MCU 32-Bit K82 ARM Cortex M4F RISC 256KB Flash 3.3V 100-Pin LQFP Tray, MK82FN256VLL15, NXP

The K82 sub-family extends Kinetis products with new hardware security mechanisms including decryption from serial NOR flash memory, AES128, AES256 with side band attack protection, and Elliptical Curve Cryptography acceleration. These advancements are done while maintaining a high level of compatibility with previous Kinetis devices. The MCUs range in total flash space upto 256KB and have 256KB of SRAM. The QuadSPI interface supports connections to Non-Volatile Memory for data or code. The extended memory resources and new security features allow developers to enhance their embedded applications with greater capability.

  • Performance
    • Up to 150 MHz ARM Cortex-M4 based core with DSP instructions and Single Precision Floating Point unit
  • Memories and memory expansion
    • Up to 256 KB program flash with 256 KB RAM
    • FlexBus external bus interface and SDRAM controller
    • Dual QuadSPI with OTF decryption and XIP
    • 32 KB Boot ROM with built in bootloader
    • Supports SDR and DDR serial flash and octal configurations
  • System and Clocks
    • Multiple low-power modes
    • Memory protection unit with multi-master protection
    • 3 to 32 MHz main crystal oscillator
    • 32 kHz low power crystal oscillator
    • 48 MHz internal reference
  • Timers
    • One 4 ch-Periodic interrupt timer
    • Two 16-bit low-power timer PWM modules
    • Two 8-ch motor control/general purpose/PWM timers
    • Two 2-ch quadrature decoder/general purpose timers
    • Real-time clock with independent 3.3V power domain
    • Programmable delay block
  • Human-machine interface
    • Low-power hardware touch sensor interface (TSI)
    • General-purpose input/output
  • Analog modules
    • One 16-bit SAR ADCs, two 6-bit DAC and one 12-bit DAC
    • Two analog comparators (CMP) containing a 6-bit DAC and programmable reference input
    • Voltage reference 1.2V
  • Operating Characteristics
    • Main VDD Voltage and Flash write voltage range:1.71V–3.6 V
    • Temperature range (ambient): -40 to 105°C
    • Independent VDDIO for PORTE (QuadSPI):1.71V–3.6 V
  • Communication interfaces
    • USB full-/low-speed On-the-Go controller
    • Secure Digital Host Controller (SDHC) and FlexIO
    • One I2S module, three SPI, four I²C modules and five LPUART modules
  • Security
    • LP Trusted Crypto (LTC) hardware accelerators supporting AES, DES, 3DES,RSA and ECC
    • Hardware random-number generator
    • Supports DES, AES, SHA accelerator (CAU)
    • Multiple levels of embedded flash security

Характеристики

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0002885445/PHGL-S-A0002885445-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

256 KB

Program_memory_size

256 KB

Product_dimensions

14 x 14 x 1.4

Pin_count

100

Operating_temperature

-40 to 105 °C

Operating_supply_voltage

3.3 V

Analog_comparators

2

Eccn

5A992

Instruction_set_architecture

RISC

Htsn

8542310001

Тип интерфейса

I2C/I2S/LPUART/SPI/SDHC/USB

Device_core

ARM Cortex M4F

Data_bus_width

32 Bit

Country_of_origin

Malaysia

Бренд

Min_operating_supply_voltage

1.71 V

Number_of_timers

7

Number_of_programmable_i_os

66

Msl_level

3

Mounting

Surface Mount

Max_speed

150 MHz

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Copper, Silver, Tin

Артикул: MK82FN256VLL15

Описание

The K82 sub-family extends Kinetis products with new hardware security mechanisms including decryption from serial NOR flash memory, AES128, AES256 with side band attack protection, and Elliptical Curve Cryptography acceleration. These advancements are done while maintaining a high level of compatibility with previous Kinetis devices. The MCUs range in total flash space upto 256KB and have 256KB of SRAM. The QuadSPI interface supports connections to Non-Volatile Memory for data or code. The extended memory resources and new security features allow developers to enhance their embedded applications with greater capability.

  • Performance
    • Up to 150 MHz ARM Cortex-M4 based core with DSP instructions and Single Precision Floating Point unit
  • Memories and memory expansion
    • Up to 256 KB program flash with 256 KB RAM
    • FlexBus external bus interface and SDRAM controller
    • Dual QuadSPI with OTF decryption and XIP
    • 32 KB Boot ROM with built in bootloader
    • Supports SDR and DDR serial flash and octal configurations
  • System and Clocks
    • Multiple low-power modes
    • Memory protection unit with multi-master protection
    • 3 to 32 MHz main crystal oscillator
    • 32 kHz low power crystal oscillator
    • 48 MHz internal reference
  • Timers
    • One 4 ch-Periodic interrupt timer
    • Two 16-bit low-power timer PWM modules
    • Two 8-ch motor control/general purpose/PWM timers
    • Two 2-ch quadrature decoder/general purpose timers
    • Real-time clock with independent 3.3V power domain
    • Programmable delay block
  • Human-machine interface
    • Low-power hardware touch sensor interface (TSI)
    • General-purpose input/output
  • Analog modules
    • One 16-bit SAR ADCs, two 6-bit DAC and one 12-bit DAC
    • Two analog comparators (CMP) containing a 6-bit DAC and programmable reference input
    • Voltage reference 1.2V
  • Operating Characteristics
    • Main VDD Voltage and Flash write voltage range:1.71V–3.6 V
    • Temperature range (ambient): -40 to 105°C
    • Independent VDDIO for PORTE (QuadSPI):1.71V–3.6 V
  • Communication interfaces
    • USB full-/low-speed On-the-Go controller
    • Secure Digital Host Controller (SDHC) and FlexIO
    • One I2S module, three SPI, four I²C modules and five LPUART modules
  • Security
    • LP Trusted Crypto (LTC) hardware accelerators supporting AES, DES, 3DES,RSA and ECC
    • Hardware random-number generator
    • Supports DES, AES, SHA accelerator (CAU)
    • Multiple levels of embedded flash security

Детали

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0002885445/PHGL-S-A0002885445-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

256 KB

Program_memory_size

256 KB

Product_dimensions

14 x 14 x 1.4

Pin_count

100

Operating_temperature

-40 to 105 °C

Operating_supply_voltage

3.3 V

Analog_comparators

2

Eccn

5A992

Instruction_set_architecture

RISC

Htsn

8542310001

Тип интерфейса

I2C/I2S/LPUART/SPI/SDHC/USB

Device_core

ARM Cortex M4F

Data_bus_width

32 Bit

Country_of_origin

Malaysia

Бренд

Min_operating_supply_voltage

1.71 V

Number_of_timers

7

Number_of_programmable_i_os

66

Msl_level

3

Mounting

Surface Mount

Max_speed

150 MHz

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Copper, Silver, Tin