MCU 32-Bit KW ARM Cortex M0+ RISC 128KB Flash 2.5V/3.3V 60-Pin MAPLGA Tray, MKW01Z128CHN, NXP

The Kinetis KW0x wireless MCU family embeds a rich set of peripherals with a high-performance bi-directional sub-1 GHz radio, capable of operating over a wide frequency range in the license free industrial, scientific and medical (ISM) frequency bands. Integrates high-performance, low-noise amplifiers and power amplifiers Runs various types of communication protocols, from proprietary (simple media access controller (SMAC)) to globally standardized (IEEE 802.15.4) Includes hardware, software, tools and reference designs to help simplify development

RF Transceiver

  • Supports 290-340 MHz, 424-510 MHz, and 862-1020 MHz frequency bands
  • High sensitivity: down to -120 dBm at 1.2 kbps
  • High selectivity: 80 dB blocking immunity
  • Low current: Rx = 16 mA
  • Programmable output: -18 to +17 dBm in 1 dB steps
  • FSK bit rates up to 600 kbps
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Packet engine with CRC, AES-128 encryption and 66-byte FIFO
  • Built-in temperature sensor and low battery indicator

MCU

  • Ultra-low-power 32-bit ARM® Cortex®-M0+ core. 2x more CoreMark/mA than the closest8/16-bit architecture. Single-cycle fast I/O access port facilitates bit banging and software protocol emulation, maintaining an 8-bit “look and feel”
  • Multiple, flexible low-power modes including new compute mode which reduces dynamic power by placing peripherals in an asynchronous stop mode
  • I²C, ADC, DAC, LP timer and DMA support low-power mode operation without waking up the core

Memory

  • 128 KB flash with 64 byte flash cache
  • 16 KB RAM

Peripherals

  • 16-bit ADC with configurable resolution, sample time and conversion speed/power
  • High-speed comparator with internal 6-bit DAC
  • 12-bit DAC with DMA support

Interfaces

  • Capacitive touch sense interface supports external electrodes
  • GPIO with pin interrupt support, DMA request capability and other pin control options
  • One I²C with DMA support, up to 100Kbps and compatible with MBus V2 features
  • One LPUART and two UART with DMA support

Operating Voltage and Temperature Range

  • 1.8 to 3.6 V operating voltage with on-chip voltage regulators
  • Temperature range of -40° C to +85° C

Software

  • Radio Test Tool
    • Run on PC connected through USB
    • Allow fast evaluation of the radio performance in a lab environment without need for writing software
    • Analysis of TX spectrum (output power, harmonics)
    • Modulation scheme impact (GFSK, BT, Mod index) on spectrum
    • Help on matching network tuning
    • Analysis of RX Sensitivity performance (RSSI, LNA input impedance, OOK threshold, AFC)
  • SMAC (Simple Media Access Controller)
    • Simple communication and test apps based on drivers/PHY utilities available as source code.
    • Small footprint (<10>
    • Supports point-to-point communication (bi-directional RF communication link), broadcast communication

Характеристики

Product_dimensions

8 x 8 x 0.98(Max)

Htsn

8542310001

Program_memory_type

Flash

Program_memory_size

128 KB

Pin_count

60

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

2.5, 3.3 V

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0001962402/PHGL-S-A0001962402-1.pdf?hkey=52A5661711E402568146F3353EA87419

Number_of_timers

3

Schedule_b

8542310000

Device_core

ARM Cortex M0+

Eccn

5A992.C

Data_bus_width

32 Bit

Country_of_origin

China

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/UART

Number_of_programmable_i_os

27

Max_speed

48 MHz

Mounting

Surface Mount

Артикул: MKW01Z128CHN

Описание

The Kinetis KW0x wireless MCU family embeds a rich set of peripherals with a high-performance bi-directional sub-1 GHz radio, capable of operating over a wide frequency range in the license free industrial, scientific and medical (ISM) frequency bands. Integrates high-performance, low-noise amplifiers and power amplifiers Runs various types of communication protocols, from proprietary (simple media access controller (SMAC)) to globally standardized (IEEE 802.15.4) Includes hardware, software, tools and reference designs to help simplify development

RF Transceiver

  • Supports 290-340 MHz, 424-510 MHz, and 862-1020 MHz frequency bands
  • High sensitivity: down to -120 dBm at 1.2 kbps
  • High selectivity: 80 dB blocking immunity
  • Low current: Rx = 16 mA
  • Programmable output: -18 to +17 dBm in 1 dB steps
  • FSK bit rates up to 600 kbps
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Packet engine with CRC, AES-128 encryption and 66-byte FIFO
  • Built-in temperature sensor and low battery indicator

MCU

  • Ultra-low-power 32-bit ARM® Cortex®-M0+ core. 2x more CoreMark/mA than the closest8/16-bit architecture. Single-cycle fast I/O access port facilitates bit banging and software protocol emulation, maintaining an 8-bit “look and feel”
  • Multiple, flexible low-power modes including new compute mode which reduces dynamic power by placing peripherals in an asynchronous stop mode
  • I²C, ADC, DAC, LP timer and DMA support low-power mode operation without waking up the core

Memory

  • 128 KB flash with 64 byte flash cache
  • 16 KB RAM

Peripherals

  • 16-bit ADC with configurable resolution, sample time and conversion speed/power
  • High-speed comparator with internal 6-bit DAC
  • 12-bit DAC with DMA support

Interfaces

  • Capacitive touch sense interface supports external electrodes
  • GPIO with pin interrupt support, DMA request capability and other pin control options
  • One I²C with DMA support, up to 100Kbps and compatible with MBus V2 features
  • One LPUART and two UART with DMA support

Operating Voltage and Temperature Range

  • 1.8 to 3.6 V operating voltage with on-chip voltage regulators
  • Temperature range of -40° C to +85° C

Software

  • Radio Test Tool
    • Run on PC connected through USB
    • Allow fast evaluation of the radio performance in a lab environment without need for writing software
    • Analysis of TX spectrum (output power, harmonics)
    • Modulation scheme impact (GFSK, BT, Mod index) on spectrum
    • Help on matching network tuning
    • Analysis of RX Sensitivity performance (RSSI, LNA input impedance, OOK threshold, AFC)
  • SMAC (Simple Media Access Controller)
    • Simple communication and test apps based on drivers/PHY utilities available as source code.
    • Small footprint (<10>
    • Supports point-to-point communication (bi-directional RF communication link), broadcast communication

Детали

Product_dimensions

8 x 8 x 0.98(Max)

Htsn

8542310001

Program_memory_type

Flash

Program_memory_size

128 KB

Pin_count

60

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

2.5, 3.3 V

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0001962402/PHGL-S-A0001962402-1.pdf?hkey=52A5661711E402568146F3353EA87419

Number_of_timers

3

Schedule_b

8542310000

Device_core

ARM Cortex M0+

Eccn

5A992.C

Data_bus_width

32 Bit

Country_of_origin

China

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/UART

Number_of_programmable_i_os

27

Max_speed

48 MHz

Mounting

Surface Mount