Audio Amp Speaker 1-CH Mono 1.54W Class-AB 8-Pin LLP EP T/R, LM4941SD/NOPB, Texas Instruments

The LM4941 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to a 8? load with less than 1% distortion (THD+N) from a 5VDC power supply. The LM4941 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other small form factor applications where minimal PCB space is a primary requirement.The LM4941 also features proprietary internal circuitry that suppresses the coupling of RF signals into the chip. This is important because certain types of RF signals (such as GSM) can couple into audio amplifiers in such a way that part of the signal is heard through the speaker. The RF suppression circuitry in the LM4941 makes it well-suited for portable applications in which strong RF signals generated by an antenna from or a cellular phone or other portable electronic device may couple audibly into the amplifier. Other features include a low-power consumption shutdown mode, internal thermal shutdown protection, and advanced pop & click circuitry.

  • Improved RF Suppression, By Up to 20dB Over Previous Designs in Selected Applications
  • Fully Differential Amplification
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 100pF
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Improved PSRR at 217Hz 95dB (typ)
  • Power Output, VDD = 5.0V, RL = 8?, 1% THD+N 1.25W (typ)
  • Power Output, VDD = 3.0V, RL = 8?, 1% THD+N 430mW (typ)
  • Shutdown Current 0.1µA (typ)
  • Характеристики

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Single

    Pin_count

    8

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Matte Tin

    Htsn

    8542330001

    Typical_psrr

    95 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Malaysia

    Supplier_package

    LLP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4941&&fileType=pdf

    Min_cmrr

    70 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.04@8Ohm@0.7W %

    Typ_output_power_x_chan_load

    1.54×1@8Ohm W

    Product_dimensions

    2.5 x 3 x 0.8 mm

    Артикул: LM4941SD/NOPB

    Описание

    The LM4941 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to a 8? load with less than 1% distortion (THD+N) from a 5VDC power supply. The LM4941 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other small form factor applications where minimal PCB space is a primary requirement.The LM4941 also features proprietary internal circuitry that suppresses the coupling of RF signals into the chip. This is important because certain types of RF signals (such as GSM) can couple into audio amplifiers in such a way that part of the signal is heard through the speaker. The RF suppression circuitry in the LM4941 makes it well-suited for portable applications in which strong RF signals generated by an antenna from or a cellular phone or other portable electronic device may couple audibly into the amplifier. Other features include a low-power consumption shutdown mode, internal thermal shutdown protection, and advanced pop & click circuitry.

  • Improved RF Suppression, By Up to 20dB Over Previous Designs in Selected Applications
  • Fully Differential Amplification
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 100pF
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Improved PSRR at 217Hz 95dB (typ)
  • Power Output, VDD = 5.0V, RL = 8?, 1% THD+N 1.25W (typ)
  • Power Output, VDD = 3.0V, RL = 8?, 1% THD+N 430mW (typ)
  • Shutdown Current 0.1µA (typ)
  • Детали

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Single

    Pin_count

    8

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Matte Tin

    Htsn

    8542330001

    Typical_psrr

    95 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Malaysia

    Supplier_package

    LLP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4941&&fileType=pdf

    Min_cmrr

    70 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.04@8Ohm@0.7W %

    Typ_output_power_x_chan_load

    1.54×1@8Ohm W

    Product_dimensions

    2.5 x 3 x 0.8 mm