Analog Multiplexer Single 8:1 16-Pin TSSOP T/R, NX3L4051PW-Q100J, NXP

Описание

The NX3L4051-Q100 is a low-ohmic 8-channel analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. The NX3L4051-Q100 has three digital select inputs (S1 to S3), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eight switches share an enable input (E). A HIGH on E causes all switches into the high impedance OFF-state, independent of Sn. Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L4051-Q100 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L4051-Q100 allows signals with amplitude up to VCC to be transmitted from Z to Yn or from Yn to Z. The low ON resistance (0.5 O) and flatness (0.13 O), ensures minimal attenuation and distortion of transmitted signals. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
• Wide supply voltage range from 1.4 V to 4.3 V
• Very low ON resistance (peak):
  • 1.7 O (typical) at V_CC = 1.4 V
  • 1.0 O (typical) at V_CC = 1.65 V
  • 0.6 O (typical) at V_CC = 2.3 V
  • 0.5 O (typical) at V_CC = 2.7 V
  • 0.5 O (typical) at V_CC = 4.3 V
• Break-before-make switching
• High noise immunity
• ESD protection:
  • MIL-STD-883, method 3015 Class 3A exceeds 7500 V
  • HBM JESD22-A114F Class 3A exceeds 7500 V
  • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 O)
  • CDM AEC-Q100-011 revision B exceeds 1000 V
  • IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
• CMOS low-power consumption
• Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
• 1.8 V control logic at V_CC = 3.6 V
• Control input accepts voltages above supply voltage
• Very low supply current, even when input is below V_CC
• High current handling capability (350 mA continuous current under 3.3 V supply)