Analog Multiplexer Quint 2:1 56-Pin WQFN EP T/R, TS3DV520RHUR, Texas Instruments

The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching. This device can also be used to replace mechanical relays in LAN applications and allows for signals to be routed from a 10/100/1000 Base-T transceiver to the RJ-45 connectors in laptops or docking stations.This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

  • Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface
    • Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ)
    • 165-MHz Speed Operation
    • Serial Data Stream at 10× Pixel Clock Rate
    • Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz)
    • Total Raw Capacity 4.95 Gbps (Single Link)
    • HDCP Compatible
  • Low Crosstalk (XTALK = –41 dB Typ)
  • Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
  • Low and Flat ON-State Resistance
    (ron = 6 O Max, ron(flat) = 0.5 O Typ)
  • Low Input/Output Capacitance
    (CON = 7.8 pF Typ)
  • Rail-to-Rail Switching on Data I/O Ports (0 to 5 V)
  • VCC Operating Range From 3 V to 3.6 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • APPLICATIONS
    • DVI/HDMI Signal Switching
    • Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers
      and High-Definition Televisions (HDTVs)
    • 10/100/1000 Base-T Signal Switching
    • Hub and Router Signal Switching
  • Характеристики

    Бренд

    Chip_enable_signals

    No

    Max_on_resistance

    6@3V Ohm

    Number_of_channels_per_chip

    5

    Number_of_outputs_per_chip

    20

    Max_turn_on_time

    15@3.3V@-40C to 85C ns

    Output_signal_type

    Differential

    Max_data_rate

    2400 Mbps

    Power_supply_type

    Single

    Max_propagation_delay_btb

    0.25@3.3 ns

    Propagat_delay_test_condit

    10 pF

    Max_low_lev_output_current

    128 mA

    Max_on_resist_range

    5 to 10 Ohm

    Number_of_inputs_per_chip

    10

    Max_high_lev_output_current

    128 mA

    Msl_level

    1

    Конфигурация

    Quint 2:1

    Country_of_origin

    Thailand

    Eccn

    EAR99

    Htsn

    8542390001

    Input_signal_type

    Differential

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    0.5@3.3V

    Operat_supply_voltage

    3 V, 3.6

    Operat_temperature

    -40 to 85 °C

    Pin_count

    56

    Product_dimensions

    11 x 5 x 0.75 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3DV520&&fileType=pdf

    Supplier_package

    WQFN EP

    Артикул: TS3DV520RHUR

    Описание

    The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching. This device can also be used to replace mechanical relays in LAN applications and allows for signals to be routed from a 10/100/1000 Base-T transceiver to the RJ-45 connectors in laptops or docking stations.This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

  • Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface
    • Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ)
    • 165-MHz Speed Operation
    • Serial Data Stream at 10× Pixel Clock Rate
    • Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz)
    • Total Raw Capacity 4.95 Gbps (Single Link)
    • HDCP Compatible
  • Low Crosstalk (XTALK = –41 dB Typ)
  • Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
  • Low and Flat ON-State Resistance
    (ron = 6 O Max, ron(flat) = 0.5 O Typ)
  • Low Input/Output Capacitance
    (CON = 7.8 pF Typ)
  • Rail-to-Rail Switching on Data I/O Ports (0 to 5 V)
  • VCC Operating Range From 3 V to 3.6 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
  • APPLICATIONS
    • DVI/HDMI Signal Switching
    • Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers
      and High-Definition Televisions (HDTVs)
    • 10/100/1000 Base-T Signal Switching
    • Hub and Router Signal Switching
  • Детали

    Бренд

    Chip_enable_signals

    No

    Max_on_resistance

    6@3V Ohm

    Number_of_channels_per_chip

    5

    Number_of_outputs_per_chip

    20

    Max_turn_on_time

    15@3.3V@-40C to 85C ns

    Output_signal_type

    Differential

    Max_data_rate

    2400 Mbps

    Power_supply_type

    Single

    Max_propagation_delay_btb

    0.25@3.3 ns

    Propagat_delay_test_condit

    10 pF

    Max_low_lev_output_current

    128 mA

    Max_on_resist_range

    5 to 10 Ohm

    Number_of_inputs_per_chip

    10

    Max_high_lev_output_current

    128 mA

    Msl_level

    1

    Конфигурация

    Quint 2:1

    Country_of_origin

    Thailand

    Eccn

    EAR99

    Htsn

    8542390001

    Input_signal_type

    Differential

    Kind

    Analog Multiplexer

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operat_supply_current

    0.5@3.3V

    Operat_supply_voltage

    3 V, 3.6

    Operat_temperature

    -40 to 85 °C

    Pin_count

    56

    Product_dimensions

    11 x 5 x 0.75 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TS3DV520&&fileType=pdf

    Supplier_package

    WQFN EP