Module DC-DC 1-OUT 0.9V to 3.6V 3A 6-Pin DIP Module
The PTH04000W is a highly integrated, low-cost switching regulator module that delivers up to 3 A of output current. Occupying a small PCB area, the PTH04000W provides output current at a high efficiency and with minimal power dissipation, thereby eliminating the need for a heat sink. Their small size (0.75 inch × 0.5 inch), high efficiency, and low cost makes these modules practical for a variety of applications. The input voltage range of the PTH04000W is from 3 V to 5.5 V, allowing operation from either a 3.3-V or 5-V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH04000W can step down to voltages as low as 0.9 V from a 5-V input bus, with typically less than 1 W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9 V to 3.6 V, using a single external resistor. This series includes Auto-Track sequencing. This feature simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down. Other operating features include an undervoltage lockout (UVLO), on/off inhibit, output overcurrent protection, and overtemperature protection. Target applications include telecommunications, test and measurement applications, and high-end consumer products. The modules are available in both through-hole and surface-mount package options, including tape and reel. The PTH04000W is also compatible with TI"s roadmap for RoHS and lead-free compliance.
Up to 3-A OutputCurrent at 85°C 3.3-V / 5-V Input Voltage Wide-Output Voltage Adjust (0.9 V to 3.6 V) Efficiencies Up To 94% On/Off Inhibit Undervoltage Lockout (UVLO) Output Overcurrent Protection (Nonlatching, Auto-Reset) Overtemperature Protection Ambient Temperature Range: -40°C to 85°C Point-of-Load Alliance (POLA)™ Compatible Surface Mount Package Safety Agency Approvals: - UL/IEC/CSA-22.2 60950-1 APPLICATIONS
- Telecommunications, Instrumentation, and General-Purpose Circuits
规格参数
| Brand | Texas Instruments |
|---|---|
| Input Voltage | 3.3|5 V |
| Output Voltage | 0.9 to 3.6 V |
| Product description | 18.92 x 12.57 x 8.25 mm |
| Output Current | 3 A |
| Switching | Yes |
| Number Of | 1 |
| Type Prod | Non-Inverting|Inverting|Step Up|Step Down |
| Operating temperature | -40 to 85 °C |
| Schedule B | 8504408500 |
| HTSN | 8504408500 |
| Country of origin | Mexico |
| Lead Finish | Matte Tin |
| Supplier | DIP Module |
SKU: PTH04000WAH