Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

Analog Switch Dual SPDT 10-Pin UQFN T/R, TS3USB30ERSWR, Texas Instruments

The TS3USB30E is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny µQFN package (1.8 mm × 1.4 mm), a DGS package, and is characterized over the free air temperature range of –40°C to 85°C.

  • VCC Operation at 3 V to 4.3 V
  • 1.8-V Compatible Control-Pin Inputs
  • IOFF Supports Partial Power-Down-Mode Operation
    • D+/D– Pins Tolerate up to 5.25V
  • rON = 10 O Max
  • ?ON = 0.35 O Typ
  • Cio(ON) = 7.5 pF Typ
  • Low Power Consumption (1 µA Max)
  • –3 dB Bandwidth = 900 MHz Typ
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II(1)
  • ESD Performance Tested Per JESD 22
  • 8000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
  • ESD Performance I/O Port to GND(2)
  • 15000-V Human-Body Model
  • Packaged in 10-pin TQFN (1.4 mm × 1.8 mm)

    • Характеристики

    Бренд

    Polarity

    Non-Inverting
    Number_of_channels_per_chip

    2
    Supplier_package

    UQFN
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3USB30E&&fileType=pdf
    Schedule_b

    8542390000
    Propagat_delay_test_condit

    5 pF
    Product_dimensions

    1.8 x 1.4 x 0.45 mm
    Msl_level

    1
    Power_supply_type

    Single
    Pin_count

    10
    Output_signal_type

    Differential
    Operating_temp

    -40 to 85 °C
    Operating_supply_voltage

    3 V, 4.3
    Operating_supply_current

    0.001@4.3V@-40C to 85C mA
    Number_of_outputs_per_chip

    4
    Number_of_inputs_per_chip

    2
    Конфигурация

    Dual SPDT
    Mounting

    Surface Mount
    Max_propagation_delay_btb

    0.25@3.3@-40C to 85C ns
    Max_processing_temp

    260
    Max_on_resistance_range

    10 to 25 Ohm
    Max_on_resistance

    10@3V Ohm
    Max_low_lev_output_current

    64 mA
    Max_high_lev_output_current

    64 mA
    Max_data_rate

    480 Mbps
    Chip_enable_signals

    Yes
    Lead_finish

    Gold
    Kind

    Analog Switch
    Input_signal_type

    Single
    Htsn

    8542390001
    Eccn

    EAR99
    Country_of_origin

    China
    Max_turn_on_time

    30@3.3V@-40C to 85C ns
    Артикул: TS3USB30ERSWR

    Описание

    The TS3USB30E is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny µQFN package (1.8 mm × 1.4 mm), a DGS package, and is characterized over the free air temperature range of –40°C to 85°C.

  • VCC Operation at 3 V to 4.3 V
  • 1.8-V Compatible Control-Pin Inputs
  • IOFF Supports Partial Power-Down-Mode Operation
    • D+/D– Pins Tolerate up to 5.25V
  • rON = 10 O Max
  • ?ON = 0.35 O Typ
  • Cio(ON) = 7.5 pF Typ
  • Low Power Consumption (1 µA Max)
  • –3 dB Bandwidth = 900 MHz Typ
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II(1)
  • ESD Performance Tested Per JESD 22
  • 8000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
  • ESD Performance I/O Port to GND(2)
  • 15000-V Human-Body Model
  • Packaged in 10-pin TQFN (1.4 mm × 1.8 mm)

    • Детали

    Бренд

    Polarity

    Non-Inverting
    Number_of_channels_per_chip

    2
    Supplier_package

    UQFN
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3USB30E&&fileType=pdf
    Schedule_b

    8542390000
    Propagat_delay_test_condit

    5 pF
    Product_dimensions

    1.8 x 1.4 x 0.45 mm
    Msl_level

    1
    Power_supply_type

    Single
    Pin_count

    10
    Output_signal_type

    Differential
    Operating_temp

    -40 to 85 °C
    Operating_supply_voltage

    3 V, 4.3
    Operating_supply_current

    0.001@4.3V@-40C to 85C mA
    Number_of_outputs_per_chip

    4
    Number_of_inputs_per_chip

    2
    Конфигурация

    Dual SPDT
    Mounting

    Surface Mount
    Max_propagation_delay_btb

    0.25@3.3@-40C to 85C ns
    Max_processing_temp

    260
    Max_on_resistance_range

    10 to 25 Ohm
    Max_on_resistance

    10@3V Ohm
    Max_low_lev_output_current

    64 mA
    Max_high_lev_output_current

    64 mA
    Max_data_rate

    480 Mbps
    Chip_enable_signals

    Yes
    Lead_finish

    Gold
    Kind

    Analog Switch
    Input_signal_type

    Single
    Htsn

    8542390001
    Eccn

    EAR99
    Country_of_origin

    China
    Max_turn_on_time

    30@3.3V@-40C to 85C ns

    Похожие товары