Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 32-Bit PIC32 PIC RISC 128KB Flash 2.5V/3.3V 64-Pin QFN EP Tube, PIC32MX130F128H-V/MR, Microchip

32-bit Microcontrollers (up to 512 KB Flash and 64 KB SRAM) with Audio/Graphics/Touch (HMI), CAN, USB, and Advanced Analog

Key FeaturesMicrocontroller FeaturesPeripheral FeaturesAudio/Graphics/Touch HMI FeaturesAdvanced Analog Features

  •     Up to 50 MHz/83 DMIPS, MIPS32® M4K® core    Three I2S/SPI modules for Codec and serial communications    Peripheral Pin Select (PPS) functionality    Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces    mTouch™ Capacitive touch    Temperature Range – 40°C to 105°C    Operating voltage range of 2.3V to 3.6V    128KB Flash memory (plus an additional 3 KB of Boot Flash)    16KB SRAM memory    MIPS16e® mode for up to 40% smaller code size    Low-power management modes (Sleep and Idle)    Peripheral Pin Select (PPS) functionality to allow function remap    4 channels of hardware DMA with automatic data size detection    Four UARTs (12.5 Mbps) and two I2C™ modules    Hardware Real-Time Clock and Calendar (RTCC)    Five 16-bit and up to two 32-bit Timers/Counters    Five Capture inputs and Five Compare/PWM outputs    External graphics interface with up to 34 PMP pins    Audio data communication: I2S, LJ, RJ, USB    Audio data control interface: SPI and I2C™    Audio data master clock:            Generation of fractional clock frequencies        Can be synchronized with USB clock        Can be tuned in run-time            Supports mTouch™ capacitive touch sensingDebugger Development Support    ADC Module:            10-bit 1Msps rate with one Sample and Hold (S&H)        28 analog inputs        Can operate during sleep mode            Flexible and independent ADC trigger sources    Comparators:            Three dual-input Comparator modules        Programmable references with 32 voltage points                In-circuit and in-application programming        4-wire MIPS® Enhanced JTAG interface        Unlimited program and six complex data breakpoints        IEEE 1149.2-compatible (JTAG) boundary scan

    • Характеристики

    Program_memory_size

    128 KB
    Number_of_timers

    5
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 105 °C
    Pin_count

    64
    Product_dimensions

    9 x 9 x 0.88
    Mounting

    Surface Mount
    Ram_size

    16 Kb
    Schedule_b

    8542310000
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0008922740/MCHP-S-A0008922797-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    QFN EP
    Msl_level

    1
    Min_operating_supply_voltage

    2.3 V
    Бренд

    Country_of_origin

    China
    Eccn

    3A991.A.2
    Htsn

    8542310001
    Max_speed

    40 MHz
    Instruction_set_architecture

    RISC
    Тип интерфейса

    I2C/I2S/SPI/UART
    Lead_finish

    Matte Tin
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Артикул: PIC32MX130F128H-V/MR

    Описание

    32-bit Microcontrollers (up to 512 KB Flash and 64 KB SRAM) with Audio/Graphics/Touch (HMI), CAN, USB, and Advanced Analog

    Key FeaturesMicrocontroller FeaturesPeripheral FeaturesAudio/Graphics/Touch HMI FeaturesAdvanced Analog Features

  •     Up to 50 MHz/83 DMIPS, MIPS32® M4K® core    Three I2S/SPI modules for Codec and serial communications    Peripheral Pin Select (PPS) functionality    Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces    mTouch™ Capacitive touch    Temperature Range – 40°C to 105°C    Operating voltage range of 2.3V to 3.6V    128KB Flash memory (plus an additional 3 KB of Boot Flash)    16KB SRAM memory    MIPS16e® mode for up to 40% smaller code size    Low-power management modes (Sleep and Idle)    Peripheral Pin Select (PPS) functionality to allow function remap    4 channels of hardware DMA with automatic data size detection    Four UARTs (12.5 Mbps) and two I2C™ modules    Hardware Real-Time Clock and Calendar (RTCC)    Five 16-bit and up to two 32-bit Timers/Counters    Five Capture inputs and Five Compare/PWM outputs    External graphics interface with up to 34 PMP pins    Audio data communication: I2S, LJ, RJ, USB    Audio data control interface: SPI and I2C™    Audio data master clock:            Generation of fractional clock frequencies        Can be synchronized with USB clock        Can be tuned in run-time            Supports mTouch™ capacitive touch sensingDebugger Development Support    ADC Module:            10-bit 1Msps rate with one Sample and Hold (S&H)        28 analog inputs        Can operate during sleep mode            Flexible and independent ADC trigger sources    Comparators:            Three dual-input Comparator modules        Programmable references with 32 voltage points                In-circuit and in-application programming        4-wire MIPS® Enhanced JTAG interface        Unlimited program and six complex data breakpoints        IEEE 1149.2-compatible (JTAG) boundary scan

    • Детали

    Program_memory_size

    128 KB
    Number_of_timers

    5
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 105 °C
    Pin_count

    64
    Product_dimensions

    9 x 9 x 0.88
    Mounting

    Surface Mount
    Ram_size

    16 Kb
    Schedule_b

    8542310000
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0008922740/MCHP-S-A0008922797-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    QFN EP
    Msl_level

    1
    Min_operating_supply_voltage

    2.3 V
    Бренд

    Country_of_origin

    China
    Eccn

    3A991.A.2
    Htsn

    8542310001
    Max_speed

    40 MHz
    Instruction_set_architecture

    RISC
    Тип интерфейса

    I2C/I2S/SPI/UART
    Lead_finish

    Matte Tin
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C

    Похожие товары