Audio Amp Speaker 2-CH Stereo 1.5W Class-D 18-Pin uSMD T/R, LM48413TL/NOPB, Texas Instruments

The LM48413 is a single supply, high efficiency, 1.2W/channel, filterless switching audio amplifier. The LM48413 features Texas Instruments" Enhanced Emissions Suppression (E2S) system – a unique patented ultra low EMI, spread spectrum, PWM architecture. It significantly reduces RF emission while preserving audio quality and efficiency. The E2S system improves battery life, reduces external component count, board area consumption, system cost and product design cycle time. The LM48413TL is available in a micro-SMD package, further saving space.The LM48413 is designed to meet the demands of mobile phones and other portable communication devices. Operating from a single 5V supply, the device is capable of delivering 1.2W/channel of continuous output power to a 8? load with less than 1% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The wide band spread spectrum architecture of the LM48413 reduces EMI-radiated emissions due to the modulator frequency.The LM48413 features high efficiency compared with conventional Class AB amplifiers. The E2S system includes an advanced, patent-pending edge rate control (ERC) architecture that further reduce emissions by minimizing the high frequency components of the device output, while maintaining its high quality audio reproduction and high efficiency (? = 85% at VDD = 3.6V, PO = 500mW). The LM48413 also includes Texas Instruments" 3D audio enhancement that improves stereo sound quality. In devices where the left and right speakers are in close proximity, 3D enhancement affects channel specialization, widening the perceived soundstage.Output short circuit protection prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power up/down and during shutdown. Shutdown control also provided to maximizes power savings.

  • E2S System Reduces EMI Preserving Audio Quality and Efficiency
  • Output Short Circuit Protection
  • Stereo Class D Operation
  • No Output Filter Required
  • Texas Instruments 3D Enhancement
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving Approximately 2mm x 2.2mm DSBGA Package
  • Quiescent Power Supply Current at 3.6V Supply 4mA (Typ)
  • Power Output at VDD = 5V, RL = 8?, THD = 1% 1.2 W (Typ)
  • Shutdown Current 0.03µA (Typ)
  • Efficiency at 3.6V, 100mW into 8? 80% (Typ)
  • Efficiency at 3.6V, 500mW into 8? 80% (Typ)
  • Efficiency at 5V, 1W into 8? 86% (Typ)
  • Характеристики

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Dual

    Pin_count

    18

    Output_type

    2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    5 V

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Tin/Silver/Copper

    Htsn

    8542330001

    Typical_psrr

    91 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    uSMD

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48413&&fileType=pdf

    Min_cmrr

    72 dB

    Typical_voltage_gain

    24 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Typ_output_power_x_chan_load

    1.5×2@8Ohm W

    Product_dimensions

    2.25 x 2.05 x 0.41 mm

    Артикул: LM48413TL/NOPB

    Описание

    The LM48413 is a single supply, high efficiency, 1.2W/channel, filterless switching audio amplifier. The LM48413 features Texas Instruments" Enhanced Emissions Suppression (E2S) system – a unique patented ultra low EMI, spread spectrum, PWM architecture. It significantly reduces RF emission while preserving audio quality and efficiency. The E2S system improves battery life, reduces external component count, board area consumption, system cost and product design cycle time. The LM48413TL is available in a micro-SMD package, further saving space.The LM48413 is designed to meet the demands of mobile phones and other portable communication devices. Operating from a single 5V supply, the device is capable of delivering 1.2W/channel of continuous output power to a 8? load with less than 1% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The wide band spread spectrum architecture of the LM48413 reduces EMI-radiated emissions due to the modulator frequency.The LM48413 features high efficiency compared with conventional Class AB amplifiers. The E2S system includes an advanced, patent-pending edge rate control (ERC) architecture that further reduce emissions by minimizing the high frequency components of the device output, while maintaining its high quality audio reproduction and high efficiency (? = 85% at VDD = 3.6V, PO = 500mW). The LM48413 also includes Texas Instruments" 3D audio enhancement that improves stereo sound quality. In devices where the left and right speakers are in close proximity, 3D enhancement affects channel specialization, widening the perceived soundstage.Output short circuit protection prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power up/down and during shutdown. Shutdown control also provided to maximizes power savings.

  • E2S System Reduces EMI Preserving Audio Quality and Efficiency
  • Output Short Circuit Protection
  • Stereo Class D Operation
  • No Output Filter Required
  • Texas Instruments 3D Enhancement
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving Approximately 2mm x 2.2mm DSBGA Package
  • Quiescent Power Supply Current at 3.6V Supply 4mA (Typ)
  • Power Output at VDD = 5V, RL = 8?, THD = 1% 1.2 W (Typ)
  • Shutdown Current 0.03µA (Typ)
  • Efficiency at 3.6V, 100mW into 8? 80% (Typ)
  • Efficiency at 3.6V, 500mW into 8? 80% (Typ)
  • Efficiency at 5V, 1W into 8? 86% (Typ)
  • Детали

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Dual

    Pin_count

    18

    Output_type

    2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    5 V

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Tin/Silver/Copper

    Htsn

    8542330001

    Typical_psrr

    91 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    uSMD

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48413&&fileType=pdf

    Min_cmrr

    72 dB

    Typical_voltage_gain

    24 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Typ_output_power_x_chan_load

    1.5×2@8Ohm W

    Product_dimensions

    2.25 x 2.05 x 0.41 mm