Описание
The MAX1782 smart battery-pack controller integrates a user-programmable microcontroller core, a coulomb-counting fuel gauge, a multi-channel data-acquisition unit, and an SMBus v1.1 compliant master/slave SMBus interface. The 8-bit, RISC microcontroller core has an integrated 8k bytes of user programmable EEPROM, which provides battery-pack designers with complete flexibility in developing fuel gauging and control algorithms. The MAX1782 is equipped with full ICE (in-circuit emulator) capability for efficient firmware development and debugging. The 16-bit data-acquisition unit measures individual cell voltages, cell stack voltage, chip internal/external temperature, and two general purpose analog inputs. Individual cell voltage measurements with 0.85% accuracy and over-current protection allow the MAX1782 to eliminate a separate 1st level protection IC. Adjustable over-current thresholds and delay timers provide a flexible solution. The MAX1782 provides an additional input which allows the protection MOSFETs to be forced off by external hardware. The integrating fuel gauge module provides a typical input offset of less than 1µV, and gain accuracy of better than 1.5% with no trimming required during pack manufacture. The MAX1782 has a wide 4V to 28V operating voltage range. The IC is available in a 7mm x 7mm 48-TQFN package with a maximum thickness of 0.8mm.
- Accurate Fuel Gauge Uses V to F Method
- < 1µV Input Offset Voltage
- < 1.5% Gain Accuracy
- No Calibration Required
- C Compiler
- Inline Assembler
- Individual Cell Voltage Measurements with 0.85% accuracy
- Built-In Protection MOSFET Gate Drivers
- 8% Accurate Overcurrent Protection
- Programmable Over-Current Delay Timers
