MCU 32-bit LPC800 ARM Cortex M0+ RISC 4KB Flash 3.3V 8-Pin PDIP, LPC810M021FN8FP, NXP

The LPC81xM are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC81xM support up to 16 kB of flash memory and 4 kB of SRAM. The peripheral complement of the LPC81xM includes a CRC engine, one I2C-bus interface, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self wake-up timer, and state-configurable timer, one comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 18 general-purpose I/O pins.

  • System:
    • ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.
    • ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
    • System tick timer.
    • Serial Wire Debug (SWD) and JTAG boundary scan modes supported.
    • Micro Trace Buffer (MTB) supported.
  • Memory:
    • Up to 16 kB on-chip flash programming memory with 64 Byte page write and erase.
    • Up to 4 kB SRAM.
  • ROM API support:
    • Boot loader.
    • USART drivers.
    • I2C drivers.
    • Power profiles.
    • Flash In-Application Programming (IAP) and In-System Programming (ISP).
  • Digital peripherals:
    • High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 18 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and glitch filter.
    • High-current source output driver (20 mA) on four pins.
    • High-current sink driver (20 mA) on two true open-drain pins.
    • GPIO interrupt generation capability with boolean pattern-matching feature on eight GPIO inputs.
    • Switch matrix for flexible configuration of each I/O pin function.

Характеристики

Product_dimensions

9.8 x 6.48 x 3.43 mm

Htsn

8542330001

Ram_size

1 KB

Program_memory_type

Flash

Program_memory_size

4 Kb

Pin_count

8

Supplier_package

PDIP

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

3.3 V

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0001056910/PHGL-S-A0001056910-1.pdf?hkey=52A5661711E402568146F3353EA87419

Watchdog

1

Number_of_timers

3

Analog_comparators

1

Schedule_b

8542330000

Device_core

ARM Cortex M0+

Eccn

EAR99

Data_bus_width

32 Bit

Country_of_origin

United States

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/USART

Number_of_programmable_i_os

6

Max_speed

30 MHz

Mounting

Through Hole

Min_operating_supply_voltage

1.8 V

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Gold, Matte Tin

Артикул: LPC810M021FN8FP

Описание

The LPC81xM are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC81xM support up to 16 kB of flash memory and 4 kB of SRAM. The peripheral complement of the LPC81xM includes a CRC engine, one I2C-bus interface, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self wake-up timer, and state-configurable timer, one comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 18 general-purpose I/O pins.

  • System:
    • ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.
    • ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
    • System tick timer.
    • Serial Wire Debug (SWD) and JTAG boundary scan modes supported.
    • Micro Trace Buffer (MTB) supported.
  • Memory:
    • Up to 16 kB on-chip flash programming memory with 64 Byte page write and erase.
    • Up to 4 kB SRAM.
  • ROM API support:
    • Boot loader.
    • USART drivers.
    • I2C drivers.
    • Power profiles.
    • Flash In-Application Programming (IAP) and In-System Programming (ISP).
  • Digital peripherals:
    • High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 18 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and glitch filter.
    • High-current source output driver (20 mA) on four pins.
    • High-current sink driver (20 mA) on two true open-drain pins.
    • GPIO interrupt generation capability with boolean pattern-matching feature on eight GPIO inputs.
    • Switch matrix for flexible configuration of each I/O pin function.

Детали

Product_dimensions

9.8 x 6.48 x 3.43 mm

Htsn

8542330001

Ram_size

1 KB

Program_memory_type

Flash

Program_memory_size

4 Kb

Pin_count

8

Supplier_package

PDIP

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

3.3 V

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0001056910/PHGL-S-A0001056910-1.pdf?hkey=52A5661711E402568146F3353EA87419

Watchdog

1

Number_of_timers

3

Analog_comparators

1

Schedule_b

8542330000

Device_core

ARM Cortex M0+

Eccn

EAR99

Data_bus_width

32 Bit

Country_of_origin

United States

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/USART

Number_of_programmable_i_os

6

Max_speed

30 MHz

Mounting

Through Hole

Min_operating_supply_voltage

1.8 V

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Gold, Matte Tin