MCU 16-bit TLCS-900/L1 CISC 256KB Flash 3.3V 100-Pin LQFP, TMP91FY42FG(JZ), Toshiba

TMP91FY42 is a high-speed 16-bit microcontroller designed for the control of various mid- to large-scale equipment. TMP91FY42 comes in a 100-pin flat package.

  • High-speed 16-bit CPU (900/L1 CPU)
    • Instruction mnemonics are upward-compatible with TLCS-90/900
    • General-purpose registers and register banks
    • 16 Mbytes of linear address space
    • 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
    • Micro DMA: 4-channels (593 ns/2 bytes at 27 MHz)
  • Minimum instruction execution time: 148 ns (at 27 MHz)
  • Built-in RAM: 16 Kbytes
    • Built-in ROM: 256 Kbytes Flash memory
    • 4 Kbytes mask ROM (used for booting)
  • External memory expansion
    • Expandable up to 16 Mbytes (shared program/data area)
    • Can simultaneously support 8-/16-bit width external data bus Dynamic data bus sizing
  • 8-bit timers: 8 channels
  • 16-bit timer/event counter: 2 channels
  • General-purpose serial interface: 2 channels
    • UART/ Synchronous mode: 2 channels
    • IrDA ver1.0 (115.2 kbps) supported: 1 channel
  • Serial bus interface: 1 channel
    • I²C bus mode/clock synchronous Select mode
  • 10-bit AD converter (built-in sample hold circuit): 8 channels
  • Watchdog timer
  • Special timer for clock
  • Chip Select/Wait controller: 4 channels
  • Interrupts: 45 interrupts
    • 9 CPU interrupts: Software interrupt instruction and illegal instruction
    • 26 internal interrupts:
    • 10 external interrupts:
  • Input/Output ports: 81 pins
  • Standby function
    • Three HALT modes: IDLE2 (programmable), IDLE1, STOP
  • Clock controller
    • Clock Gear function: Select a high-frequency clock (fc to fc/16)
    • Special timer for CLOCK (fs = 32.768 kHz)
  • Operating voltage
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory read operation)
    • Vcc = 3.0 V to 3.6 V (fc max = 27 MHz, flash memory erase/program operations)
  • Package: 100-pin LQFP

Характеристики

Schedule_b

8542310000

Бренд

Operating_temperature

-40 to 85 °C

Pin_count

100

Product_dimensions

14 x 14 x 1.4 mm

Program_memory_size

256 KB

Ram_size

16 Kb

On_chip_adc

8-chx10-bit

Specifications

http://toshiba.semicon-storage.com/info/docget.jsp?did=10147&prodName=TMP91FY42FG

Supplier_package

LQFP

Watchdog

1

Max_speed

27 MHz

Number_of_timers

10

Operating_supply_voltage

3.3 V

Country_of_origin

Japan

Instruction_set_architecture

CISC

Data_bus_width

16 Bit

Eccn

EAR99

Htsn

8542310001

Тип интерфейса

I2C/IrDA/UART

Number_of_programmable_i_os

81

Lead_finish

Gold, Tin/Bismuth, Tin/Silver

Max_expanded_memory_size

16 MB

Max_operating_supply_voltage

3.6 V

Max_power_dissipation

600 mW

Max_processing_temp

260

Min_operating_supply_voltage

2.7 V

Mounting

Surface Mount

Артикул: TMP91FY42FG(JZ)

Описание

TMP91FY42 is a high-speed 16-bit microcontroller designed for the control of various mid- to large-scale equipment. TMP91FY42 comes in a 100-pin flat package.

  • High-speed 16-bit CPU (900/L1 CPU)
    • Instruction mnemonics are upward-compatible with TLCS-90/900
    • General-purpose registers and register banks
    • 16 Mbytes of linear address space
    • 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
    • Micro DMA: 4-channels (593 ns/2 bytes at 27 MHz)
  • Minimum instruction execution time: 148 ns (at 27 MHz)
  • Built-in RAM: 16 Kbytes
    • Built-in ROM: 256 Kbytes Flash memory
    • 4 Kbytes mask ROM (used for booting)
  • External memory expansion
    • Expandable up to 16 Mbytes (shared program/data area)
    • Can simultaneously support 8-/16-bit width external data bus Dynamic data bus sizing
  • 8-bit timers: 8 channels
  • 16-bit timer/event counter: 2 channels
  • General-purpose serial interface: 2 channels
    • UART/ Synchronous mode: 2 channels
    • IrDA ver1.0 (115.2 kbps) supported: 1 channel
  • Serial bus interface: 1 channel
    • I²C bus mode/clock synchronous Select mode
  • 10-bit AD converter (built-in sample hold circuit): 8 channels
  • Watchdog timer
  • Special timer for clock
  • Chip Select/Wait controller: 4 channels
  • Interrupts: 45 interrupts
    • 9 CPU interrupts: Software interrupt instruction and illegal instruction
    • 26 internal interrupts:
    • 10 external interrupts:
  • Input/Output ports: 81 pins
  • Standby function
    • Three HALT modes: IDLE2 (programmable), IDLE1, STOP
  • Clock controller
    • Clock Gear function: Select a high-frequency clock (fc to fc/16)
    • Special timer for CLOCK (fs = 32.768 kHz)
  • Operating voltage
    • Vcc = 2.7 V to 3.6 V (fc max = 27 MHz, flash memory read operation)
    • Vcc = 3.0 V to 3.6 V (fc max = 27 MHz, flash memory erase/program operations)
  • Package: 100-pin LQFP

Детали

Schedule_b

8542310000

Бренд

Operating_temperature

-40 to 85 °C

Pin_count

100

Product_dimensions

14 x 14 x 1.4 mm

Program_memory_size

256 KB

Ram_size

16 Kb

On_chip_adc

8-chx10-bit

Specifications

http://toshiba.semicon-storage.com/info/docget.jsp?did=10147&prodName=TMP91FY42FG

Supplier_package

LQFP

Watchdog

1

Max_speed

27 MHz

Number_of_timers

10

Operating_supply_voltage

3.3 V

Country_of_origin

Japan

Instruction_set_architecture

CISC

Data_bus_width

16 Bit

Eccn

EAR99

Htsn

8542310001

Тип интерфейса

I2C/IrDA/UART

Number_of_programmable_i_os

81

Lead_finish

Gold, Tin/Bismuth, Tin/Silver

Max_expanded_memory_size

16 MB

Max_operating_supply_voltage

3.6 V

Max_power_dissipation

600 mW

Max_processing_temp

260

Min_operating_supply_voltage

2.7 V

Mounting

Surface Mount