Audio Amp Speaker 2-CH Stereo 2.5W Class-D 16-Pin LLP EP T/R, LM4674SQ/NOPB, Texas Instruments

The LM4674 is a single supply, high efficiency, 2.5W/channel, filterless switching audio amplifier. A low noise PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.The LM4674 is designed to meet the demands of mobile phones and other portable communication devices. Operating from a single 5V supply, the device is capable of delivering 2.5W/channel of continuous output power to a 4? load with less than 10% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM4674 features high efficiency compared to conventional Class AB amplifiers. When driving an 8? speaker from a 3.6V supply, the device features 85% efficiency at PO = 500mW. Four gain options are pin selectable through the G0 and G1 pins.Output short circuit protection prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. Independent left/right shutdown control maximizes power savings in mixed mono/stereo applications.

  • Output Short Circuit Protection
  • Stereo Class D Operation
  • No Output Filter Required
  • Logic Selectable Gain
  • Independent Shutdown Control
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving 2mm x 2mm x 0.6mm DSBGA, and 4mm x 4mm x 0.8mm WQFN Packages
  • Efficiency at 3.6V, 100mW into 8?: 80% (typ)
  • Efficiency at 3.6V, 500mW into 8?: 85% (typ)
  • Efficiency at 5V, 1W into 8?: 85% (typ)
  • Quiescent Power Supply Current
    at 3.6V supply: 4mA
  • Power Output at VDD = 5V,
    RL = 4?, THD = 10%: 2.5 W (typ)
  • Shutdown Current: 0.03µA (typ)
  • Характеристики

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    2.5×2@4Ohm W

    Totl_harmon_distortion_noise

    0.05@8Ohm@300mW %, 0.07@8Ohm@500mW

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    24 dB

    Min_cmrr

    67 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4674&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    75 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm

    Артикул: LM4674SQ/NOPB

    Описание

    The LM4674 is a single supply, high efficiency, 2.5W/channel, filterless switching audio amplifier. A low noise PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.The LM4674 is designed to meet the demands of mobile phones and other portable communication devices. Operating from a single 5V supply, the device is capable of delivering 2.5W/channel of continuous output power to a 4? load with less than 10% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM4674 features high efficiency compared to conventional Class AB amplifiers. When driving an 8? speaker from a 3.6V supply, the device features 85% efficiency at PO = 500mW. Four gain options are pin selectable through the G0 and G1 pins.Output short circuit protection prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. Independent left/right shutdown control maximizes power savings in mixed mono/stereo applications.

  • Output Short Circuit Protection
  • Stereo Class D Operation
  • No Output Filter Required
  • Logic Selectable Gain
  • Independent Shutdown Control
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving 2mm x 2mm x 0.6mm DSBGA, and 4mm x 4mm x 0.8mm WQFN Packages
  • Efficiency at 3.6V, 100mW into 8?: 80% (typ)
  • Efficiency at 3.6V, 500mW into 8?: 85% (typ)
  • Efficiency at 5V, 1W into 8?: 85% (typ)
  • Quiescent Power Supply Current
    at 3.6V supply: 4mA
  • Power Output at VDD = 5V,
    RL = 4?, THD = 10%: 2.5 W (typ)
  • Shutdown Current: 0.03µA (typ)
  • Детали

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    2.5×2@4Ohm W

    Totl_harmon_distortion_noise

    0.05@8Ohm@300mW %, 0.07@8Ohm@500mW

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    24 dB

    Min_cmrr

    67 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4674&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    75 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm