Audio Amp Speaker 1-CH Mono 1W Class-AB 10-Pin MSOP T/R, LM4898MM/NOPB, Texas Instruments

The LM4898 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4898 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4898 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown select pin to be driven in a likewise manner to enable Shutdown. Additionally, the LM4898 features an internal thermal shutdown protection mechanism. The LM4898 contains advanced pop and click circuitry which virtually eliminates noises which would otherwise occur during turn-on and turn-off transitions. 

  • Fully Differential Amplification
  • Available in Space-Saving Packages DSBGA, VSSOP, and WSON
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Shutdown High or Low Selectivity
  • Improved PSRR at 217Hz: 83 dB(typ)
  • Power Output at 5.0V, 1% THD: 1.0 W(typ)
  • Power Output at 3.3V, 1% THD: 400 mW(typ)
  • Shutdown Current: 0.1µA(typ)
  • Характеристики

    Бренд

    Typical_psrr

    90 dB

    Typ_output_power_x_chan_load

    1×1@8Ohm W

    Totl_harmon_distortion_noise

    0.05@8Ohm@400mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Min_cmrr

    50 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4898&&fileType=pdf

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    10

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.86 mm

    Артикул: LM4898MM/NOPB

    Описание

    The LM4898 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4898 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4898 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown select pin to be driven in a likewise manner to enable Shutdown. Additionally, the LM4898 features an internal thermal shutdown protection mechanism. The LM4898 contains advanced pop and click circuitry which virtually eliminates noises which would otherwise occur during turn-on and turn-off transitions. 

  • Fully Differential Amplification
  • Available in Space-Saving Packages DSBGA, VSSOP, and WSON
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.4 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Shutdown High or Low Selectivity
  • Improved PSRR at 217Hz: 83 dB(typ)
  • Power Output at 5.0V, 1% THD: 1.0 W(typ)
  • Power Output at 3.3V, 1% THD: 400 mW(typ)
  • Shutdown Current: 0.1µA(typ)
  • Детали

    Бренд

    Typical_psrr

    90 dB

    Typ_output_power_x_chan_load

    1×1@8Ohm W

    Totl_harmon_distortion_noise

    0.05@8Ohm@400mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Min_cmrr

    50 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4898&&fileType=pdf

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    10

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.86 mm