Description
The TDA8542 is a two channel audio power amplifier for an output power of 2 × 0.7 W with a 16 O load at a 5 V supply. At a low supply voltage of 3.3 V an output power of 0.6 W with an 8 O load can be obtained. The circuit contains two Bridge-Tied Load (BTL) amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The TDA8542TS is available in a SSOP20 package.
- Flexibility in use
- Few external components
- Low saturation voltage of output stage
- Gain can be fixed with external resistors
- Standby mode controlled by CMOS compatible levels
- Low standby current
- No switch-on/switch-off plops
- High supply voltage ripple rejection
- Protected against electrostatic discharge
- Outputs short-circuit safe to ground, VCC and across the load
- Thermally protected.
