ADC Dual Pipelined 80Msps 12-bit Parallel 64-Pin TQFP Tray, ADC12DL080CIVS/NOPB, Texas Instruments

The ADC12DL080 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 80 Megasamples per second (MSPS). This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption while providing excellent dynamic performance and a 600 MHz Full Power Bandwidth. Operating on a single +3.3V power supply, the ADC12DL080 achieves 11.0 effective bits at Nyquist and consumes just 447mW at 80 MSPS. The Power Down feature reduces power consumption to 50 mW.The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. Duty cycle stabilization and output data format are selectable. The output data can be set for offset binary or two"s complement.To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL080 can be connected to a separate supply voltage in the range of 2.4V to the analog supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of -40°C to +85°C. An evaluation board is available to ease the evaluation process. 

  • Single +3.3V Supply Operation
  • Internal Sample-and-Hold
  • Internal or External Reference
  • Outputs 2.4V to 3.6V Compatible
  • Power Down Mode
  • Duty Cycle Stabilizer
  • Pin Compatible with ADC12DL040, ADC12DL065, ADC12DL066
  • Resolution: 12 Bits
  • Max Conversion Rate: 80 MSPS
  • DNL: ±0.4 LSB (typ)
  • SNR (fIN=40MHz): 69 dB (typ)
  • SNR (fIN=200MHz): 67 dB(typ)
  • SFDR (fIN=40MHz): 82 dB (typ)
  • SFDR (fIN=200MHz): 81 dB (typ)
  • Power Consumption
    • Operating: 447 mW (typ)
    • Power Down Mode: 50 mW (typ)
  • Характеристики

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    80 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    12 Bit

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    69.3 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    2 V

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC12DL080&&fileType=pdf

    Supplier_package

    TQFP

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel

    Артикул: ADC12DL080CIVS/NOPB

    Описание

    The ADC12DL080 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 80 Megasamples per second (MSPS). This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption while providing excellent dynamic performance and a 600 MHz Full Power Bandwidth. Operating on a single +3.3V power supply, the ADC12DL080 achieves 11.0 effective bits at Nyquist and consumes just 447mW at 80 MSPS. The Power Down feature reduces power consumption to 50 mW.The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. Duty cycle stabilization and output data format are selectable. The output data can be set for offset binary or two"s complement.To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL080 can be connected to a separate supply voltage in the range of 2.4V to the analog supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of -40°C to +85°C. An evaluation board is available to ease the evaluation process. 

  • Single +3.3V Supply Operation
  • Internal Sample-and-Hold
  • Internal or External Reference
  • Outputs 2.4V to 3.6V Compatible
  • Power Down Mode
  • Duty Cycle Stabilizer
  • Pin Compatible with ADC12DL040, ADC12DL065, ADC12DL066
  • Resolution: 12 Bits
  • Max Conversion Rate: 80 MSPS
  • DNL: ±0.4 LSB (typ)
  • SNR (fIN=40MHz): 69 dB (typ)
  • SNR (fIN=200MHz): 67 dB(typ)
  • SFDR (fIN=40MHz): 82 dB (typ)
  • SFDR (fIN=200MHz): 81 dB (typ)
  • Power Consumption
    • Operating: 447 mW (typ)
    • Power Down Mode: 50 mW (typ)
  • Детали

    Volt_supply_source

    Analog and Digital

    Number_of_analog_inputs

    2

    Sampling_rate

    80 Msps

    Volt_reference

    External, Internal

    Digital_supply_support

    Yes

    Architecture

    Pipelined

    Resolution

    12 Bit

    Differential_nonlinearity

    1 LSB

    Signal_to_noise_ratio

    69.3 dB

    Input_type

    Voltage

    Input_signal_type

    Differential, Single-Ended

    Input_volt

    2 V

    Бренд

    Msl_level

    3

    Country_of_origin

    United States

    Eccn

    EAR99

    Htsn

    8542390001

    Lead_finish

    Matte Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Operating_temp

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1 mm

    Schedule_b

    8542390000

    Screening_level

    Industrial

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=ADC12DL080&&fileType=pdf

    Supplier_package

    TQFP

    Polarity_of_input_volt

    Unipolar

    Operating_supply_volt

    3, 3.3 V, 3.6

    Number_of_adcs

    2

    Digital_interface_type

    Parallel