Audio Amp Speaker 1-CH Mono 1.07W Class-AB 8-Pin LLP EP T/R, LM4907LQ/NOPB, Texas Instruments

The LM4907 is an audio power amplifier primarily designedfor demanding applications in mobile phones and other portablecommunication device applications. It is capable ofdelivering 1 Watt of continuous average power to an 8? BTLload with less than 1% distortion (THD+N) from a 5VDCpower supply.Boomer audio power amplifiers were designed specifically toprovide high quality output power with a minimal amount ofexternal components. The LM4907 does not require outputcoupling capacitors or bootstrap capacitors, and therefore isideally suited for mobile phone and other low voltage applicationswhere minimal power consumption is a primary requirement.The LM4907 features a low-power consumption shutdownmode which is achieved by driving the shutdown pin withlogic low. Additionally, the LM4907 features an internal thermalshutdown protection mechanism.The LM4907 contains advanced pop & click circuitry whicheliminates noise which would otherwise occur during turn-onand turn-off transitions.The LM4907 is unity-gain stable and can be configured byexternal gain-setting resistors.

  • Available in space-saving LLP package
  • Ultra low current shutdown mode
  • BTL output can drive capacitive loads
  • Improved pop & click circuitry eliminates noise during turn-on and turn-off transitions
  • 2.2 – 5.5V operation
  • No output coupling capacitors, snubber networks or bootstrap capacitors required
  • Unity-gain stable
  • External gain configuration capability

Характеристики

Бренд

Input_signal_type

Single

Power_supply_type

Single

Pin_count

8

Output_type

1-Channel Mono

Output_signal_type

Differential

Schedule_b

8542330000

Mounting

Surface Mount

Lead_finish

Matte Tin

Htsn

8542330001

Typical_psrr

64 dB

Функция

Speaker

Eccn

EAR99

Country_of_origin

United States

Specifications

http://www.ti.com/lit/ds/symlink/lm4907.pdf

Max_load_resistance

8 Ohm

Amplifier_type

Class-AB

Totl_harmon_distortion_noise

0.2@8Ohm@0.5W %

Typ_output_power_x_chan_load

1.07×1@8Ohm W

Product_dimensions

2 x 2 x 0.8 mm

Артикул: LM4907LQ/NOPB

Описание

The LM4907 is an audio power amplifier primarily designedfor demanding applications in mobile phones and other portablecommunication device applications. It is capable ofdelivering 1 Watt of continuous average power to an 8? BTLload with less than 1% distortion (THD+N) from a 5VDCpower supply.Boomer audio power amplifiers were designed specifically toprovide high quality output power with a minimal amount ofexternal components. The LM4907 does not require outputcoupling capacitors or bootstrap capacitors, and therefore isideally suited for mobile phone and other low voltage applicationswhere minimal power consumption is a primary requirement.The LM4907 features a low-power consumption shutdownmode which is achieved by driving the shutdown pin withlogic low. Additionally, the LM4907 features an internal thermalshutdown protection mechanism.The LM4907 contains advanced pop & click circuitry whicheliminates noise which would otherwise occur during turn-onand turn-off transitions.The LM4907 is unity-gain stable and can be configured byexternal gain-setting resistors.

  • Available in space-saving LLP package
  • Ultra low current shutdown mode
  • BTL output can drive capacitive loads
  • Improved pop & click circuitry eliminates noise during turn-on and turn-off transitions
  • 2.2 – 5.5V operation
  • No output coupling capacitors, snubber networks or bootstrap capacitors required
  • Unity-gain stable
  • External gain configuration capability

Детали

Бренд

Input_signal_type

Single

Power_supply_type

Single

Pin_count

8

Output_type

1-Channel Mono

Output_signal_type

Differential

Schedule_b

8542330000

Mounting

Surface Mount

Lead_finish

Matte Tin

Htsn

8542330001

Typical_psrr

64 dB

Функция

Speaker

Eccn

EAR99

Country_of_origin

United States

Specifications

http://www.ti.com/lit/ds/symlink/lm4907.pdf

Max_load_resistance

8 Ohm

Amplifier_type

Class-AB

Totl_harmon_distortion_noise

0.2@8Ohm@0.5W %

Typ_output_power_x_chan_load

1.07×1@8Ohm W

Product_dimensions

2 x 2 x 0.8 mm