ADC Single 114ksps 12-bit+Sign Parallel 44-Pin PLCC Rail, LM12458CIV, Texas Instruments

The LM12458, and LM12H458 are highly integrated Data Acquisition Systems. Operating on just 5V, they combine a fully-differential self-calibrating (correcting linearity and zero errors) 13-bit (12-bit + sign) analog-to-digital converter (ADC) and sample-and-hold (S/H) with extensive analog functions and digital functionality. Up to 32 consecutive conversions, using two"s complement format, can be stored in an internal 32-word (16-bit wide) FIFO data buffer. An internal 8-word RAM can store the conversion sequence for up to eight acquisitions through the LM12(H)458"s eight-input multiplexer. The obsolete LM12454 has a four-channel multiplexer, a differential multiplexer output, and a differential S/H input. The LM12(H)458 can also operate with 8-bit + sign resolution and in a supervisory “watchdog” mode that compares an input signal against two programmable limits. Programmable acquisition times and conversion rates are possible through the use of internal clock-driven timers. The reference voltage input can be externally generated for absolute or ratiometric operation or can be derived using the internal 2.5V bandgap reference. All registers, RAM, and FIFO are directly addressable through the high speed microprocessor interface to either an 8-bit or 16-bit data bus. The LM12(H)458 includes a direct memory access (DMA) interface for high-speed conversion data transfer.

  • Three operating modes: 12-bit + sign, 8-bit + sign, and “watchdog”
  • Single-ended or differential inputs
  • Built-in Sample-and-Hold and 2.5V bandgap reference
  • Instruction RAM and event sequencer
  • 8-channel multiplexer
  • 32-word conversion FIFO
  • Programmable acquisition times and conversion rates
  • Self-calibration and diagnostic mode
  • 8- or 16-bit wide data bus microprocessor or DSP interface
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8, 4

    Sampling_rate

    114 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Resolution

    12+Sign Bit

    Differential_nonlinearity

    0.75 LSB

    Signal_to_noise_ratio

    77.5 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±5 V

    Бренд

    Msl_level

    2A

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Tin/Lead

    Max_processing_temp

    220

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    44

    Product_dimensions

    16.51 x 16.51 x 3.68 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM12454&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel

    Артикул: LM12458CIV

    Описание

    The LM12458, and LM12H458 are highly integrated Data Acquisition Systems. Operating on just 5V, they combine a fully-differential self-calibrating (correcting linearity and zero errors) 13-bit (12-bit + sign) analog-to-digital converter (ADC) and sample-and-hold (S/H) with extensive analog functions and digital functionality. Up to 32 consecutive conversions, using two"s complement format, can be stored in an internal 32-word (16-bit wide) FIFO data buffer. An internal 8-word RAM can store the conversion sequence for up to eight acquisitions through the LM12(H)458"s eight-input multiplexer. The obsolete LM12454 has a four-channel multiplexer, a differential multiplexer output, and a differential S/H input. The LM12(H)458 can also operate with 8-bit + sign resolution and in a supervisory “watchdog” mode that compares an input signal against two programmable limits. Programmable acquisition times and conversion rates are possible through the use of internal clock-driven timers. The reference voltage input can be externally generated for absolute or ratiometric operation or can be derived using the internal 2.5V bandgap reference. All registers, RAM, and FIFO are directly addressable through the high speed microprocessor interface to either an 8-bit or 16-bit data bus. The LM12(H)458 includes a direct memory access (DMA) interface for high-speed conversion data transfer.

  • Three operating modes: 12-bit + sign, 8-bit + sign, and “watchdog”
  • Single-ended or differential inputs
  • Built-in Sample-and-Hold and 2.5V bandgap reference
  • Instruction RAM and event sequencer
  • 8-channel multiplexer
  • 32-word conversion FIFO
  • Programmable acquisition times and conversion rates
  • Self-calibration and diagnostic mode
  • 8- or 16-bit wide data bus microprocessor or DSP interface
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8, 4

    Sampling_rate

    114 ksps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Resolution

    12+Sign Bit

    Differential_nonlinearity

    0.75 LSB

    Signal_to_noise_ratio

    77.5 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±5 V

    Бренд

    Msl_level

    2A

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Tin/Lead

    Max_processing_temp

    220

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    44

    Product_dimensions

    16.51 x 16.51 x 3.68 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM12454&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 5 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel