Audio Amp Speaker 1-CH Mono 2.5W Class-AB 8-Pin LLP EP T/R, LM4927SD/NOPB, Texas Instruments

The LM4927 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 2.5 watts of continuous average power to a 4? load with less than 10% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4927 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4927 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by logic low. Additionally, the LM4927 features an internal thermal shutdown protection mechanism. The LM4927 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.

  • Fully Differential Amplification
  • Available in Space-Saving Micro-Array WSON Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 100pF
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Improved PSRR at 217Hz, 85dB (Typ)
  • Power Output at 5.0V @ 10% THD (4?), 2.5W (Typ)
  • Power Output at 3.3V @ 1% THD, 550mW (Typ)
  • Shutdown Current, 0.1µA (Typ)
  • Характеристики

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    2.5×1@4Ohm W

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    0 dB

    Min_cmrr

    60 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4927&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    90 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.8 mm

    Артикул: LM4927SD/NOPB

    Описание

    The LM4927 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 2.5 watts of continuous average power to a 4? load with less than 10% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4927 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4927 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by logic low. Additionally, the LM4927 features an internal thermal shutdown protection mechanism. The LM4927 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.

  • Fully Differential Amplification
  • Available in Space-Saving Micro-Array WSON Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 100pF
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Improved PSRR at 217Hz, 85dB (Typ)
  • Power Output at 5.0V @ 10% THD (4?), 2.5W (Typ)
  • Power Output at 3.3V @ 1% THD, 550mW (Typ)
  • Shutdown Current, 0.1µA (Typ)
  • Детали

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    2.5×1@4Ohm W

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    0 dB

    Min_cmrr

    60 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4927&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    90 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.8 mm