Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 16-bit MSP430 RISC 256KB Flash 2.5V/3.3V 100-Pin LQFP Tray, MSP430BT5190IPZ, Texas Instruments

The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs. MSP430BT5190 is a microcontroller configuration with three 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), four universal serial communication interfaces (USCIs), a hardware multiplier, DMA, a real-time clock module with alarm capabilities, and 87 I/O pins. The MSP430BT5190 microcontroller is designed for commercial use with TI"s CC2560 based Bluetooth solutions in conjunction with Mindtree"s Ethermind Bluetooth stack and Serial Port Profile (SPP). This MSP430BT5190+CC2560 Bluetooth platform is ideal for applications that need a wireless serial link for cable replacement, such as remote controls, thermostats, smart metering, blood glucose meters, pulseoximeters, and many others.

  • Designed for Use With CC2560 TI Bluetooth® Based Solutions
  • Commercially Licensed Mindtree Ethermind Bluetooth Stack for MSP430
    • Bluetooth v2.1 + Enhanced Data Rate (EDR) Compliant
    • Serial Port Profile (SPP)
    • Sample Applications
  • Low Supply Voltage Range: 3.6 V Down to 1.8 V
  • Ultralow-Power Consumption
    • Active Mode (AM):
      All System Clocks Active
      230 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
      110 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
    • Standby Mode (LPM3):
      Real-Time Clock With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.7 µA at 2.2 V, 2.1 µA at 3 V (Typical)
      Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.2 µA at 3 V (Typical)
    • Off Mode (LPM4):
      Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up:
      1.2 µA at 3 V (Typical)
    • Shutdown Mode (LPM4.5):
      0.1 µA at 3 V (Typical)
  • Wake Up From Standby Mode in Less Than 5 µs
  • 16-Bit RISC Architecture
  • Flexible Power Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals
    • High-Frequency Crystals up to 32 MHz
  • 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
  • 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
  • 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
  • Up to Four Universal Serial Communication Interfaces
    • USCI_A0, USCI_A1, USCI_A2, and USCI_A3 Each Support:
      Enhanced UART Supports Auto-Baudrate Detection
      IrDA Encoder and Decoder
      Synchronous SPI
    • USCI_B0, USCI_B1, USCI_B2, and USCI_B3 Each Support:
      I2C
      Synchronous SPI
  • 12-Bit Analog-to-Digital Converter (ADC)
    • Internal Reference
    • 14 External Channels, 2 Internal Channels
  • Hardware Multiplier Supports 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Three-Channel Internal DMA
  • Basic Timer With Real-Time Clock Feature

    • Характеристики

    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    100
    Product_dimensions

    14 x 14 x 1.4 mm
    Program_memory_size

    256 KB
    Ram_size

    16 Kb
    On_chip_adc

    16-chx12-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430BT5190&&fileType=pdf
    Supplier_package

    LQFP
    Watchdog

    1
    Max_speed

    25 MHz
    Number_of_timers

    3
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    United States
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    87
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    3
    Артикул: MSP430BT5190IPZ

    Описание

    The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs. MSP430BT5190 is a microcontroller configuration with three 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), four universal serial communication interfaces (USCIs), a hardware multiplier, DMA, a real-time clock module with alarm capabilities, and 87 I/O pins. The MSP430BT5190 microcontroller is designed for commercial use with TI"s CC2560 based Bluetooth solutions in conjunction with Mindtree"s Ethermind Bluetooth stack and Serial Port Profile (SPP). This MSP430BT5190+CC2560 Bluetooth platform is ideal for applications that need a wireless serial link for cable replacement, such as remote controls, thermostats, smart metering, blood glucose meters, pulseoximeters, and many others.

  • Designed for Use With CC2560 TI Bluetooth® Based Solutions
  • Commercially Licensed Mindtree Ethermind Bluetooth Stack for MSP430
    • Bluetooth v2.1 + Enhanced Data Rate (EDR) Compliant
    • Serial Port Profile (SPP)
    • Sample Applications
  • Low Supply Voltage Range: 3.6 V Down to 1.8 V
  • Ultralow-Power Consumption
    • Active Mode (AM):
      All System Clocks Active
      230 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
      110 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
    • Standby Mode (LPM3):
      Real-Time Clock With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.7 µA at 2.2 V, 2.1 µA at 3 V (Typical)
      Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.2 µA at 3 V (Typical)
    • Off Mode (LPM4):
      Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up:
      1.2 µA at 3 V (Typical)
    • Shutdown Mode (LPM4.5):
      0.1 µA at 3 V (Typical)
  • Wake Up From Standby Mode in Less Than 5 µs
  • 16-Bit RISC Architecture
  • Flexible Power Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals
    • High-Frequency Crystals up to 32 MHz
  • 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
  • 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
  • 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
  • Up to Four Universal Serial Communication Interfaces
    • USCI_A0, USCI_A1, USCI_A2, and USCI_A3 Each Support:
      Enhanced UART Supports Auto-Baudrate Detection
      IrDA Encoder and Decoder
      Synchronous SPI
    • USCI_B0, USCI_B1, USCI_B2, and USCI_B3 Each Support:
      I2C
      Synchronous SPI
  • 12-Bit Analog-to-Digital Converter (ADC)
    • Internal Reference
    • 14 External Channels, 2 Internal Channels
  • Hardware Multiplier Supports 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Three-Channel Internal DMA
  • Basic Timer With Real-Time Clock Feature

    • Детали

    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    100
    Product_dimensions

    14 x 14 x 1.4 mm
    Program_memory_size

    256 KB
    Ram_size

    16 Kb
    On_chip_adc

    16-chx12-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430BT5190&&fileType=pdf
    Supplier_package

    LQFP
    Watchdog

    1
    Max_speed

    25 MHz
    Number_of_timers

    3
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    United States
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    87
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    3

    Похожие товары