Описание
The MAX1206 is a 3.3V, 12-bit analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input, driving the internal quantizer. The MAX1206 is optimized for low power, small size, and high dynamic performance. This ADC operates from a single 3.0V to 3.6V supply, consuming only 159mW, while delivering a typical signal-to-noise ratio (SNR) performance of 68.6dB at a 20MHz input frequency. The T/H-driven input stage accepts single-ended or differential inputs. In addition to low operating power, the MAX1206 features a 0.15mW power-down mode to conserve power during idle periods. A flexible reference structure allows the MAX1206 to use its internal precision bandgap reference or accept an externally applied reference. A common-mode reference is provided to simplify design and reduce external component count in differential analog input circuits. The MAX1206 supports both a single-ended and differential input clock drive. Wide variations in the clock duty cycle are compensated with the ADC"s internal duty-cycle equalizer. The MAX1206 features parallel, CMOS-compatible outputs. The digital output format is pin selectable to be either two"s complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate power input for the digital outputs accepts a voltage from 1.7V to 3.6V for flexible interfacing with various logic levels. The MAX1206 is available in a 6mm x 6mm x 0.8mm, 40- pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range. Refer to the MAX1209 and MAX1211 (see Pin-Compatible Higher/Speed Versions table) for applications that require high dynamic performance for IF input frequencies. See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.
- Excellent Dynamic Performance
- 68.6dB SNR at fIN = 20MHz
- 90dBc SFDR at fIN = 20MHz
- 159mW at 3.0V (Single-Ended Clock)
- 181mW at 3.3V (Single-Ended Clock)
- 198mW at 3.3V (Differential Clock)
