Auto-Track™ Sequencing

Output Over-Current Protection (Non-Latching, Auto-Reset)

Over-Temperatur Protection

Operating Temp: –40 to +85°C

IPC Lead Free 2

DSP Compatible Output Voltages

Safety Agency Approvals:
   UL 1950, CSA 22.2 950, EN60950 VDE (Pending)

Point-of-Load Alliance (POLA) Compatible