ADC Single Delta-Sigma 4ksps 31-bit Serial 24-Pin TSSOP Tube, ADS1281IPW, Texas Instruments

The ADS1281 is an extremely high-performance, single-chip analog-to-digital converter (ADC) designed for the demanding needs of energy exploration and seismic monitoring environments. The single-chip design promotes board area savings for improvements in high-density applications. The converter uses a fourth-order, inherently stable, delta-sigma (?S) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post-processing filters. The digital filter consists of sinc and finite impulse response (FIR) low-pass stages followed by an infinite impulse response (IIR) high-pass filter (HPF) stage. Selectable decimation provides data rates from 250 to 4000 samples per second (SPS). The FIR low-pass stage provides both linear and minimum phase response. The HPF features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1281s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the modulator and filter dissipate only 12mW. The ADS1281 is available in a compact TSSOP-24 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.

  • High Resolution:
    • 130dB SNR (250SPS)
    • 127dB SNR (500SPS)
  • High Accuracy:
    • THD: –122dB (typ), –115dB (max)
    • INL: 0.6ppm
  • Inherently Stable Modulator with Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      • 250SPS to 4kSPS
  • Filter Bypass Option
  • Low Power Consumption:
    • Operating: 12mW
    • Shutdown: 10µW
  • Calibration Engine for Offset and
    Gain Correction
  • SYNC Input
  • Analog Supply:
    • Unipolar (+5V) or Bipolar (±2.5V)
  • Digital Supply: 1.8V to 3.3V
  • APPLICATIONS
    • Energy Exploration
    • Seismic Monitoring
    • High-Accuracy Instrumentation
  • Характеристики

    Number_of_analog_inputs

    1

    Eccn

    EAR99

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    31 Bit

    Typical_power_dissipation

    12 mW

    Differential_nonlinearity

    1 LSB

    Бренд

    Country_of_origin

    Taiwan

    Volt_reference

    External

    Lead_finish

    Gold

    Htsn

    8542390001

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    24

    Product_dimensions

    7.9 x 4.5 x 1.05 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1281&&fileType=pdf

    Operating_supply_volt

    -2.6/2.65, ±2.5, 4.75, 5 V, 5.25

    Number_of_adcs

    1

    Артикул: ADS1281IPW

    Описание

    The ADS1281 is an extremely high-performance, single-chip analog-to-digital converter (ADC) designed for the demanding needs of energy exploration and seismic monitoring environments. The single-chip design promotes board area savings for improvements in high-density applications. The converter uses a fourth-order, inherently stable, delta-sigma (?S) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post-processing filters. The digital filter consists of sinc and finite impulse response (FIR) low-pass stages followed by an infinite impulse response (IIR) high-pass filter (HPF) stage. Selectable decimation provides data rates from 250 to 4000 samples per second (SPS). The FIR low-pass stage provides both linear and minimum phase response. The HPF features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1281s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the modulator and filter dissipate only 12mW. The ADS1281 is available in a compact TSSOP-24 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.

  • High Resolution:
    • 130dB SNR (250SPS)
    • 127dB SNR (500SPS)
  • High Accuracy:
    • THD: –122dB (typ), –115dB (max)
    • INL: 0.6ppm
  • Inherently Stable Modulator with Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      • 250SPS to 4kSPS
  • Filter Bypass Option
  • Low Power Consumption:
    • Operating: 12mW
    • Shutdown: 10µW
  • Calibration Engine for Offset and
    Gain Correction
  • SYNC Input
  • Analog Supply:
    • Unipolar (+5V) or Bipolar (±2.5V)
  • Digital Supply: 1.8V to 3.3V
  • APPLICATIONS
    • Energy Exploration
    • Seismic Monitoring
    • High-Accuracy Instrumentation
  • Детали

    Number_of_analog_inputs

    1

    Eccn

    EAR99

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    31 Bit

    Typical_power_dissipation

    12 mW

    Differential_nonlinearity

    1 LSB

    Бренд

    Country_of_origin

    Taiwan

    Volt_reference

    External

    Lead_finish

    Gold

    Htsn

    8542390001

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    24

    Product_dimensions

    7.9 x 4.5 x 1.05 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1281&&fileType=pdf

    Operating_supply_volt

    -2.6/2.65, ±2.5, 4.75, 5 V, 5.25

    Number_of_adcs

    1