MCU 16-bit TLCS-900 CISC 128KB Flash 3.3V 64-Pin LQFP, TMP91FW27UG(JZ), Toshiba

TMP91FW27 is a high-speed 16-bit microcontroller designed for the control of various mid-to large-scale equipment. TMP91FW27UG and TMP91FW27FG come in a 64-pin flat package. Listed below are the features.

  • High-speed 16-bit CPU (900/L1 CPU)
    • Instruction mnemonics are upward-compatible with TLCS-90/900
    • 16 Mbytes of linear address space
    • General-purpose registers and register banks
    • 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
    • Micro DMA: 4 channels (593 ns /2 bytes at 27 MHz)
  • Minimum instruction execution time: 148 ns (at 27 MHz)
  • Built-in RAM: 12 Kbytes
    • Built-in ROM: 128-Kbyte Flash memory
    • 4-Kbyte mask ROM (used for booting)
  • External memory expansion
    • Expandable up to 16 Mbytes (shared program/data area)
    • Can simultaneously support 8-/16-bit width external data bus (Dynamic data bus sizing)
  • 8-bit timers: 6 channels
  • 16-bit timers: 1 channel
  • General-purpose serial interface: 2 channels
    • UART/Synchronous mode: 2 channels
    • IrDA Ver.1.0 (115.2 kbps) mode selectable: 1 channel
  • Serial bus interface: 1 channel
    • I²C bus mode/clock synchronous mode selectable
  • 10-bit AD converter (sample hold circuit is inside): 4 channels
  • Watchdog timer
  • Special timer for CLOCK
  • Chip select/Wait controller: 4 blocks
  • Interrupts: 34 interrupts
    • 9 CPU interrupts: Software interrupt instruction and illegal instruction
    • 21 internal interrupts: 7 priority levels are selectable
    • 4 external interrupts: 7 priority levels are selectable(among 3 interrupts are selectable edge mode)
  • Input/output ports: 53 pins
  • Stand-by function
    • Three Halt modes: IDLE2 (programmable), IDLE1 and STOP
  • Clock controller
    • Clock gear function: Select a High-frequency clock fc to fc/16
    • Special timer for CLOCK (fs = 32.768 kHz)
  • Operating voltage
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory read operation)
    • Vcc = 2.2 V to 3.6 V (fc max = 16 MHz, flash memory read operation)
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory erase/program operations)
  • Package
    • LQFP64-P-1010-0.50D (TMP91FW27UG)
    • QFP64-P-1414-0.80A (TMP91FW27FG)

Характеристики

Schedule_b

8542310000

Number_of_timers

7

Operating_temperature

-40 to 85 °C

Pin_count

64

Product_dimensions

10 x 10 x 1.4 mm

Specifications

http://toshiba.semicon-storage.com/info/docget.jsp?did=10173&prodName=TMP91FW27UG

Watchdog

1

Max_speed

27 MHz

Operating_supply_voltage

3.3 V

Country_of_origin

Japan

Бренд

Data_bus_width

16 Bit

Eccn

EAR99

Htsn

8542310001

Тип интерфейса

I2C/UART

Number_of_programmable_i_os

53

Lead_finish

Gold, Tin/Bismuth, Tin/Silver

Mounting

Surface Mount

Артикул: TMP91FW27UG(JZ)

Описание

TMP91FW27 is a high-speed 16-bit microcontroller designed for the control of various mid-to large-scale equipment. TMP91FW27UG and TMP91FW27FG come in a 64-pin flat package. Listed below are the features.

  • High-speed 16-bit CPU (900/L1 CPU)
    • Instruction mnemonics are upward-compatible with TLCS-90/900
    • 16 Mbytes of linear address space
    • General-purpose registers and register banks
    • 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
    • Micro DMA: 4 channels (593 ns /2 bytes at 27 MHz)
  • Minimum instruction execution time: 148 ns (at 27 MHz)
  • Built-in RAM: 12 Kbytes
    • Built-in ROM: 128-Kbyte Flash memory
    • 4-Kbyte mask ROM (used for booting)
  • External memory expansion
    • Expandable up to 16 Mbytes (shared program/data area)
    • Can simultaneously support 8-/16-bit width external data bus (Dynamic data bus sizing)
  • 8-bit timers: 6 channels
  • 16-bit timers: 1 channel
  • General-purpose serial interface: 2 channels
    • UART/Synchronous mode: 2 channels
    • IrDA Ver.1.0 (115.2 kbps) mode selectable: 1 channel
  • Serial bus interface: 1 channel
    • I²C bus mode/clock synchronous mode selectable
  • 10-bit AD converter (sample hold circuit is inside): 4 channels
  • Watchdog timer
  • Special timer for CLOCK
  • Chip select/Wait controller: 4 blocks
  • Interrupts: 34 interrupts
    • 9 CPU interrupts: Software interrupt instruction and illegal instruction
    • 21 internal interrupts: 7 priority levels are selectable
    • 4 external interrupts: 7 priority levels are selectable(among 3 interrupts are selectable edge mode)
  • Input/output ports: 53 pins
  • Stand-by function
    • Three Halt modes: IDLE2 (programmable), IDLE1 and STOP
  • Clock controller
    • Clock gear function: Select a High-frequency clock fc to fc/16
    • Special timer for CLOCK (fs = 32.768 kHz)
  • Operating voltage
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory read operation)
    • Vcc = 2.2 V to 3.6 V (fc max = 16 MHz, flash memory read operation)
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory erase/program operations)
  • Package
    • LQFP64-P-1010-0.50D (TMP91FW27UG)
    • QFP64-P-1414-0.80A (TMP91FW27FG)

Детали

Schedule_b

8542310000

Number_of_timers

7

Operating_temperature

-40 to 85 °C

Pin_count

64

Product_dimensions

10 x 10 x 1.4 mm

Specifications

http://toshiba.semicon-storage.com/info/docget.jsp?did=10173&prodName=TMP91FW27UG

Watchdog

1

Max_speed

27 MHz

Operating_supply_voltage

3.3 V

Country_of_origin

Japan

Бренд

Data_bus_width

16 Bit

Eccn

EAR99

Htsn

8542310001

Тип интерфейса

I2C/UART

Number_of_programmable_i_os

53

Lead_finish

Gold, Tin/Bismuth, Tin/Silver

Mounting

Surface Mount