Audio Amp Speaker 2-CH Stereo 15W Class-D 28-Pin HTSSOP EP Tube, TPA3110D2PWP, Texas Instruments

The TPA3110D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a “virtual” voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3110D2 can drive stereo speakers as low as 4 ?. The high efficiency of the TPA3110D2, 90%, eliminates the need for an external heat sink when playing music. The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.  

  • 15-W/ch into an 8-? Loads at 10% THD+N From a 16-V Supply
  • 10-W/ch into 8-? Loads at 10% THD+N From a 13-V Supply
  • 30-W into a 4-? Mono Load at 10% THD+N From a 16-V Supply
  • 90% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Wide Supply Voltage Range Allows Operation from 8 V to 26 V
  • Filter-Free Operation
  • SpeakerGuard Speaker Protection Includes Adjustable Power Limiter plus DC Protection
  • Flow Through Pin Out Facilitates Easy Board Layout
  • Robust Pin-to-Pin Short Circuit Protection and Thermal Protection with Auto Recovery Option
  • Excellent THD+N / Pop-Free Performance
  • Four Selectable, Fixed Gain Settings
  • Differential Inputs
  • Характеристики

    Бренд

    Lead_finish

    Gold

    Power_supply_type

    Single

    Pin_count

    28

    Output_type

    2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Input_signal_type

    Differential

    Typ_output_power_x_chan_load

    15×2@8Ohm W

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3110D2&&fileType=pdf

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.1@8Ohm@7.5W %

    Product_dimensions

    9.8 x 4.5 x 1.05 mm

    Артикул: TPA3110D2PWP

    Описание

    The TPA3110D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a “virtual” voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3110D2 can drive stereo speakers as low as 4 ?. The high efficiency of the TPA3110D2, 90%, eliminates the need for an external heat sink when playing music. The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.  

  • 15-W/ch into an 8-? Loads at 10% THD+N From a 16-V Supply
  • 10-W/ch into 8-? Loads at 10% THD+N From a 13-V Supply
  • 30-W into a 4-? Mono Load at 10% THD+N From a 16-V Supply
  • 90% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Wide Supply Voltage Range Allows Operation from 8 V to 26 V
  • Filter-Free Operation
  • SpeakerGuard Speaker Protection Includes Adjustable Power Limiter plus DC Protection
  • Flow Through Pin Out Facilitates Easy Board Layout
  • Robust Pin-to-Pin Short Circuit Protection and Thermal Protection with Auto Recovery Option
  • Excellent THD+N / Pop-Free Performance
  • Four Selectable, Fixed Gain Settings
  • Differential Inputs
  • Детали

    Бренд

    Lead_finish

    Gold

    Power_supply_type

    Single

    Pin_count

    28

    Output_type

    2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Input_signal_type

    Differential

    Typ_output_power_x_chan_load

    15×2@8Ohm W

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3110D2&&fileType=pdf

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.1@8Ohm@7.5W %

    Product_dimensions

    9.8 x 4.5 x 1.05 mm