ADC Single 114ksps 12-bit+Sign Parallel 44-Pin PLCC Rail, LM12L458CIV, Texas Instruments

The LM12L458 is a highly integrated 3.3V Data Acquisition System. It combines a fully-differential self-calibrating (correcting linearity and zero errors) 13-bit (12-bit + sign) analog-to-digital converter (ADC) and sample-and-hold (S/H) with extensive analog functions and digital functionality. Up to 32 consecutive conversions, using two"s complement format, can be stored in an internal 32-word (16-bit wide) FIFO data buffer. An internal 8-word RAM can store the conversion sequence for up to eight acquisitions through the LM12L458"s eight-input multiplexer. The LM12L458 can also operate with 8-bit + sign resolution and in a supervisory “watchdog” mode that compares an input signal against two programmable limits. Programmable acquisition times and conversion rates are possible through the use of internal clock-driven timers.All registers, RAM, and FIFO are directly addressable through the high speed microprocessor interface to either an 8-bit or 16-bit data bus. The LM12L458 includes a direct memory access (DMA) interface for high-speed conversion data transfer. 

  • Three Operating Modes: 12-Bit + Sign, 8-Bit + Sign, and “Watchdog”
  • Single-Ended or Differential Inputs
  • Built-In Sample-and-Hold
  • Instruction RAM and Event Sequencer
  • 8-Channel Multiplexer
  • 32-Word Conversion FIFO
  • Programmable Acquisition Times and Conversion Rates
  • Self-Calibration and Diagnostic Mode
  • 8- or 16-Bit Wide Data Bus Microprocessor or DSP Interface
  • CMOS Compatible I/O
  • (fCLK = 6 MHz)
  • Resolution: 12-Bit + Sign or 8-Bit + Sign
  • Single Supply: +3 to +5.5 V
  • 13-bit Conversion Time: 7.3 µs
  • 9-bit Conversion Time: 3.5 µs
  • 13-bit Through-Put Rate: 106 k Samples/s (Min)
  • Comparison Time (“Watchdog” Mode): 1.8 µs (Max)
  • ILE: ±1 LSB (Max)
  • Power Consumption: 15 mW (max)
  • Stand-By Mode: 5 µW (typ)
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8, 4

    Sampling_rate

    114 ksps

    Volt_reference

    External

    Digital_supply_support

    Yes

    Resolution

    12+Sign Bit

    Differential_nonlinearity

    1 LSB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±3.3 V

    Бренд

    Msl_level

    2A

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Tin/Lead

    Max_power_dissipation

    15 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    44

    Product_dimensions

    16.51 x 16.51 x 3.68 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM12L458&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 3.3 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel

    Артикул: LM12L458CIV

    Описание

    The LM12L458 is a highly integrated 3.3V Data Acquisition System. It combines a fully-differential self-calibrating (correcting linearity and zero errors) 13-bit (12-bit + sign) analog-to-digital converter (ADC) and sample-and-hold (S/H) with extensive analog functions and digital functionality. Up to 32 consecutive conversions, using two"s complement format, can be stored in an internal 32-word (16-bit wide) FIFO data buffer. An internal 8-word RAM can store the conversion sequence for up to eight acquisitions through the LM12L458"s eight-input multiplexer. The LM12L458 can also operate with 8-bit + sign resolution and in a supervisory “watchdog” mode that compares an input signal against two programmable limits. Programmable acquisition times and conversion rates are possible through the use of internal clock-driven timers.All registers, RAM, and FIFO are directly addressable through the high speed microprocessor interface to either an 8-bit or 16-bit data bus. The LM12L458 includes a direct memory access (DMA) interface for high-speed conversion data transfer. 

  • Three Operating Modes: 12-Bit + Sign, 8-Bit + Sign, and “Watchdog”
  • Single-Ended or Differential Inputs
  • Built-In Sample-and-Hold
  • Instruction RAM and Event Sequencer
  • 8-Channel Multiplexer
  • 32-Word Conversion FIFO
  • Programmable Acquisition Times and Conversion Rates
  • Self-Calibration and Diagnostic Mode
  • 8- or 16-Bit Wide Data Bus Microprocessor or DSP Interface
  • CMOS Compatible I/O
  • (fCLK = 6 MHz)
  • Resolution: 12-Bit + Sign or 8-Bit + Sign
  • Single Supply: +3 to +5.5 V
  • 13-bit Conversion Time: 7.3 µs
  • 9-bit Conversion Time: 3.5 µs
  • 13-bit Through-Put Rate: 106 k Samples/s (Min)
  • Comparison Time (“Watchdog” Mode): 1.8 µs (Max)
  • ILE: ±1 LSB (Max)
  • Power Consumption: 15 mW (max)
  • Stand-By Mode: 5 µW (typ)
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    8, 4

    Sampling_rate

    114 ksps

    Volt_reference

    External

    Digital_supply_support

    Yes

    Resolution

    12+Sign Bit

    Differential_nonlinearity

    1 LSB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    ±3.3 V

    Бренд

    Msl_level

    2A

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Tin/Lead

    Max_power_dissipation

    15 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    44

    Product_dimensions

    16.51 x 16.51 x 3.68 mm

    Schedule_b

    8542390000

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM12L458&&fileType=pdf

    Supplier_package

    PLCC

    Polarity_of_input_volt

    Bipolar

    Operating_supply_volt

    3, 3.3 V, 5.5

    Number_of_adcs

    1

    Digital_interface_type

    Parallel