MCU 32-bit LPC1700 ARM Cortex M3 RISC 256KB Flash 3.3V 100-Pin LQFP Tray, LPC1766FBD100,551, NXP

The LPC1766 are ARM Cortex-M3 based microcontrollers for embedded applications featuring a high level of integration and low power consumption. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1766 operate at CPU frequencies of up to 100 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The LPC1766 is pin-compatible to the 100-pin LPC236x ARM7-based microcontroller series.

  • ARM Cortex-M3 processor, running at frequencies of up to 100 MHz LPC1766. A Memory Protection Unit (MPU) supporting eight regions is included.
  • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
  • Up to 512 kB on-chip flash programming memory. Enhanced flash memory accelerator enables high-speed 120 MHz operation with zero wait states.
  • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
  • On-chip SRAM includes:
    • 32/16 kB of SRAM on the CPU with local code/data bus for high-performance CPU access.
    • Two/one 16 kB SRAM blocks with separate access paths for higher throughput. These SRAM blocks may be used for Ethernet, USB, and DMA memory, as well as for general purpose CPU instruction and data storage.
  • Serial interfaces: Ethernet MAC, USB 2.0
  • Single 3.3 V power supply (2.4 V to 3.6 V)
  • Crystal oscillator with an operating range of 1 MHz to 25 MHz
  • Available as LQFP100 (14 mm x 14 mm x 1.4 mm), TFBGA1001 (9 mm x 9 mm x 0.7 mm).

Характеристики

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0005068107/PHGL-S-A0005068107-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

CAN Controller

Schedule_b

8542310000

Ram_size

64 KB

Program_memory_size

256 KB

Product_dimensions

14.1 x 14.1 x 1.45 mm

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

3.3 V

Watchdog

1

Eccn

EAR99

Instruction_set_architecture

RISC

Htsn

8542310001

Тип интерфейса

CAN/Ethernet/I2C/I2S/SPI/SSP/UART/USB

Device_core

ARM Cortex M3

Data_bus_width

32 Bit

Country_of_origin

Taiwan

Бренд

On_chip_adc

8-chx12-bit

Min_operating_supply_voltage

2.4 V

Number_of_timers

4

Number_of_programmable_i_os

70

Msl_level

3

Mounting

Surface Mount

Max_speed

100 MHz

Max_processing_temp

260 °C

Max_power_dissipation

1500 mW

Max_operating_supply_voltage

3.6 V

Max_expanded_memory_size

1 GB

Lead_finish

Tin

Артикул: LPC1766FBD100,551

Описание

The LPC1766 are ARM Cortex-M3 based microcontrollers for embedded applications featuring a high level of integration and low power consumption. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1766 operate at CPU frequencies of up to 100 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The LPC1766 is pin-compatible to the 100-pin LPC236x ARM7-based microcontroller series.

  • ARM Cortex-M3 processor, running at frequencies of up to 100 MHz LPC1766. A Memory Protection Unit (MPU) supporting eight regions is included.
  • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
  • Up to 512 kB on-chip flash programming memory. Enhanced flash memory accelerator enables high-speed 120 MHz operation with zero wait states.
  • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
  • On-chip SRAM includes:
    • 32/16 kB of SRAM on the CPU with local code/data bus for high-performance CPU access.
    • Two/one 16 kB SRAM blocks with separate access paths for higher throughput. These SRAM blocks may be used for Ethernet, USB, and DMA memory, as well as for general purpose CPU instruction and data storage.
  • Serial interfaces: Ethernet MAC, USB 2.0
  • Single 3.3 V power supply (2.4 V to 3.6 V)
  • Crystal oscillator with an operating range of 1 MHz to 25 MHz
  • Available as LQFP100 (14 mm x 14 mm x 1.4 mm), TFBGA1001 (9 mm x 9 mm x 0.7 mm).

Детали

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0005068107/PHGL-S-A0005068107-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

CAN Controller

Schedule_b

8542310000

Ram_size

64 KB

Program_memory_size

256 KB

Product_dimensions

14.1 x 14.1 x 1.45 mm

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

3.3 V

Watchdog

1

Eccn

EAR99

Instruction_set_architecture

RISC

Htsn

8542310001

Тип интерфейса

CAN/Ethernet/I2C/I2S/SPI/SSP/UART/USB

Device_core

ARM Cortex M3

Data_bus_width

32 Bit

Country_of_origin

Taiwan

Бренд

On_chip_adc

8-chx12-bit

Min_operating_supply_voltage

2.4 V

Number_of_timers

4

Number_of_programmable_i_os

70

Msl_level

3

Mounting

Surface Mount

Max_speed

100 MHz

Max_processing_temp

260 °C

Max_power_dissipation

1500 mW

Max_operating_supply_voltage

3.6 V

Max_expanded_memory_size

1 GB

Lead_finish

Tin