ADC Single SAR 40ksps 16-bit Serial 16-Pin SOIC Tube, ADS8513IDW, Texas Instruments

The ADS8513 is a complete low-power, single 5V supply, 16-bit sampling analog-to-digital (A/D) converter. It contains a complete 16-bit capacitor-based, successive approximation register (SAR) A/D converter with sample and hold, clock, reference, and serial data interface. The converter can be configured for a variety of input ranges including ±10 V, ±5V, 0V to 10V, and 0.5V to 4.5V. A high-impedance, 0.3V to 2.8V input is also available with input impedance greater than 10MO. For most input ranges, the input voltage can swing to 25V or -25V without damage to the converter.AnSPI-compatible serial interface allows data to be synchronized to an internal or external clock. The ADS8513 is specified at 40kSPS sampling rate over the industrial -40°C to +85°C temperature range.

  • 40kSPS Min SamplingRate
  • Very Low Power: 24mW Typ
  • ±3.33V, ±5V, ±10V, 4V, and 10V Input Ranges
  • 89dB SNR with 10kHz Input
  • ±2LSB Max INL
  • -1/+2LSB Max DNL, 16-Bit NMC
  • ±10mV BPZ, ±2.5ppm/°C BPZ Drift
  • 89dB Min SINAD, 102dB Min SFDR
  • Uses Internal or External 2.5-V Reference
  • No External Calibration Resistors Required
  • Single 5V Analog Supply
    • 32.5W Max Power Dissipation
    • 50µW Max Power-Down Mode
  • SPI™-Compatible Serial Port up to 20MHz Master/Slave Feature
  • Global CONV and 3-Stated Bus for Multi-Chip Simultaneous S/H Operation
  • Pin-Compatible With 16-Bit ADS7813 and 12-Bit ADS7812 and ADS8512
  • SO-16 Package
  • APPLICATIONS
    • Industrial Process Control
    • Test Equipment
    • Robotics
    • DSP Servo Control
    • Medical Instrumentation
    • Portable Data Acquisition Systems
  • Характеристики

    Volt_supply_source

    Single

    Number_of_analog_inputs

    3

    Sampling_rate

    40 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    No

    Architecture

    SAR

    Resolution

    16 Bit

    Typical_power_dissipation

    24 mW

    Differential_nonlinearity

    -2, 3 LSB

    Signal_to_noise_ratio

    89 dB

    Input_type

    Voltage

    Input_signal_type

    Single-Ended

    Input_volt

    ±10 V, ±3.33, ±5, 10, 4

    Бренд

    Msl_level

    2

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    32.5 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    16

    Product_dimensions

    10.28 x 7.52 x 2.35 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS8513&&fileType=pdf

    Supplier_package

    SOIC

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    1

    Digital_interface_type

    Serial (SPI, QSPI)

    Артикул: ADS8513IDW

    Описание

    The ADS8513 is a complete low-power, single 5V supply, 16-bit sampling analog-to-digital (A/D) converter. It contains a complete 16-bit capacitor-based, successive approximation register (SAR) A/D converter with sample and hold, clock, reference, and serial data interface. The converter can be configured for a variety of input ranges including ±10 V, ±5V, 0V to 10V, and 0.5V to 4.5V. A high-impedance, 0.3V to 2.8V input is also available with input impedance greater than 10MO. For most input ranges, the input voltage can swing to 25V or -25V without damage to the converter.AnSPI-compatible serial interface allows data to be synchronized to an internal or external clock. The ADS8513 is specified at 40kSPS sampling rate over the industrial -40°C to +85°C temperature range.

  • 40kSPS Min SamplingRate
  • Very Low Power: 24mW Typ
  • ±3.33V, ±5V, ±10V, 4V, and 10V Input Ranges
  • 89dB SNR with 10kHz Input
  • ±2LSB Max INL
  • -1/+2LSB Max DNL, 16-Bit NMC
  • ±10mV BPZ, ±2.5ppm/°C BPZ Drift
  • 89dB Min SINAD, 102dB Min SFDR
  • Uses Internal or External 2.5-V Reference
  • No External Calibration Resistors Required
  • Single 5V Analog Supply
    • 32.5W Max Power Dissipation
    • 50µW Max Power-Down Mode
  • SPI™-Compatible Serial Port up to 20MHz Master/Slave Feature
  • Global CONV and 3-Stated Bus for Multi-Chip Simultaneous S/H Operation
  • Pin-Compatible With 16-Bit ADS7813 and 12-Bit ADS7812 and ADS8512
  • SO-16 Package
  • APPLICATIONS
    • Industrial Process Control
    • Test Equipment
    • Robotics
    • DSP Servo Control
    • Medical Instrumentation
    • Portable Data Acquisition Systems
  • Детали

    Volt_supply_source

    Single

    Number_of_analog_inputs

    3

    Sampling_rate

    40 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    No

    Architecture

    SAR

    Resolution

    16 Bit

    Typical_power_dissipation

    24 mW

    Differential_nonlinearity

    -2, 3 LSB

    Signal_to_noise_ratio

    89 dB

    Input_type

    Voltage

    Input_signal_type

    Single-Ended

    Input_volt

    ±10 V, ±3.33, ±5, 10, 4

    Бренд

    Msl_level

    2

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Gold

    Max_power_dissipation

    32.5 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    16

    Product_dimensions

    10.28 x 7.52 x 2.35 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADS8513&&fileType=pdf

    Supplier_package

    SOIC

    Polarity_of_input_volt

    Bipolar, Unipolar

    Operating_supply_volt

    4.75, 5 V, 5.25

    Number_of_adcs

    1

    Digital_interface_type

    Serial (SPI, QSPI)