MCU 16-bit MSP430 RISC 32KB Flash 2.5V/3.3V 64-Pin LQFP Tray, MSP430F427AIPM, Texas Instruments

The Texas InstrumentsMSP430 family of ultra-low power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.The MSP430F42xA series are microcontroller configurations with three independent 16-bit sigma-delta A/D converters, each with an integrated differential programmable gain amplifier input stage. Also included are a built-in 16-bit timer, 128 LCD segment drive capability, hardware multiplier, and 14 I/O pins.Typical applications include high-resolution applications such as handheld metering equipment, weigh scales, and energy meters. 

  • Ultra-Low Power Consumption:
    • Active Mode: 400 µA at 1 MHz, 3.0 V
    • Standby Mode: 1.6 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Wake-Up From Standby Mode in Less Than 6 µs
  • Frequency-Locked Loop, FLL+
  • 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
  • Three Independent 16-bit Sigma-Delta A/D Converters With Differential PGA Inputs
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • Integrated LCD Driver for 128 Segments
  • Serial Communication Interface (USART), Asynchronous UART, or Synchronous SPI Selectable by Software
  • Brownout Detector
  • Supply Voltage Supervisor/Monitor With Programmable Level Detection
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootstrap Loader in Flash Devices
  • Family Members Include:
    • MSP430F423A:
         8KB + 256B Flash Memory, 256B RAM
    • MSP430F425A:
         16KB + 256B Flash Memory, 512B RAM
    • MSP430F427A:
         32KB + 256B Flash Memory, 1KB RAM
  • Available in 64-Pin Quad Flat Pack (QFP)
  • Характеристики

    Schedule_b

    8542310000

    Operating_supply_voltage

    2.5, 3.3 V

    Operating_temperature

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1.4 mm

    Program_memory_size

    32 Kb

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F427A&&fileType=pdf

    Supplier_package

    LQFP

    Max_speed

    12 MHz

    Number_of_timers

    1

    Бренд

    Instruction_set_architecture

    RISC

    Country_of_origin

    Philippines

    Data_bus_width

    16 Bit

    Eccn

    EAR99

    Htsn

    8542310001

    Тип интерфейса

    SPI/UART/USART

    Number_of_programmable_i_os

    14

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Msl_level

    3

    SKU: MSP430F427AIPM

    Description

    The Texas InstrumentsMSP430 family of ultra-low power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.The MSP430F42xA series are microcontroller configurations with three independent 16-bit sigma-delta A/D converters, each with an integrated differential programmable gain amplifier input stage. Also included are a built-in 16-bit timer, 128 LCD segment drive capability, hardware multiplier, and 14 I/O pins.Typical applications include high-resolution applications such as handheld metering equipment, weigh scales, and energy meters. 

  • Ultra-Low Power Consumption:
    • Active Mode: 400 µA at 1 MHz, 3.0 V
    • Standby Mode: 1.6 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Wake-Up From Standby Mode in Less Than 6 µs
  • Frequency-Locked Loop, FLL+
  • 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
  • Three Independent 16-bit Sigma-Delta A/D Converters With Differential PGA Inputs
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • Integrated LCD Driver for 128 Segments
  • Serial Communication Interface (USART), Asynchronous UART, or Synchronous SPI Selectable by Software
  • Brownout Detector
  • Supply Voltage Supervisor/Monitor With Programmable Level Detection
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootstrap Loader in Flash Devices
  • Family Members Include:
    • MSP430F423A:
         8KB + 256B Flash Memory, 256B RAM
    • MSP430F425A:
         16KB + 256B Flash Memory, 512B RAM
    • MSP430F427A:
         32KB + 256B Flash Memory, 1KB RAM
  • Available in 64-Pin Quad Flat Pack (QFP)
  • Additional information

    Schedule_b

    8542310000

    Operating_supply_voltage

    2.5, 3.3 V

    Operating_temperature

    -40 to 85 °C

    Pin_count

    64

    Product_dimensions

    10 x 10 x 1.4 mm

    Program_memory_size

    32 Kb

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F427A&&fileType=pdf

    Supplier_package

    LQFP

    Max_speed

    12 MHz

    Number_of_timers

    1

    Бренд

    Instruction_set_architecture

    RISC

    Country_of_origin

    Philippines

    Data_bus_width

    16 Bit

    Eccn

    EAR99

    Htsn

    8542310001

    Тип интерфейса

    SPI/UART/USART

    Number_of_programmable_i_os

    14

    Lead_finish

    Gold

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Msl_level

    3