Audio Amp Speaker 2-CH Stereo 41.5W Class-AB 48-Pin HTQFP EP Tray, TAS5727PHP, Texas Instruments

The TAS5727 is a 25-W, efficient, digital-audio power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers. The TAS5727 is a slave-only device receiving all clocks from external sources. The TAS5727 operates with a PWM carrier between a 384-kHz switching rate and a 288-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

  • Audio Input/Output
    • 25 W Into an 😯 Load From a 20-V Supply
    • Wide PVDD Range, From 8 V to 26 V
    • Supports BTL Configuration With 4-O Load
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection Pin (Chip Select)
    • Single Output Filter PBTL Support
    • Supports 44.1-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
  • Audio/PWM Processing
    • Independent Channel Volume Controls With Gain of 24 dB to
      Mute With 0.125-dB Resolution Steps
    • Programmable Two-Band Dynamic-Range Control
    • 18 Programmable Biquads for Speaker EQ and Other
      Audio-Processing Features
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters
  • General Features
    • I2C Serial Control Interface
      Operational Without MCLK
    • Requires Only 3.3 V and PVDD
    • No External Oscillator: Internal Oscillator for Automatic
      Rate Detection
    • Surface-Mount, 48-Pin HTQFP Package
    • Thermal and Short-Circuit Protection
    • 106-dB SNR, A-Weighted
    • AD, BD, and Ternary Modulation
    • Up to 90% Efficient
    • PWM Level Meter to Measure the Digital Power Profile
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • Two-Band DRC: Dynamic Range Compression. Can Be Used
      As Power Limiter. Enables Speaker Protection,
      Easy Listening, Night-Mode Listening
    • Autodetect: Automatically Detects Sample-Rate Changes.
      No Need for External Microprocessor Intervention
  • APPLICATIONS
    • LCD TV, LED TV, Soundbar
  • Характеристики

    Бренд

    Typ_output_power_x_chan_load

    41.5×2@4Ohm W

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5727&&fileType=pdf

    Supplier_package

    HTQFP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    68@3.3V

    Operating_supply_voltage

    12, 15, 18, 24 V, 3.3, 9

    Operating_temperature

    0 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    48

    Power_supply_type

    Triple

    Product_dimensions

    7 x 7 x 1 mm

    SKU: TAS5727PHP

    Description

    The TAS5727 is a 25-W, efficient, digital-audio power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers. The TAS5727 is a slave-only device receiving all clocks from external sources. The TAS5727 operates with a PWM carrier between a 384-kHz switching rate and a 288-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

  • Audio Input/Output
    • 25 W Into an 😯 Load From a 20-V Supply
    • Wide PVDD Range, From 8 V to 26 V
    • Supports BTL Configuration With 4-O Load
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection Pin (Chip Select)
    • Single Output Filter PBTL Support
    • Supports 44.1-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
  • Audio/PWM Processing
    • Independent Channel Volume Controls With Gain of 24 dB to
      Mute With 0.125-dB Resolution Steps
    • Programmable Two-Band Dynamic-Range Control
    • 18 Programmable Biquads for Speaker EQ and Other
      Audio-Processing Features
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters
  • General Features
    • I2C Serial Control Interface
      Operational Without MCLK
    • Requires Only 3.3 V and PVDD
    • No External Oscillator: Internal Oscillator for Automatic
      Rate Detection
    • Surface-Mount, 48-Pin HTQFP Package
    • Thermal and Short-Circuit Protection
    • 106-dB SNR, A-Weighted
    • AD, BD, and Ternary Modulation
    • Up to 90% Efficient
    • PWM Level Meter to Measure the Digital Power Profile
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • Two-Band DRC: Dynamic Range Compression. Can Be Used
      As Power Limiter. Enables Speaker Protection,
      Easy Listening, Night-Mode Listening
    • Autodetect: Automatically Detects Sample-Rate Changes.
      No Need for External Microprocessor Intervention
  • APPLICATIONS
    • LCD TV, LED TV, Soundbar
  • Additional information

    Бренд

    Typ_output_power_x_chan_load

    41.5×2@4Ohm W

    Totl_harmon_distortion_noise

    0.03@8Ohm@1W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5727&&fileType=pdf

    Supplier_package

    HTQFP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    68@3.3V

    Operating_supply_voltage

    12, 15, 18, 24 V, 3.3, 9

    Operating_temperature

    0 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    48

    Power_supply_type

    Triple

    Product_dimensions

    7 x 7 x 1 mm