Audio Amp Speaker 1-CH Mono/2-CH Stereo 28W Class-D 48-Pin HTSSOP EP T/R, TAS5756MDCAR, Texas Instruments

The TAS5756M device is a high-performance, stereo closed-loop amplifier withintegrated audio processor with PurePath HybridFlow architecture. To convertfrom digital to analog, it uses a high performance DAC with Burr-Brown mixedsignal heritage. It requires only two power supplies: one DVDD for low-voltagecircuitry and one PVDD for high-voltage circuitry. It is controlled via asoftware control port using standard I2C communication. In thefamily, the TAS5756M uses traditional BD modulation, ensuring low distortioncharacteristics. The TAS5754M uses 1SPW modulation, reducing the idle currentdraw at the expense of slightly higher distortion. The unique HybridFlow architecture allows the system designer to choose fromseveral configurable DSP programs, specifically designed for use in popularaudio end equipment such as bluetooth (BT) speakers, sound bars, dockingstations, and subwoofers. This combines the flexibility of a fully programmabledevice with the fast download time and ease of use of a fixed function ROMdevice. An optimal mix of thermal performance and device cost is provided in the 90mO rDS(on) of the output MOSFETs. Additionally, a thermally enhanced48-Pin HTSSOP provides excellent operation in the elevated ambient temperaturesfound in modern consumer electronic devices.For all available packages, see 

  • Flexible Audio I/O Configuration
    • Supports I2S, TDM, LJ, RJ Digital Input
    • 8 kHz to 192 kHz Sample Rate Support
    • Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL)Operation
    • BD Modulation with TAS5756M, 1SPW Modulation with TAS5754M
    • Supports 3-Wire Digital Audio Interface (No MCLK required)
  • High Performance Closed-Loop Architecture (PVDD = 12V, RSPK = 8O, SPK_GAIN = 20dBV)
    • Idle Channel Noise = 56 µVrms (A-Wtd)
    • THD+N = 0.006 % (at 1 W, 1 kHz)
    • SNR = 104 A-Wtd (Ref. to THD+N = 1%)
  • PurePath HybridFlow Processing Architecture
    • Several Configurable MiniDSP Programs (called HybridFlows)
    • Download Time <100 ms (typ)
    • Advanced Audio Processing Algorithms
  • Communication Features
    • Software Mode Control via I2C Port
    • Two Address Select Pins – Up to 4 Devices
  • Robustness and Reliability Features
    • Clock Error, DC, and Short-Circuit Protection
    • Over Temperature and Overcurrent Protection
  • Характеристики

    Бренд

    Lead_finish

    Gold Over Nickel Palladium

    Power_supply_type

    Quad

    Pin_count

    48

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -25 to 85 °C

    Operating_supply_voltage

    12, 15, 18, 24 V, 3, 5, 9

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Max_power_dissipation

    1002 mW

    Input_signal_type

    Single

    Typ_output_power_x_chan_load

    28×2@8Ohm W, 56×1@4Ohm

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Screening_level

    Industrial

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5756M&&fileType=pdf

    Max_input_offset_voltage

    15@24V mV

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.018@8Ohm@1W %

    Product_dimensions

    12.5 x 6.1 x 1.05(Max)

    Артикул: TAS5756MDCAR

    Описание

    The TAS5756M device is a high-performance, stereo closed-loop amplifier withintegrated audio processor with PurePath HybridFlow architecture. To convertfrom digital to analog, it uses a high performance DAC with Burr-Brown mixedsignal heritage. It requires only two power supplies: one DVDD for low-voltagecircuitry and one PVDD for high-voltage circuitry. It is controlled via asoftware control port using standard I2C communication. In thefamily, the TAS5756M uses traditional BD modulation, ensuring low distortioncharacteristics. The TAS5754M uses 1SPW modulation, reducing the idle currentdraw at the expense of slightly higher distortion. The unique HybridFlow architecture allows the system designer to choose fromseveral configurable DSP programs, specifically designed for use in popularaudio end equipment such as bluetooth (BT) speakers, sound bars, dockingstations, and subwoofers. This combines the flexibility of a fully programmabledevice with the fast download time and ease of use of a fixed function ROMdevice. An optimal mix of thermal performance and device cost is provided in the 90mO rDS(on) of the output MOSFETs. Additionally, a thermally enhanced48-Pin HTSSOP provides excellent operation in the elevated ambient temperaturesfound in modern consumer electronic devices.For all available packages, see 

  • Flexible Audio I/O Configuration
    • Supports I2S, TDM, LJ, RJ Digital Input
    • 8 kHz to 192 kHz Sample Rate Support
    • Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL)Operation
    • BD Modulation with TAS5756M, 1SPW Modulation with TAS5754M
    • Supports 3-Wire Digital Audio Interface (No MCLK required)
  • High Performance Closed-Loop Architecture (PVDD = 12V, RSPK = 8O, SPK_GAIN = 20dBV)
    • Idle Channel Noise = 56 µVrms (A-Wtd)
    • THD+N = 0.006 % (at 1 W, 1 kHz)
    • SNR = 104 A-Wtd (Ref. to THD+N = 1%)
  • PurePath HybridFlow Processing Architecture
    • Several Configurable MiniDSP Programs (called HybridFlows)
    • Download Time <100 ms (typ)
    • Advanced Audio Processing Algorithms
  • Communication Features
    • Software Mode Control via I2C Port
    • Two Address Select Pins – Up to 4 Devices
  • Robustness and Reliability Features
    • Clock Error, DC, and Short-Circuit Protection
    • Over Temperature and Overcurrent Protection
  • Детали

    Бренд

    Lead_finish

    Gold Over Nickel Palladium

    Power_supply_type

    Quad

    Pin_count

    48

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -25 to 85 °C

    Operating_supply_voltage

    12, 15, 18, 24 V, 3, 5, 9

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Max_power_dissipation

    1002 mW

    Input_signal_type

    Single

    Typ_output_power_x_chan_load

    28×2@8Ohm W, 56×1@4Ohm

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Screening_level

    Industrial

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5756M&&fileType=pdf

    Max_input_offset_voltage

    15@24V mV

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.018@8Ohm@1W %

    Product_dimensions

    12.5 x 6.1 x 1.05(Max)