ADC Quad Delta-Sigma 2ksps 16-bit Serial 16-Pin TSSOP Tube, ADS1120IPW, Texas Instruments

The ADS1120 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, a low-side switch, and a precision temperature sensor. The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128 V/V. This PGA makes the ADS1120 ideally-suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and bridge sensors. The device supports measurements of pseudo- or fully-differential signals when using the PGA. Alternatively, the device can be configured to bypass the internal PGA while still providing high input impedance and gains up to 4 V/V, allowing for single-ended measurements. Power consumption is as low as 120 µA when operating in duty-cycle mode with the PGA disabled. The ADS1120 is offered in a leadless VQFN-16 or a TSSOP-16 package and is specified over a temperature range of –40°C to +125°C.

  • Low Current Consumption:
    As Low as 120 µA (typ) in Duty-Cycle Mode
  • Wide Supply Range: 2.3 V to 5.5 V
  • Programmable Gain: 1 V/V to 128 V/V
  • Programmable Data Rates: Up to 2 kSPS
  • 16-Bit Noise-Free Resolution at 20 SPS
  • Simultaneous 50-Hz and 60-Hz Rejection at
    20 SPS with Single-Cycle Settling Digital Filter
  • Two Differential or Four Single-Ended Inputs
  • Dual-Matched Programmable Current Sources:
    50 µA to 1.5 mA
  • Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
  • Internal 2% Accurate Oscillator
  • Internal Temperature Sensor:
    0.5°C (typ) Accuracy
  • SPI™-Compatible Interface (Mode 1)
  • Package: 3.5-mm × 3.5-mm × 0.9-mm VQFN
  • Характеристики

    Volt_supply_source

    Analog, Digital

    Number_of_analog_inputs

    2, 4

    Sampling_rate

    2 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    2.1 mW

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Бренд

    Msl_level

    2

    Country_of_origin

    Malaysia

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold Over Nickel Palladium

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 125 °C

    Pin_count

    16

    Product_dimensions

    5.1(Max) x 4.5(Max) x 1.05(Max)

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1120&&fileType=pdf

    Supplier_package

    TSSOP

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    ±2.3, ±2.5 V, ±2.75, 2.3, 5.5

    Number_of_adcs

    4

    Digital_interface_type

    Serial (SPI)

    Артикул: ADS1120IPW

    Описание

    The ADS1120 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, a low-side switch, and a precision temperature sensor. The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128 V/V. This PGA makes the ADS1120 ideally-suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and bridge sensors. The device supports measurements of pseudo- or fully-differential signals when using the PGA. Alternatively, the device can be configured to bypass the internal PGA while still providing high input impedance and gains up to 4 V/V, allowing for single-ended measurements. Power consumption is as low as 120 µA when operating in duty-cycle mode with the PGA disabled. The ADS1120 is offered in a leadless VQFN-16 or a TSSOP-16 package and is specified over a temperature range of –40°C to +125°C.

  • Low Current Consumption:
    As Low as 120 µA (typ) in Duty-Cycle Mode
  • Wide Supply Range: 2.3 V to 5.5 V
  • Programmable Gain: 1 V/V to 128 V/V
  • Programmable Data Rates: Up to 2 kSPS
  • 16-Bit Noise-Free Resolution at 20 SPS
  • Simultaneous 50-Hz and 60-Hz Rejection at
    20 SPS with Single-Cycle Settling Digital Filter
  • Two Differential or Four Single-Ended Inputs
  • Dual-Matched Programmable Current Sources:
    50 µA to 1.5 mA
  • Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
  • Internal 2% Accurate Oscillator
  • Internal Temperature Sensor:
    0.5°C (typ) Accuracy
  • SPI™-Compatible Interface (Mode 1)
  • Package: 3.5-mm × 3.5-mm × 0.9-mm VQFN
  • Детали

    Volt_supply_source

    Analog, Digital

    Number_of_analog_inputs

    2, 4

    Sampling_rate

    2 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Delta-Sigma

    Resolution

    16 Bit

    Typical_power_dissipation

    2.1 mW

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Бренд

    Msl_level

    2

    Country_of_origin

    Malaysia

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold Over Nickel Palladium

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 125 °C

    Pin_count

    16

    Product_dimensions

    5.1(Max) x 4.5(Max) x 1.05(Max)

    Schedule_b

    8542390000

    Screening_level

    Extended Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS1120&&fileType=pdf

    Supplier_package

    TSSOP

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    ±2.3, ±2.5 V, ±2.75, 2.3, 5.5

    Number_of_adcs

    4

    Digital_interface_type

    Serial (SPI)